Thingiverse
Bed glass levelling height calibration test - fast frame by JonBAL
by Thingiverse
Last crawled date: 4 years, 3 months ago
Frame size - 160x160mm, for bed 200x200mm (Prusa i3, Wanhao Duplicator i3).
The line width of the frame - 1 mm.
My Settings (Simplify 3D):
Nozzle - 0.4mm
Extrusion width - Auto/0.48mm
Primary layer height - 0.2mm
First layer height - 50% (0.1mm)
First layer width - 100%
No Raft
No Brim
Line wigth (1mm) include two line extrusion (0.48mm). When you print, the both lines must be glued together (one broad line without gap).
The line width of the frame - 1 mm.
My Settings (Simplify 3D):
Nozzle - 0.4mm
Extrusion width - Auto/0.48mm
Primary layer height - 0.2mm
First layer height - 50% (0.1mm)
First layer width - 100%
No Raft
No Brim
Line wigth (1mm) include two line extrusion (0.48mm). When you print, the both lines must be glued together (one broad line without gap).