Thingiverse
![Bevel Gears by kresty](/previews/8821173.jpg)
Bevel Gears by kresty
by Thingiverse
Last crawled date: 3 years, 1 month ago
I needed some gears, https://youtu.be/Rld1ZAs6YxA shows them running. Seem to fit reasonably well. Included the OpenScad file with settings from GregFrost's thing.
Printed at .2mm layer height, 10% infill (final one I'll do thicker). One axis is designed for a 30mm hex shaft. The other is a 6mm shaft from something like a 37D motor.
The motor gear has a 3mm set screw hole that would need tapped to use.
There are two different sets: 13:43 and 15:37, I'm not sure what gear ratio I'll need for BB-8 :)
The shaft of the little gear printed a tad too small, but I expect you guys to adjust the fittings to fit your project.
These are intended for my Lego BB-8 flywheel drive, we'll see how that goes.
Printed at .2mm layer height, 10% infill (final one I'll do thicker). One axis is designed for a 30mm hex shaft. The other is a 6mm shaft from something like a 37D motor.
The motor gear has a 3mm set screw hole that would need tapped to use.
There are two different sets: 13:43 and 15:37, I'm not sure what gear ratio I'll need for BB-8 :)
The shaft of the little gear printed a tad too small, but I expect you guys to adjust the fittings to fit your project.
These are intended for my Lego BB-8 flywheel drive, we'll see how that goes.
Similar models
thingiverse
free
![120mm display table 6mm motor shaft by nicscin](/t/8549052.jpg)
120mm display table 6mm motor shaft by nicscin
...le and i needed it to work with a larger motor. i'll also be making one that isnt as tall and uses right angle gears to turn.
thingiverse
free
![Gear for 28BYJ-48 stepper motor by makerbard](/t/8639351.jpg)
Gear for 28BYJ-48 stepper motor by makerbard
...ck and pinion gear set example" by dreyfusduke. i altered the gear so that it fits on the shaft of a 28byj-48 stepper motor.
thingiverse
free
![R2-D2 A&A Dome Gear for a Pitman Motor by sgmorton](/t/8891911.jpg)
R2-D2 A&A Dome Gear for a Pitman Motor by sgmorton
...fier gear and i wanted to slip fit it over the shaft.
this works with the pitman motor and the alex kung's awesome dome gear,
thingiverse
free
![3D printed gearbox for coffee grinder by GAFonseca](/t/5048065.jpg)
3D printed gearbox for coffee grinder by GAFonseca
... of an old hand blender and made a new case that is more anatomic and doesn't need screws, since i'll hold it while using
thingiverse
free
![Mounting Hub for 3mm D-shaft motor and 16 tooth LEGO gear (Short Version) by kbuckley](/t/8998038.jpg)
Mounting Hub for 3mm D-shaft motor and 16 tooth LEGO gear (Short Version) by kbuckley
... by the motor after a few hours of driving.
i've also attached the inventor file if you need to change make the hub longer.
thingiverse
free
![12mm hex hub adaptor for DFRobot motor with metal shaft by stuartm](/t/8620815.jpg)
12mm hex hub adaptor for DFRobot motor with metal shaft by stuartm
...han the plastic shaft in the originals so the wheels didn't fit. so i made these adapters which fit a standard 12mm hex hub.
thingiverse
free
![thicker base gear set by curious_pl](/t/9007109.jpg)
thicker base gear set by curious_pl
...oo short you need gear with taller base.
i've remixed ones using nut to dispose heat :http://www.thingiverse.com/thing:5213
thingiverse
free
![Shaft drive for my custom printer. by Redsalamander](/t/8990605.jpg)
Shaft drive for my custom printer. by Redsalamander
...ow i create prints and 3d designs like this check out my youtube channel.https://www.youtube.com/channel/ucshuc93nxgwbacoiddqpu2w
thingiverse
free
![Carduino V2 Pinion with Set Screw by aivasyuk](/t/8164844.jpg)
Carduino V2 Pinion with Set Screw by aivasyuk
...lat spot down to about 1/2 to 2/3 of the length of the exposed shaft, then remove from the vise and carefully remove the plastic.
3dwarehouse
free
![Arduino Step Motor Gear Shaft (Short)](/t/5949383.jpg)
Arduino Step Motor Gear Shaft (Short)
...arduino step motor gear shaft (short)
3dwarehouse
generic gear shaft fit for an arduino stepper motor (short).
Kresty
thingiverse
free
![Ball Cage by kresty](/t/8826830.jpg)
Ball Cage by kresty
...ings, support by checking out my lego droids youtube - particularly if you feel like visiting any of the sponsors (ads) websites!
thingiverse
free
![8mm ID spacer by kresty](/t/9010223.jpg)
8mm ID spacer by kresty
...ng around on youtube.
a boring 8mm inner diameter spacer. this was to keep my 608 bearings away from the thing it was next to.
thingiverse
free
![Seattle Seahawks Earrings (needs studs) by kresty](/t/8947843.jpg)
Seattle Seahawks Earrings (needs studs) by kresty
...tud.
multi-color - printed by changing filament at the appropriate layers. you can also do it once for a simpler color scheme.
thingiverse
free
![Baby Groot Keychain by kresty](/t/8650152.jpg)
Baby Groot Keychain by kresty
...e how the printer did, so i made it smaller.
i've included 3 sizes, plus the version i was scaling before drilling the holes.
thingiverse
free
![My take on a Seahawks Keychain by kresty](/t/8947844.jpg)
My take on a Seahawks Keychain by kresty
...king a tab for the ring, but decided it would work better in the middle of the beak. like the hawk is holding your keys for you.
thingiverse
free
![Small hooks for flat and cylindrical surfaces by kresty](/t/8600298.jpg)
Small hooks for flat and cylindrical surfaces by kresty
...he top & bottom of something that wasn't staying together like it should, and then wrapped a rubber band around the hook.
thingiverse
free
![Blank Die, 6 Sided Dice by kresty](/t/8946457.jpg)
Blank Die, 6 Sided Dice by kresty
...an to draw faces in sketchup, which is easy to trace images or whatever, and then push them in .5mm or so in order to print it...
thingiverse
free
![Savannah Cat Lithophane by kresty](/t/8605990.jpg)
Savannah Cat Lithophane by kresty
...this with, so i feel sort of obligated to put it through it's paces.
if you like my things, check out our lego r2-d2 youtube!
thingiverse
free
![Filament Spool Spacer by kresty](/t/8952792.jpg)
Filament Spool Spacer by kresty
... youtube, and please tweet or facebook a link to his page. he's cool and every visitor helps support my maker habit, thanks!
Bevel
3d_export
$5
![bevel gear](/t/11458858.jpg)
bevel gear
...bevel gear
3dexport
this product is a bevel gear
turbosquid
$5
![Bevel Gear](/t/13352548.jpg)
Bevel Gear
...oyalty free 3d model bevel gear for download as ige and sldpr on turbosquid: 3d models for games, architecture, videos. (1496121)
turbosquid
$18
![Beveled Star](/t/13248124.jpg)
Beveled Star
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
![Bevel Gear](/t/13239518.jpg)
Bevel Gear
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
![helical bevel gear](/t/11891252.jpg)
helical bevel gear
...obile. bevel gears are used as the main mechanism for a hand drill.<br>modeled in solidworks.<br>rendered in keyshot.
3ddd
$1
![BEVELED ARCS 704340ST](/t/623427.jpg)
BEVELED ARCS 704340ST
...beveled arcs 704340st
3ddd
fine art lamps
beveled arcs 704340st
размеры h 66.04cm x w 66.04cm
вес 14 kg.
3d_export
$50
![HELICAL BEVEL GEAR](/t/12680070.jpg)
HELICAL BEVEL GEAR
...lel and perpendicular. in parallel-axis helical gears the two opposite-hand gears provide quiet operation and high load capacity.
turbosquid
$179
![Bevel Gears(1)](/t/13237912.jpg)
Bevel Gears(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$25
![Bevel Gauge 01](/t/13509404.jpg)
Bevel Gauge 01
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
![BEVELED ARCS SCONCE](/t/13508343.jpg)
BEVELED ARCS SCONCE
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Gears
3d_ocean
$4
![Gears](/t/576226.jpg)
Gears
...gears
3docean
gear gears iron
4 different size of gears
3d_export
$5
![gear](/t/11419276.jpg)
gear
...gear
3dexport
gear
3d_export
free
![Gears](/t/12951838.jpg)
Gears
...gears
3dexport
gears
3d_export
$5
![gear](/t/11928510.jpg)
gear
...gear
3dexport
a simple model of gear
3d_export
$5
![gear](/t/11419633.jpg)
gear
...gear
3dexport
gear for transmission , case machine
3d_ocean
$3
![Gears](/t/923572.jpg)
Gears
...nical parts process steampunk vehicle wheel work
10 different gear models volume 01-10 files: .3ds .c4d .obj note: you need vray
3d_ocean
$1
![Spur Gear](/t/586351.jpg)
Spur Gear
...spur gear
3docean
decoration gear
a typical spur gear
3d_ocean
$4
![Gear wheels](/t/860868.jpg)
Gear wheels
...gear wheels 3docean engine engineering gear gears industry machinery mechanical toothwheel wheel pair of gear wheels...
turbosquid
$9
![Gear](/t/13376324.jpg)
Gear
...gear
turbosquid
royalty free 3d model gear for download as on turbosquid: 3d models for games, architecture, videos. (1712328)
turbosquid
$2
![Gears](/t/13238989.jpg)
Gears
...rs
turbosquid
royalty free 3d model gears for download as ma on turbosquid: 3d models for games, architecture, videos. (1166710)