Thingiverse
Berd Air Float Mount by ShadowX
by Thingiverse
Last crawled date: 5 years, 2 months ago
This is a float mount bracket for the Berd Air stock pump to dampen the noise and vibration from the frame.
This is designed to be mounted on top or on bottom of a delta frame. It may be mounted on the side by using an addition elastic in the middle section over the top of the motor. It will keep the motor pressed against the baseplate. Use rubber bands or elastic gaskets to interconnect the outer frame to the motor mount.
I attached the STEP files for anyone who wishes to take the concept and come up with their own designs.
This is designed to be mounted on top or on bottom of a delta frame. It may be mounted on the side by using an addition elastic in the middle section over the top of the motor. It will keep the motor pressed against the baseplate. Use rubber bands or elastic gaskets to interconnect the outer frame to the motor mount.
I attached the STEP files for anyone who wishes to take the concept and come up with their own designs.