Thingiverse
Beat Saber Darth Maul Katana Remix by seawitch4
by Thingiverse
Last crawled date: 4 years, 3 months ago
Elongated Handles, trimmed controller-holders and resized to fit Hyperkin GelShell skins.
Darth Maul style dual-saber wielding in Beat Saber
Controller ends are "pinned" with bits of bamboo for security. I used bamboo skewers (what I had on-hand) and they worked perfectly for both security pins and controller pins after a little trimming/shaving. Controller Pins are unmodified from original and can be picked up there.
UPDATE:
If you're going to use pins then print at 100% infill, or do something to increase strength at the joint. I've decided to glue it all together for stability.
UPDATE 07/09/18:
Printed at 100% this Thing is sturdy, but heavy. I've also opted for gluing the ends, as there is a good deal of force exerted on those joints.
Darth Maul style dual-saber wielding in Beat Saber
Controller ends are "pinned" with bits of bamboo for security. I used bamboo skewers (what I had on-hand) and they worked perfectly for both security pins and controller pins after a little trimming/shaving. Controller Pins are unmodified from original and can be picked up there.
UPDATE:
If you're going to use pins then print at 100% infill, or do something to increase strength at the joint. I've decided to glue it all together for stability.
UPDATE 07/09/18:
Printed at 100% this Thing is sturdy, but heavy. I've also opted for gluing the ends, as there is a good deal of force exerted on those joints.