Thingiverse
BetaFPV C01 Micro Cam 20mm stack mount by idontknw4
by Thingiverse
Last crawled date: 4 years, 8 months ago
A mount for the BETAFPV C01 on a 20mm stack. Due to the height this should go on top of the stack
Note: Due to imperfect 3d printing the tolerances on this aren't perfect. The holes are modeled at 2.25mm rather than 2 to allow easier mounting but be aware that this may not haver perfect alignment. If you would like the file with perfect tolerances, download Camholder_perfecttolerance.stl rather than Camholder.stl. However, be aware that it might not fit if 3d printed.
Note: Due to imperfect 3d printing the tolerances on this aren't perfect. The holes are modeled at 2.25mm rather than 2 to allow easier mounting but be aware that this may not haver perfect alignment. If you would like the file with perfect tolerances, download Camholder_perfecttolerance.stl rather than Camholder.stl. However, be aware that it might not fit if 3d printed.