Thingiverse
Bibo2 AccuRemote Depth Gauge Holder by 2hot6ft2
by Thingiverse
Last crawled date: 3 years ago
A remix of the design by fuho to fit the Bibo2 Touch.
The original can be found here: https://www.thingiverse.com/thing:1327096
The gauge used is here: https://www.amazon.com/gp/product/B0071SKHAW/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=e07f-20&linkId=d82299e2457b9b152cf5b2472c0fdb6c
Made 2 versions since I have changed out my extruder fans to another style as shown in the pictures.
The depth rod goes behind the front fan (hot end fan).
Some of the mods I made were:
A slot for the back of the gauge to slip into.
Made it so the gauge faces forward on the Bibo.
Made it thicker so it would line up with the opening behind the front fan (hot end fan).
Added 0.2mm to each clip that holds the gauge so it doesn't wobble (move).
Added material to the fan clips to hold onto my new fans snugly.
Ignore the blue tape on the front of my linear bearing that's just to cut down on glare on the IP cam I use to keep an eye on things.
The original can be found here: https://www.thingiverse.com/thing:1327096
The gauge used is here: https://www.amazon.com/gp/product/B0071SKHAW/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=e07f-20&linkId=d82299e2457b9b152cf5b2472c0fdb6c
Made 2 versions since I have changed out my extruder fans to another style as shown in the pictures.
The depth rod goes behind the front fan (hot end fan).
Some of the mods I made were:
A slot for the back of the gauge to slip into.
Made it so the gauge faces forward on the Bibo.
Made it thicker so it would line up with the opening behind the front fan (hot end fan).
Added 0.2mm to each clip that holds the gauge so it doesn't wobble (move).
Added material to the fan clips to hold onto my new fans snugly.
Ignore the blue tape on the front of my linear bearing that's just to cut down on glare on the IP cam I use to keep an eye on things.
Similar models
thingiverse
free
New lowered fan support for SmartrapCore 1.2x by BrunoBellamy
...eaves room for the fanduct to also cool the printing zone.
so, if you like cool stuff, this is exactly the device you need ! :)
thingiverse
free
MPSM Alternative Hot End Mount for Drop In Fan Shroud. Get rid of the clips. by BWH
...//www.thingiverse.com/thing:2897583
the screw holes may print a little funny, but it doesn't really affect the functionality.
thingiverse
free
Reach3d Ashaman enclosure circular duct by Tymmy
... ) but i wanted a 360 fan duct.
it holds onto my 5015 fan no problems, but i've also added some hot glue for peace of mind.
thingiverse
free
MM3 Fan Duct for dual extruder by MortarArt
...urround the hot end downwards, in the hope that it improves airflow.
added an updated version. apologies for the horrible meshes.
thingiverse
free
Front mount for E3D with dual fans and proximity sensor by Joe558
...http://www.thingiverse.com/thing:1091103
you will need to place a washer behind the extruder to line up the extruder and hot end.
thingiverse
free
30mm Fan Adapter - CR-10 E3D Volcano by noylekul
...t ends, so i made an adapter. after printing the fang i cut the ears off that hold the intended fan and just glued in my adapter.
thingiverse
free
Creality Ender CR10 Single Blower & BL Touch
...// y offset: -front +behind [the nozzle]
feel free to see my direct drive version here: https://www.thingiverse.com/thing:4109226
thingiverse
free
Printrbot simple 1405 bottom by gerdescm
...his bottom since you will be reducing airflow. the fan mount i used can be found here:
http://www.thingiverse.com/thing:376515
thingiverse
free
Ultimaker Dial Gauge Holder by Thedudevt
...igns were too permanent, so i made my own. the clip feature is based on j-spar's thing http://www.thingiverse.com/thing:16630
thingiverse
free
Stock Hot End Mount for FLSun Cube carriage modification by nigel42
... sensor here: https://www.thingiverse.com/thing:2885298
and a compatible fan duct here: https://www.thingiverse.com/thing:2995919
Accuremote
thingiverse
free
AccuRemote Depth Gauge Holder by trth
...
this holds all of the parts that came with the accuremote depth gauge holder that i purchased for leveling my printer's bed.
thingiverse
free
AccuRemote Electronic Digital Indicator For MK5 by Krythis
...for the accuremote electronic digital indicator for mk5 etruder assembly by lawsy,
built in support, no need for added support.
thingiverse
free
TramDozeR by funkshin
...by funkshin thingiverse this is a carriage for a accuremote digital depth gauge/indicator. it is designed to fit in...
thingiverse
free
Printrbot Depth Gauge / Dial Gauge Bed Leveling Mount by trth
...printrbot bed. this is a bracket to hold the accuremote depth...
thingiverse
free
Dial Indicator Holder Makerbot rep 2 by ItchyPigcreations
...snap on dial indicator made to fit this one: accuremote 0-1"/0.0005" digital electronic indicator gage gauge w/ absolute and...
thingiverse
free
WANHAO Duplicator 4S Depth Gauge Holder (Leveling Simplifier) by fuho
...simplifier) by fuho thingiverse this a a holder for accuremote depth gauge from amazon. found a nice spot right...
thingiverse
free
MakerGear M2 Dial Indicator Mount by Danimal_3D
...mount by danimal_3d thingiverse use this mount with a accuremote dial indicator. this tool bolts directly onto the makergear...
thingiverse
free
Dial Indicator Mount for Shapeoko 2 Rotary Tool Holder by 1ProjectAWeek
...the shapeoko 2 rotary tool holder. sized for a accuremote digital indicator: https://www.amazon.com/gp/product/b006yd7g36/ref=as_li_qf_sp_asin_il_tl?ie=utf8&camp=1789&creative=9325&creativeasin=b006yd7g36&linkcode=as2&tag=illc0mmunicat-20&linkid=mrgnx2v26ltazzpa based this off of lordmundi's pen...
thingiverse
free
Rostock Max V2 - Digital Dial Indicator Holder for advanced Delta Calibration by Artesian
...but with no specific temperature limitations. this piece fits: https://www.amazon.com/accuremoteelectronic-indicator-functions-conversion/dp/b006yd7g36/ref=sr_1_25?ie=utf8&qid=1465888680&sr=8-25&keywords=dial+indicator and can be attached with 3x m3 or 6/32...
2Hot6Ft2
thingiverse
free
Eagle liftgate handles by 2hot6ft2
...ute to be able to push it on since i used 4 top, bottom and perimeter shells. it would have been more flexible with fewer shells.
thingiverse
free
50Amp RV power cord cover by 2hot6ft2
...have coming out of my mep-802a military generator to keep it from getting a lot of dirt and stuff in the terminals when it rains.
thingiverse
free
gooi tweezer holder organizer and tip protectors by 2hot6ft2
...ded something to keep my gooi tweezers organized and to protect myself from their very sharp points. this is what i came up with.
thingiverse
free
Stinger UV801 bulb retainer by 2hot6ft2
... the missing one.
made it with pla green first but it broke at the clip so reprinted it in petg yellow which worked a lot better.
thingiverse
free
Bibo2 extruder leveling block by 2hot6ft2
...he other side.
made it thinner so it uses less material.
changed the height to 29mm to better accommodate the feeders i am using.
thingiverse
free
Grease Zerk Cap by 2hot6ft2
...go greasing. later i'll even put some on the truck for just that reason.
they fit nice and snug so i doubt any will fall off.
thingiverse
free
RV awning hooks for hanging feeders etc. by 2hot6ft2
...ts.
it's 2 part so print 2 of them and glue them together then just slide them in the awning track to wherever you want them.
thingiverse
free
Bibo2 Touch Snap Hinge by 2hot6ft2
...king the pictures so it should fit even better now).
this also eliminates the need for the spacers on the bibo2's door hinge.
thingiverse
free
Ant Moat remix by 2hot6ft2
...ir bases
sliced the model so it has a real flat surface to place on the bed
in the pictures the green is pla and the blue is petg
thingiverse
free
2 5/16" tow hitch ball cover by 2hot6ft2
...k wall so it should last a long time.
helps keep me from getting grease on my shin when i bump into it and provides some cushion.
Bibo2
thingiverse
free
Bibo2 Touch Snap Hinge by 2hot6ft2
...king the pictures so it should fit even better now).
this also eliminates the need for the spacers on the bibo2's door hinge.
thingiverse
free
LM8SUU fitting for BIBO2 carriage by Bentos
...extruder carriage on my bibo2 touch. thin part goes between bearing and carriage, the other below.
re-use the original hex bolts.
thingiverse
free
BIBO 3d printer BIBO2 touch fan supports by bradenking
...bibo 3d printer bibo2 touch fan supports by bradenking
thingiverse
bibo 3d printer bibo2 touch fan supports
thingiverse
free
MK8 extruder adapter for BIBO2 by Bentos
...truder.
created two versions. one has radial cooling channels, though the airflow may in some cases be blocked by the extruder...
thingiverse
free
Bibo2 door Hing threaded backing plates by bman2000
...iginal and new designs to the bibo2 printer without the difficulties of holding the nuts in the confined space inside the printer
thingiverse
free
BIBO2 Touch Blower Fan Duct w. BLTouch Probe
...for the bltouch autobed sensing and leveling probe.
be sure to print with supports from bed as the bltouch probe has an overhang.
thingiverse
free
BIBO2 Touch Sane Filament Sensor Mounts by Hackschnitzel
...t doesn't really matter.
i used these connectors to go to the original connector: https://www.amazon.de/gp/product/b0782xkjwt
thingiverse
free
Bibo2 extruder leveling block by 2hot6ft2
...he other side.
made it thinner so it uses less material.
changed the height to 29mm to better accommodate the feeders i am using.
thingiverse
free
BIBO2 Touch Y-Axis Damper Mount by Hackschnitzel
...ease file the inside properly to not damage your belt.
print with 3 shells on a 0.4mm nozzle to save your printer some stress :-)
thingiverse
free
BIBO2 Filament guide and filament switch mount by memmop
..._5&algo_expid=ea925abe-de8f-437a-8263-9c288fd3d783-0&algo_pvid=ea925abe-de8f-437a-8263-9c288fd3d783&pricebeautifyab=3
Gauge
3d_ocean
$10
Gauges
...rim to them. each gauge has an xpresso tag to give them an automatic animation without the need for keyframing and can be chan...
3d_export
$5
pressure gauge
...pressure gauge
3dexport
pressure gauge
3d_export
$5
gauge protector
...gauge protector
3dexport
gauge protector
3d_export
$5
Gauge 3D Model
...gauge 3d model
3dexport
gauge pressure gas air liquid
gauge 3d model fau 71180 3dexport
3d_export
$5
protected pressure gauge
...protected pressure gauge
3dexport
protected pressure gauge
3d_export
$5
hard gauge protector
...hard gauge protector
3dexport
hard gauge protector
turbosquid
$29
Screw Gauge
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$29
Marking Gauge
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Blade Gauge
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
12 Gauge 3D Model
...12 gauge 3d model
3dexport
shotgun shell gauge 12
12 gauge 3d model pirog 54511 3dexport
Depth
3ddd
$1
Minotti Albers Depth
...minotti albers depth
3ddd
minotti
minotti albers depth
3d_export
$5
depth chargemk9
...depth chargemk9
3dexport
actual size may vary slightly.
turbosquid
$40
Digital Depth Gauge
...d model digital depth gauge for download as 3ds, max, and obj on turbosquid: 3d models for games, architecture, videos. (1301555)
turbosquid
free
House in the depths of the forest
...e depths of the forest for download as skp, 3ds, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1628048)
3d_ocean
$2
Skull Depth Map 1
...h this texture, using it as a depth map to create a 3d object. no other textures apart from the depth map are included with th...
3d_ocean
$2
Skull Depth Map 4
...th this texture using it as a depth map to create a 3d object. no other textures apart from the depth map are included with th...
3d_ocean
$2
Skull Depth Map 3
...th this texture using it as a depth map to create a 3d object. no other textures apart from the depth map are included with th...
3d_ocean
$2
Skull Depth Map 2
...th this texture using it as a depth map to create a 3d object. no other textures apart from the depth map are included with th...
cg_studio
$30
Variable depth sonar3d model
...cean sea vds rov
.3ds .c4d .obj - variable depth sonar 3d model, royalty free license available, instant download after purchase.
cg_studio
$30
Digital Depth Gauge3d model
...el
cgstudio
.3ds .max .obj .wrl - digital depth gauge 3d model, royalty free license available, instant download after purchase.
Holder
archibase_planet
free
Holder
...holder
archibase planet
holder toilet paper holder
holder paper n070712 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Holder
...e planet
holder rack toilet paper holder
holder toilet roll n240715 - 3d model (*.gsm+*.3ds+*.max) for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
pen holder support prop
pen holder - 3d model for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
pole post holder
сhurch cross pole holder - 3d model for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
holder bathroom ware
shower holder - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Holder
...oilet paper holder
holder paper devon&devon; time black n241113 - 3d model (*.gsm+*.3ds+*.max) for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
holder hanger hanger for towel
holder 7 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
holder hanger hanger for towel
holder 3 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
holder towel rack towel-horse
holder - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Holder
...lder
archibase planet
holder hanger hanger for towel
holder towel n250912 - 3d model (*.gsm+*.3ds) for interior 3d visualization.