Thingiverse
Bearingless Kossel Carraige by mattshane
by Thingiverse
Last crawled date: 3 years, 1 month ago
Didn't feel like spending money on linear bearings so I thought I would give this a try. They work pretty awesome.
These are being used with OPENBEAM extrusions so you might not have too much success with other brands.
Change #define DELTA_CARRIAGE_OFFSET to 18 and use the new top pieces if you only want to use one idler bearing on the belt. You can keep stock top piece if you use multiple idler bearings but you will get some binding at extreme height.
https://youtu.be/SZKkPdt6040
EDIT: I soaked them in vegetable oil for a little bit after printing and they run really smooth.
Should have stated originally this is for 1515.
These are being used with OPENBEAM extrusions so you might not have too much success with other brands.
Change #define DELTA_CARRIAGE_OFFSET to 18 and use the new top pieces if you only want to use one idler bearing on the belt. You can keep stock top piece if you use multiple idler bearings but you will get some binding at extreme height.
https://youtu.be/SZKkPdt6040
EDIT: I soaked them in vegetable oil for a little bit after printing and they run really smooth.
Should have stated originally this is for 1515.
Similar models
thingiverse
free
Direct Drive Extruder for E3D Idler with upper support Modification by darude
...he bearing holder, it breaking off, so i reworked the idler: added top support part.
to assemble this part you also need 5mm bolt
thingiverse
free
OB 1.4 Y idler by quicktony
...he back of the idler to allow the belt to wrap directly around. this clips in so no need to disassemble the printer to use this.
thingiverse
free
GT2 Guide For 625 bearing - two-piece by leodabague
...rating. so this a two-piece belt guide for your bearing.
simply print it at your standart settings and try it out on your reprap.
thingiverse
free
Lazy Susan bearing set by lgshort
... my bearings.
once again:
mount top piece to lazy susan.
mount bottom piece to base.
add bearings (5.0mm)
snap together, forever.
thingiverse
free
belt tensioner for rostock max by barnett
...and making it perfectly level. others have machined solutions similar to this, or used mirror clamps. i wanted to...
thingiverse
free
Belt Idler Pulley and Holder for X and Y Axis by BSkorn
...he idler pulley been changed from 50 to 70 degrees.
the most recent cad files are labled with rev1.0 in the end of the part name.
thingiverse
free
Self centering idler bearing for Y-axis belt. by Peter_I
... make a "crowned bearing" to use as an idler.
you have to be careful, but once it us done right, it works like a charm.
thingiverse
free
608 Bearing Idler - Adafruit Heatset Insert Press by wcarver1
...seful and you'd like to contribute to the development of future things, you can buy me a coffee at https://ko-fi.com/wcarver1
thingiverse
free
Y-Axis GT2 Idler by sdpaterson
... (24 mm) to secure the idler mount and gt2 together. the nut and bolt head are recessed a few mm to ensure a good solid fitting..
thingiverse
free
Idler belt pulley (easy print with seam optimization) by Mach0gr
...th with no bearings : 10mm
outside pulley with bearings installed : ~ 11.5mm
hope to save you some time and money in your project
Mattshane
thingiverse
free
Echo Dot Wall Mount by mattshane
...hane
thingiverse
updated
thinner walls and about 1mm taller so echo fits flush.
added .stp file.
simple wall mount for echo dot.
thingiverse
free
Toy Rocket by mattshane
...ere is a version woth his name to demonstrate where the name can go. there is also a blank version.
https://youtu.be/yigll-ypuwe
thingiverse
free
350mm QUAD by mattshane
... out.
https://youtu.be/yrjfowtwuaa
added a new top plate we did last we to accommodate a non-3dr gps and some extra room inside.
thingiverse
free
Geeetech Prusa I3 X Extruder Bracket by ant0ny
...remix of itty bitty belted extruder by clough42 by mattshane to take a nema17 motor here http://www.thingiverse.com/thing:1030212 parts: 2x...
thingiverse
free
Mount for Ridgid Router Model # R24012 for Mostly Printed CNC by mattshane
...uter. requires 2 brackets
update: added a mount for dremel 3000.
this is for the original http://www.thingiverse.com/thing:724999
thingiverse
free
DJI/Clone Leg Extensions by mattshane
...ne
thingiverse
some simple legs that fit really well on stock or clone dji arms from 450 or 550. needed them to clear my gimbal.
thingiverse
free
Remix of Clough42 Itty Bitty Extruder. by mattshane
...instead of a nema 14. it uses clough42 200mm gt2 loop belt avaiable at their website. http://clough42.com/product/200mm-gt2-belt/
thingiverse
free
MIni Baby Rattle by mattshane
...mini baby rattle by mattshane
thingiverse
baby rattle filled with rice, while printing, for my son.
thingiverse
free
DJI F550 Landing Gear Mount for 16mm Carbon Fiber Tube by mattshane
... carbon fiber tube by mattshane
thingiverse
simple but strong mount for using 16mm landing gear with dji f550 hex. not for f450.
Bearingless
3d_export
$15
Bell AH-1Z Viper
...the h-1 upgrade program. the ah-1z features a four-blade, bearingless composite main rotor system, uprated transmission, and a new...
thingiverse
free
Screw & bearingless adjustable spoolholder by raf_ds
...ueeze it into the other side so you have a teflon "rod". adjust the slider to the required size and start printing :-).
thingiverse
free
Filament straightener bearingless by Hitchabout
...dy in play 4mm od ptfe tube throughout instead of bearings.or without a tube.
if it needs to be modifiedhttps://a360.co/2e3jpjy
thingiverse
free
bearingless x&z-axis prusa i3 (non-wobble fix version) by shawdreamer
... second design for the motor end of the x-axis so the motor can be used facing backwards or forwards depending on the users setup
thingiverse
free
bearringless spinner by jojost3
...bearringless spinner by jojost3 thingiverse it's a bearingless ...
thingiverse
free
bearingless x & z axis Prusa i3 by shawdreamer
...e-extruder-aluminum-thermal-core-reprap-mendel-3d-pri/151940238781?sspagename=strk%3amebidx%3ait&_trksid=p2057872.m2749.l2649
thingiverse
free
PolTur XL v.2 (The lack table printer) by shawdreamer
...be found on thingiverse) i am including my own "bearinglessquot; designs for both the x-carriage and z-axis as these...
thingiverse
free
Bearingless Fidget Spinner by CaseyJohnson
...extra mass. printed in protopasta carbon fiber filament, and it turned out very well.
https://www.youtube.com/watch?v=2cwy0jttvms
thingiverse
free
Bearingless Fidget Spinner Remix by LuisDUgena
...erse
warning!!!! this is not working!!!
i wasn't able to print the original bearingless fidget spinner so i've remix it.
thingiverse
free
Poltur XL upgrade parts by shawdreamer
.../ improvements / modifications 300x200 heated printbed - https://www.thingiverse.com/thing:2152660 bearingless carriage - https://www.thingiverse.com/thing:2516300 ramps 1.4 enclosure and screen mount...
Carraige
thingiverse
free
FLsun QQ,QQ-s Rail carraige RESIZED by Masterjeff
...carraige resized by masterjeff
thingiverse
just my design of a insta360 go camera mount for the diatone tinawhoop. super simple.
thingiverse
free
Voron Afterburner mount with Bltouch adapter for Ender 3 by lessananon1
...is for now. original summary: this is simply the x-carraige adapter, and bltouch mount, to put a voron afterburner...
thingiverse
free
Drop in Replacement for MK3/MK3S for a Titan Extruder and a mount for a Sensor by esolares
...an exact match to the screw holes on the x-carraige ...
thingiverse
free
Y carriage belt holder for MGN12 mod w/ i3 Y carriage by TheThiefMaster
...w/ i3 y carriage by thethiefmaster thingiverse "prusa i3 y-carraige belt holder v3" by endlesshunt modified for the reduced...
thingiverse
free
Zonestar P802QR2 X Axis Extruder Mounts by BoothyBoothy
...disclaimer: mounting the extruder assemblies to the x axis carraige will add additional weight to the x axis. this...
thingiverse
free
ReP_AL Core XY 3D Printer Small by ReP_AL
...the same parts except for the z axis bed carraige which is shorter. this design takes a heat bed...
thingiverse
free
MS-Delta Effector V2 by Spaceman9105
...mounted with m3 screws to the effector and the carraige i used this to print my upgrade parts for...
thingiverse
free
Myford Carriage Lock
...myford carriage lock thingiverse hello, here is my carraige lock for a myford ml7(could be used with the...
thingiverse
free
Hemera Mount Bracket for Modern Lulzbot Carraige (Pro, Workhorse, Mini 2)
...back plate, inspired by the one that e3d provided (4008893).
feel free to use; use at your own risk; not for commercial purposes.
thingiverse
free
Jubilee Toolchanger on Hypercube EVO (HEVO)
...https://www.thingiverse.com/thing:2437440 the bolt holes are adjusted for the hevo carraige bolt spacing (20mm i think?) bolt holes are countersunk...
Kossel
thingiverse
free
Delta Corner Braces by 3dmpro
...thingiverse inspired by the frame extension of the anycubic kossel linear, i developed an easy to print corner brace....
thingiverse
free
Promega Z Roller Carriage by TheBum
...x 11mm x 6.35mm regular spacers three (3) mini kossel 5mm x 21.5mm x 7mm wheels m6 x 12mm...
thingiverse
free
Kossel Mini FSR Bed Upgrade (MicroMake D1) by Lucidwolf
...dware savvy type. adding up cost of fsr sensors, time to solder, and nano the ~30 bucks plus shipping is a good deal for a kit.
thingiverse
free
Kossel Frame Extenders by 3dmpro
...board. in my case, i developed a simple rack that puts the board within range of all but one end-stop, which was simple to tweak.
thingiverse
free
Anycubic Kossel Spool Rod by GeneKoh
...bs against the tensioning knobs, so lengthened it another 25mm and this let me shift the spool towards the centre of the frame...
thingiverse
free
FLSUN Kossel Delta Effector Sets by BeyondPrint
...ad hotend
link here: https://rb.gy/inq8w9
3d filament 1.75mm color: red--->used in this print build<---https://rb.gy/0syrgd
thingiverse
free
Kossel Z Axis Stabilizer & Bed Mount by DigitalSynergy
...finds this as useful as i did.
my print bed is 220mm round, but it should work for any size of kossel that uses 2020 extrusions.
thingiverse
free
Anycubic Kossel ADXL345 Effector Mount by Qwuille
...ogo down, the cable holder can be printed however you deem right.
the cable canal is alittle small, but could not make it bigger.
thingiverse
free
Better carriage with belt tensioner by PixelPicker
...better version of "carriage with belt tensioner for anycubic kossel plus" by alezsx. what i've done: as you can...
thingiverse
free
Anycubic Kossel Linear Plus flex3drive flexible bowden remote motor Effector upgrade E3D V6 (Volcano too) and 5015 blower by rosch8
...s still under the test
you need to set 2800 steps per mm for the first iteration and then make calibration of extruder for sure.