Thingiverse
Bearing jump rope by Martznip
by Thingiverse
Last crawled date: 4 years, 7 months ago
Trying to make myself a speed jump rope on my free time, I ended up with that.
I dont have so much images as I broke the 2 handles in my training bag wich fell from a good height... and I don't have the courage to print it one more time...
Designed to fit a 608 bearing with a M6 hex screw with its nut (refer to the photos)
You can use a steel cable up to ∅3mm and get it through the screw by drilling it and then locking it by tightening the nut . Or add a ring to connect the cable for more mobility and variety of cable.
I added the nuts cover for more grip, remixed from : https://www.thingiverse.com/thing:4558217
This design is perfectible, so feel free to modify it !
I dont have so much images as I broke the 2 handles in my training bag wich fell from a good height... and I don't have the courage to print it one more time...
Designed to fit a 608 bearing with a M6 hex screw with its nut (refer to the photos)
You can use a steel cable up to ∅3mm and get it through the screw by drilling it and then locking it by tightening the nut . Or add a ring to connect the cable for more mobility and variety of cable.
I added the nuts cover for more grip, remixed from : https://www.thingiverse.com/thing:4558217
This design is perfectible, so feel free to modify it !