Thingiverse
Bed sheet fastener
by Thingiverse
Last crawled date: 5 years, 12 months ago
Print as you wish, but recomended is in ABS and full infill.
You will need minimum od 4 sets, meaning:
4x Socket
4x Slider
4x Nut
4x M4x16mm ISO 7380 screws with appropriate CAP/Dome nuts
12x 4mm x (length dependent of the thickness of the bed side plate) Wood screws
(maybe some additional washers if you use sinkhole screws)
OR
4mm self drilling screws (also watch the thickness od the bed side plate for length)
To prepare the Bed sheet use Grommet Kit like these:
https://www.amazon.co.uk/s?k=Grommet+Kit&ref=nb_sb_noss
fasten the Grommets on on the sheet to match the position of the sockets.
For the perfect fixing of the sheet print additional 2 sets and fix them like in in the pictures.
Mount the socket on the inner side of the bed frame as shown in the pictures!!!
im not responsible if you destroy your BED or BEDSHEETS, DIY at your own RISK!!!
:D
You will need minimum od 4 sets, meaning:
4x Socket
4x Slider
4x Nut
4x M4x16mm ISO 7380 screws with appropriate CAP/Dome nuts
12x 4mm x (length dependent of the thickness of the bed side plate) Wood screws
(maybe some additional washers if you use sinkhole screws)
OR
4mm self drilling screws (also watch the thickness od the bed side plate for length)
To prepare the Bed sheet use Grommet Kit like these:
https://www.amazon.co.uk/s?k=Grommet+Kit&ref=nb_sb_noss
fasten the Grommets on on the sheet to match the position of the sockets.
For the perfect fixing of the sheet print additional 2 sets and fix them like in in the pictures.
Mount the socket on the inner side of the bed frame as shown in the pictures!!!
im not responsible if you destroy your BED or BEDSHEETS, DIY at your own RISK!!!
:D