Thingiverse
Belt by printschnitzel.at by Printschnitzel
by Thingiverse
Last crawled date: 4 years, 6 months ago
Version 2.2 is out!!!!
thing:3592064
I strongly recommend to not print version 1 or 2 but version 2.2.
It is stronger and easier to print. Version 1 and 2 are not supported any more.
Take a look at my other projects:
Watch
https://www.thingiverse.com/thing:3949624
https://www.thingiverse.com/thing:3949624
LMGTS filament straightener
thing:3732756
filament buffer (airtight & easy to fill) for Prusa MMU2.0
thing:3668570
Spannerhands Filament Box with silica gel and hygrometer
thing:3721856
20.3.2019 ######## Version 2 ##########################################
Beta of version 2 is out! Use the customizer to get your version 2 belt in any length:
Click on the "Open in Customizer" button, choose your length and click "create thing".
Considere to make a small testprint first!
Use 4 perimeters
If you need full access to CAD files you can download them here: https://www.cgtrader.com/3d-print-models/fashion/belts/belt-single-print-mmu-design
Version 2 changes:
-z-hight: 40mm -> 37mm
-more clearance at the hinge pins -> easier to print
-more material at the hinge pins -> hopefully more stable and easier to print
################## Version 1 ##########################################
Seeking for a nice weekend project I stumbled upon this belt:https://www.thingiverse.com/thing:325458
When I saw this I figured wouldn't it be nice to have a belt which comes off the printer fully assembled?
It took more than a weekend but here we are and it works really well! With a better eye for colors and fashion than I have it might even look fancy.
Before you print the whole thing please test your material by printing test_print.stl
I had best results with Prusa PETG. Use 4 perimeters. I wear my first prototype since about beginning of november every day at home without problems (it's orange... you can't wear this bright orange in public :P )Update: it broke today 13.1.2019 :| I need to make this more dureable
The sca-punk color mod does not work because it weakens the hinges. If you know how to do it anyway, please let me know because I want that look :)
Even the design was not inspired by any other design except of the belt by LeFabShop I want to point out that there have been similar designs before concerning the hinges.
This is the first I was able to find. If you know an older one let me know.https://www.thingiverse.com/thing:31243
files:
Belts:
Belt_komplett_900... .stl: 850-950mm
Belt_komplett_805.stl: 755-855mm not testprinted! but should be ok
Belt_komplett_995.stl: 945-1045mm not testprinted! but should be ok
Belt_komplett_1090.stl: 1040-1140mm not testprinted! but should be ok
Take a close look at the print preview of the not testprinted length before you print it. If you find anything suspicious let me know and I fix it.
Everything else:
Schnalle_blank-8.stl: buckle without logo
Schnalle_3DW-8.stl: buckle with 3DW logo
test_print.stl: test print your settings and filament with it
color_mod: files I used to modify color
buckle_blank.stp: Step file, so you can edit the buckle on your CAD system (and e.g. add your logo)
2.2.2019
Added other length
22.12.2018
Added buckle_blank.stp
18.12.2018
Added color modifier file (the one I used for the prints in the pics)
Added test print file
17.12.2018
Added snapp-on buckle, blank and with 3DW logo
Outlook:
-customizable buckle (I have to learn SCAD first though)
In the meantime you can use e.g. meshmixer to get your own logo on.
-customizable lenght (or additional shorter and longer version)
-improve durability (make it 0,4mm thicker to get an extra layer at the front side)
-find answer to: how durable is it? by testing with weights until it snaps
-more color modifyer
-add clearance at hinges
thing:3592064
I strongly recommend to not print version 1 or 2 but version 2.2.
It is stronger and easier to print. Version 1 and 2 are not supported any more.
Take a look at my other projects:
Watch
https://www.thingiverse.com/thing:3949624
https://www.thingiverse.com/thing:3949624
LMGTS filament straightener
thing:3732756
filament buffer (airtight & easy to fill) for Prusa MMU2.0
thing:3668570
Spannerhands Filament Box with silica gel and hygrometer
thing:3721856
20.3.2019 ######## Version 2 ##########################################
Beta of version 2 is out! Use the customizer to get your version 2 belt in any length:
Click on the "Open in Customizer" button, choose your length and click "create thing".
Considere to make a small testprint first!
Use 4 perimeters
If you need full access to CAD files you can download them here: https://www.cgtrader.com/3d-print-models/fashion/belts/belt-single-print-mmu-design
Version 2 changes:
-z-hight: 40mm -> 37mm
-more clearance at the hinge pins -> easier to print
-more material at the hinge pins -> hopefully more stable and easier to print
################## Version 1 ##########################################
Seeking for a nice weekend project I stumbled upon this belt:https://www.thingiverse.com/thing:325458
When I saw this I figured wouldn't it be nice to have a belt which comes off the printer fully assembled?
It took more than a weekend but here we are and it works really well! With a better eye for colors and fashion than I have it might even look fancy.
Before you print the whole thing please test your material by printing test_print.stl
I had best results with Prusa PETG. Use 4 perimeters. I wear my first prototype since about beginning of november every day at home without problems (it's orange... you can't wear this bright orange in public :P )Update: it broke today 13.1.2019 :| I need to make this more dureable
The sca-punk color mod does not work because it weakens the hinges. If you know how to do it anyway, please let me know because I want that look :)
Even the design was not inspired by any other design except of the belt by LeFabShop I want to point out that there have been similar designs before concerning the hinges.
This is the first I was able to find. If you know an older one let me know.https://www.thingiverse.com/thing:31243
files:
Belts:
Belt_komplett_900... .stl: 850-950mm
Belt_komplett_805.stl: 755-855mm not testprinted! but should be ok
Belt_komplett_995.stl: 945-1045mm not testprinted! but should be ok
Belt_komplett_1090.stl: 1040-1140mm not testprinted! but should be ok
Take a close look at the print preview of the not testprinted length before you print it. If you find anything suspicious let me know and I fix it.
Everything else:
Schnalle_blank-8.stl: buckle without logo
Schnalle_3DW-8.stl: buckle with 3DW logo
test_print.stl: test print your settings and filament with it
color_mod: files I used to modify color
buckle_blank.stp: Step file, so you can edit the buckle on your CAD system (and e.g. add your logo)
2.2.2019
Added other length
22.12.2018
Added buckle_blank.stp
18.12.2018
Added color modifier file (the one I used for the prints in the pics)
Added test print file
17.12.2018
Added snapp-on buckle, blank and with 3DW logo
Outlook:
-customizable buckle (I have to learn SCAD first though)
In the meantime you can use e.g. meshmixer to get your own logo on.
-customizable lenght (or additional shorter and longer version)
-improve durability (make it 0,4mm thicker to get an extra layer at the front side)
-find answer to: how durable is it? by testing with weights until it snaps
-more color modifyer
-add clearance at hinges