Cults
Belt and Project Buckles
by Cults
Last crawled date: 6 years, 2 months ago
These look and function like common side release buckles but are designed for 3D printing (without supports). The original Nexus fast release design has a number of edges that require support and thus extra work for the 3D printer :>(.
Great for any 3D projects requiring a belt. Four sizes are included: ½ inch, 5/8 inch, ¾ inch and one inch. The female end has extra loops for a more permanent lock on the belt material whereas the male end is quickly adjustable. Works well with nylon or elastic webbing.
Great for any 3D projects requiring a belt. Four sizes are included: ½ inch, 5/8 inch, ¾ inch and one inch. The female end has extra loops for a more permanent lock on the belt material whereas the male end is quickly adjustable. Works well with nylon or elastic webbing.
Similar models
cults
free
1000-year-old Viking belt buckle
...hich a 1000-year-old viking belt buckle was laser scanned and 3d printed to achieve a copy of the unique archaeological artifact.
cults
free
Space Princess - Belt Buckle
...rious/ninjaflex-pouch).
full diy instructions at http://dragonmountaindesign.com/2017/04/24/project-space-princess-utility-belt/
cults
$7
Buckle up
...le
it is a buckle for your belt. it is a 3d model for 3d printing. download this 3d file and make it with your 3d printer. enjoy!
cults
free
LED Buckle
...h? share your project and let us know by using hashtag ledbuckle and subscribe for more wearable electric projects from adafruit.
cults
$3
Baterrang
...baterrang
cults
batman baterrang utility belt
batman baterrang, 6" long and 0.25" thick. no support material required.
cults
free
Kinect v2 Support
...e support is stable.
it will be enough at the end to put a screw between the support and the planned location on the kinect.
cults
free
The Simpsons house
...identified by a tab added to the support to facilitate removal.
minimum bed size 20x20x10, and maximum nozzle diameter is 0.4mm
cults
free
(AIRSOFT) 12G BELT FED LINKS
...t fed links
cults
this is part of the belt fed co2 shotgun im working on, don't forget to try out my other designs enjoy ;)
cults
$2
Labyrinth Game
...ve is to roll the ball through the labyrinth from one end to the other avoiding the holes. path works well in either direction.
cults
free
Mount Parts for 8 & 10 inch Pad
...open-e-drums.tumblr.com/
test movie
https://www.youtube.com/watch?v=6k6vkdfpsu8
i have not tested the parts for 10 inches yet.
Buckle
cults
$7
Buckle up
...le
it is a buckle for your belt. it is a 3d model for 3d printing. download this 3d file and make it with your 3d printer. enjoy!
cults
free
SCARA SCARF BUCKLE
...ra scarf buckle
cults
scara scarf buckle collection – simple and easy-to-use scarf buckle – a great accessory for your wardrobe.
cults
$1
Buckle for backpack straps
...buckle for backpack straps
cults
loop bag back sling
buckle for backpack strap in 2 part pockets
cults
free
Zortrax Buckle
...zortrax buckle
cults
imprimé sur une imprimante 3d zortrax m200.
cults
free
LED Buckle
...h? share your project and let us know by using hashtag ledbuckle and subscribe for more wearable electric projects from adafruit.
cults
free
1000-year-old Viking belt buckle
...hich a 1000-year-old viking belt buckle was laser scanned and 3d printed to achieve a copy of the unique archaeological artifact.
cults
free
Space Princess - Belt Buckle
...rious/ninjaflex-pouch).
full diy instructions at http://dragonmountaindesign.com/2017/04/24/project-space-princess-utility-belt/
cults
free
Buckle for Garmin 220 watch bracelet
...nd requires a finer setting.
you can also find the bracelet (long section only) here:
https://cults3d.com/en/users/julien_dacosta
cults
$1
Sun earring and pendant
...jewelry necklace pendant diamond fashion gold beauty woman treasure buckle ear earring and pendant in the form of...
Buckles
cults
$7
Buckle up
...le
it is a buckle for your belt. it is a 3d model for 3d printing. download this 3d file and make it with your 3d printer. enjoy!
cults
free
SCARA SCARF BUCKLE
...ra scarf buckle
cults
scara scarf buckle collection – simple and easy-to-use scarf buckle – a great accessory for your wardrobe.
cults
$1
Buckle for backpack straps
...buckle for backpack straps
cults
loop bag back sling
buckle for backpack strap in 2 part pockets
cults
free
Zortrax Buckle
...zortrax buckle
cults
imprimé sur une imprimante 3d zortrax m200.
cults
free
LED Buckle
...h? share your project and let us know by using hashtag ledbuckle and subscribe for more wearable electric projects from adafruit.
cults
free
1000-year-old Viking belt buckle
...hich a 1000-year-old viking belt buckle was laser scanned and 3d printed to achieve a copy of the unique archaeological artifact.
cults
free
Space Princess - Belt Buckle
...rious/ninjaflex-pouch).
full diy instructions at http://dragonmountaindesign.com/2017/04/24/project-space-princess-utility-belt/
cults
free
Buckle for Garmin 220 watch bracelet
...buckle for garmin 220 watch bracelet cults a buckles for the garmin forerunner 220. to be printed with...
cults
$1
Sun earring and pendant
...ndant
cults
jewelry necklace pendant diamond fashion gold beauty woman treasure buckle ear
earring and pendant in the form of sun
Hobby
cults
free
Easy removable top plate for microquad with room for Horizon Hobby micro FPV camera
...ubber band all around the frame and battery to keep it in place.
update 10-10-2016: added repaired version (credits to loswave)
cults
free
10 Degree FPV Camera Mount
...10 degree fpv camera mount cults fpv hobby quadcopter this fits the hobby king quanum complete fpv...
cults
$2
Dragon keychain
...dragon keychain cults dragon keychain toy hobby 3d print dragon...
cults
$1
necklace
...necklace cults necklace 3d model industrial design educational hobby design 3d printing printing art necklace 3d model for...
cults
$1
tennis raclette
...raclette tennis sport tool design 3d printing printing educational hobby tennis raclette 3d model for...
cults
$6
Low Poly Chess Set
...cults low poly chess set board game geometric sport hobby faceted low poly chess set quick and easy to...
cults
$1
spark plug
...design 3d model printing 3d printing art educational lowpoly hobby engine car spark plug 3d model...
cults
$8
Futuristic aircraft DIY 3d model
...aircraft diy 3d model cults diy aircraft fly create hobby 3d model car airplane futuristic aircraft diy 3d model...
cults
free
Cartridge Switch © Nintendo
...rip
switch © nintendo cartridge holder
ideal for traveling on a trip.
2 compartments. with lid.
contains 8 to 10 game cartridges.
cults
free
Nano rock crawler kit for Yokomo NanoQlo
...other truck body with special mounting on the frame. http://www.supermotoxl.com/real-object-design-for-hobbymodels/real-object-design-for-hobby-models/xl- for more details and instruction can be found at...
Fastener
cults
$1
Gopro fastener
...gopro fastener
cults
gopro attached
attached to the original ribs
cults
free
Fasteners IKEA
...fasteners ikea
cults
plinths ikea
small clips for attaching ikea kitchens
cults
free
Fastening clip
...tion beams
production of a staple for fixing the vehicle beams
in abs with foot fixing hole diameter 6 mm or without fixing foot.
cults
free
replacement fastening for bed slats
...r bed slats
cults
bedroom bed bed slats
prints a fixture for bed slats,
if one of these broke.
formats: solidworks and stl
cults
$5
Lego - Plane - Airplane - With fastener - Duplo
...eel: 2x
little reminder:
for lego of standard size the scale is to be set at 50% (so the parameters are divisible by 2)
cults
$1
Cage with doudou
...irst version)
v1: square corners and fixing screws
v2: square corners and fastening nails
v3: rounded corners and fastening nails
cults
free
Power Strip Mount (pegboard, desk or wall mounted)
...ccessfully tested with 5 different power strips, of which 3 can be seen in the picture.
designed to be printed without support.
cults
free
Logo batman key holder
...or batarang for keyring. 2 versions one with central fastener and the other in the wing. batman logo or...
cults
$3
Support FC-Z on chassis 3D printer
...ter frame fc-z
fixing the z limit switch for z0 determination.
fastening by clamping the chassis (tightening with two setscrews).
cults
$1
Paw Patrol Badges
...please use all precautions necessary with children when using fastener. ...
Clothing
cults
$1
Wall clothes hangers - Bunny
...wall clothes hangers - bunny
cults
bunny home clothes hanger wall rabit
wall clothes hangers - bunny
cults
$1
Giraffe - wall clothes hanger
...giraffe - wall clothes hanger
cults
giraf giraffe wall clothes hanger jacket
giraffe - wall clothes hanger
cults
free
Clothes pin vintage
...site with the code cultsfutura.
otherwise, you can vary colors to give a vintage effect to your clothes when they're drying.
cults
free
Cloth Hanger Clips
...e less than a minute so you can make lots of them in different colors.
print in spiral vase mode with no top and bottom infill.
cults
free
Suit Up! Clothes Hanger
...
3d printed clothes hanger for your wardrobe, with the "suit up!" catchphrase from the tv show, how i met your mother.
cults
free
Replacement foot for clothes dryer
...foot for clothes dryer
cults
drying rack washing foot
this foot fits on clothes racks equipped with curved tubes of diameter 14mm
cults
free
Support Hooks Clothes rack
...k
cults
washing support drying rack
this support allows the replacement of clothes rack parts that break with exposure to the sun
cults
free
Baby Cloth Holder
...baby cloth holder
cults
turn supports on. unless you mastered your bridges.
cults
$1
Box Clothes peg
...box clamp a linen.stl to use with software support
- box clamp with linen -support.stl, the media can be integrated into the file
cults
free
Clothes hanger
... download this 3d printer file and make it with 3d printing. let’s enjoy!
this 3d model was originally shared on poly by google.
Belts
cults
free
Belt
...belt
cults
belt
belt
cults
free
Strap belt
...strap belt
cults
strap belt
strap belt
cults
free
Belt Case
...
printed in pet-g
inside dimensions are: x= 56mm y= 26mm z= 58mm.
the pin for the hinge is made of a paper clip (thinness = 1mm)
cults
free
Belt strap
...cults blocked belt blocking accessories dagoma to lock the belts to print in vertical slowly, hole provided for screw...
cults
free
Seat belt plug
...seat belt plug
cults
seat belt plug
the simple seat belt plug with my name: giovanni.
cults
free
Balancing Belt Holder
...ch with both sides hanging down and the pointed end is placed on your fingertip. i saw this over 30 years ago in woodshop class!
cults
free
belt idler pulley
...lley with teeths, it is possible to look at it here. that there was couple.
https://cults3d.com/en/3d-model/tool/idler_pulley_2gt
cults
free
Belt tensioner
... printed in abs
you can find all other free design on https://www.genapart.com/accueil/ressources/
https://youtu.be/d3nzc0ww5q8
cults
free
Space Princess - Belt Buckle
...rious/ninjaflex-pouch).
full diy instructions at http://dragonmountaindesign.com/2017/04/24/project-space-princess-utility-belt/
cults
$1
Belt Idler pulley GT2
...aring f605zz
smooth pulley in couple to it, it is possible to take here.
https://cults3d.com/en/3d-model/gadget/belt-idler-pulley
Belt
cults
free
Belt
...belt
cults
belt
belt
cults
free
Strap belt
...strap belt
cults
strap belt
strap belt
cults
free
Belt Case
...
printed in pet-g
inside dimensions are: x= 56mm y= 26mm z= 58mm.
the pin for the hinge is made of a paper clip (thinness = 1mm)
cults
free
Belt strap
...elts, to print in vertical slowly, hole provided for screw 3 mm flat head but milled ok, think little to be tapping the piercing.
cults
free
Seat belt plug
...seat belt plug
cults
seat belt plug
the simple seat belt plug with my name: giovanni.
cults
free
Balancing Belt Holder
...ch with both sides hanging down and the pointed end is placed on your fingertip. i saw this over 30 years ago in woodshop class!
cults
free
belt idler pulley
...lley with teeths, it is possible to look at it here. that there was couple.
https://cults3d.com/en/3d-model/tool/idler_pulley_2gt
cults
free
Belt tensioner
... printed in abs
you can find all other free design on https://www.genapart.com/accueil/ressources/
https://youtu.be/d3nzc0ww5q8
cults
free
Space Princess - Belt Buckle
...rious/ninjaflex-pouch).
full diy instructions at http://dragonmountaindesign.com/2017/04/24/project-space-princess-utility-belt/
cults
$1
Belt Idler pulley GT2
...aring f605zz
smooth pulley in couple to it, it is possible to take here.
https://cults3d.com/en/3d-model/gadget/belt-idler-pulley
Project
cults
$4
Bench for architectural project
...bench for architectural project
cults
bench for architectural project
bench for architectural project
cults
free
Handle for Tango Project
...handle for tango project
cults
handle for tango project
handle for tango project
cults
free
Automatic Bubble Turret Project
...automatic bubble turret project
cults
automatic bubble turret project
automatic bubble turret project
cults
free
zZcube Keychain (Second Project)
...zzcube keychain (second project)
cults
zzcube keychain (second project)
zzcube keychain (second project)
cults
free
Funnel Flow Science / Math Project
...funnel flow science / math project
cults
funnel flow science / math project
funnel flow science / math project
cults
free
Rubber Band Based Pistol Project
...rubber band based pistol project
cults
rubber band based pistol project
rubber band based pistol project
cults
free
Cookie cutters - Tear drop and Flower (First Project)
...(first project)
cults
cookie cutters - tear drop and flower (first project)
cookie cutters - tear drop and flower (first project)
cults
free
ROBOTOY PROJECT #1 - Head 01
...robotoy project #1 - head 01
cults
premier modèle de tête pour le robotoy.
cults
$2
Robotoy Project #1 - Antenne Wifi
...du #fablab en gestation de saint-brieuc. wip (work in progress). première ébauche dévoilée au premier #makerfair de paris #mfp14