Thingiverse
Behringer Model D synthesizer synth desktop stand by cjdavies
by Thingiverse
Last crawled date: 4 years, 2 months ago
A basic stand for the Model D which allows cables coming out the back of a Keystep to pass underneath. The stand also angles the unit forward 30°.
Assembles using a length of 20mm aluminium box section (I didn't have any threaded bolt like the other designs I've seen use). Finish with some rubber feet on top & bottom.
You may need to experiment with scaling to get a nice fit for the aluminium. It should require a decent amount of force with the printed part flat against a hard surface (workbench, hard floor) & won't come undone unless you really pull on it. Slightly round off the sharp corners of the aluminium with a file to ease insertion.
Assembles using a length of 20mm aluminium box section (I didn't have any threaded bolt like the other designs I've seen use). Finish with some rubber feet on top & bottom.
You may need to experiment with scaling to get a nice fit for the aluminium. It should require a decent amount of force with the printed part flat against a hard surface (workbench, hard floor) & won't come undone unless you really pull on it. Slightly round off the sharp corners of the aluminium with a file to ease insertion.