Thingiverse
Bear Exxa Z Axis Endstop Fixated with Fine Adustment Screw by JBieri
by Thingiverse
Last crawled date: 3 years, 4 months ago
If you're upgrading to Bear Exxa, but don't have a Prusa i3 MK3S or a control board that can be used without endstops; you will need to rig up physical endstops, which the Bear Exxa currently lacks. I remixed the original design, by carefully merging it into the design of the Bear X-Axis motor mount.
I upgraded my P802M to Bear Exxa (the original Z endstop is terrible to adjust/tighten). This provides a fixated endstop with a fine adjustment screw to ease setting Z axis height. I used the endstop itself a pattern to drill the mounting holes (few different types out there); mid line is best as mine came out a bit higher than I would like in terms of adjustment (see photo).
I upgraded my P802M to Bear Exxa (the original Z endstop is terrible to adjust/tighten). This provides a fixated endstop with a fine adjustment screw to ease setting Z axis height. I used the endstop itself a pattern to drill the mounting holes (few different types out there); mid line is best as mine came out a bit higher than I would like in terms of adjustment (see photo).
Similar models
thingiverse
free
George164' Ultimaker original adjustable z-endstop by George164
...nly.
i continue upgrade of my old printer.
adjusting screw is m4. fixing screw are m3.
a simple and well-working z-axis endstop.
thingiverse
free
Adjustable Z Endstop for Folgertech Prusa i3 2020 X-Axis Upgrade by pizzachef
...in some supports in the rail opening to help out the bridging.
fairly simple addition, everything else is sonnylowe's design.
thingiverse
free
TEVO Tarantula adjustable Z endstop mount by Kraemi
...6x m4 v-slot nut
6x m4 washers
normal endstop plate:
2x aditional m4x10mm screws
short endstop plate:
2x m4x16mm screws
have fun!
thingiverse
free
X-endstop after X and Z-axis MGN12H upgrade by siegfriedestrada
...using the single extruder stock carriage. so i decided to design one using sketchup. installed and working fine on my unit. :)
thingiverse
free
FLsun Cube Endstop Mounts for Linear Rails Upgrade by formateins
...ndstop just mirror it in your slicer. you have to use the square t-nuts provided with the printer - regular t-nuts won't fit.
thingiverse
free
Adjustable Z Endstop by bruckj
...op for the x-axis so i have included a bracket for mounting the switch to the rod.
2016-01-23 update: cleaned up sketchup file.
thingiverse
free
Parametric Z endstop mount and arm for Prusa i3 rework by Mythobeast
...allow the arm to be adjustable roughly 10mm on any axis so that it can precisely touch down on whatever model of endstop you use.
thingiverse
free
Z Axis Endstop with fine adjustement rod clamp and microswitch holder by PulseNeko
...reprap. those using other printer variants can still utilize the screw adjustment tool paired with your existing endstop holders.
thingiverse
free
Adjustable Z Axis Endstop by PDMarc
...home z axis.
design
i have uploaded the freecad design that i made, so you can remix it even more.
i hope it is useful for you!
thingiverse
free
Z-axis Lower Motor Mount Support with Integral Z-axis Endstop by pefozzy
...z-axis endstop by pefozzy
thingiverse
remixed lower z-axis motor mount support that includes the z-axis endstop adjustment screw
Exxa
thingiverse
free
Bear Exxa - Bolted Belt Tensioner by M_88
...axis belt tensioner because i wanted a bolted connection that feels more secure instead of cutting a screw and leave it hanging..
thingiverse
free
Nozzle Cam for Prusa MK3s / Bear Exxa by Photogad
... to more securely hold the endoscope camera without making the other wires stick out too far and bump into the frame when homing.
thingiverse
free
Bear (V1.0) Orbiter (V1.5) Extruder mount by St0fzuiger
...st0fzuiger thingiverse this is a modification of the bear exxa (1.0) to mount the orbiter (v1.5). don't forget when...
thingiverse
free
Tronxy Zonestar P802M Multi-Axis Overhaul Pack Bear Exxa 1.0 MK3S Optional Bowden Upcycled Extruder by JBieri
...s underway. the heat bed could be insulated and a co-planar bed leveling system would be nice additions beyond this upgrade pack.
thingiverse
free
Bear Extruder Bowden Filament Lid Conversion for Push to Fit PTFE Tube Connector by JBieri
...community who run into issues while upgrading to bear exxa desire a bowden style bear extruder, or run into...
thingiverse
free
Ram and Bear Automated Infinite Queue Printing Extruder Attachment for Automatic Print Removal Small Scale Manufacturing by JBieri
...that mounts to the lower portion of the bear exxa 1.0 on the 2020 prusa i3 mk3s. the ram...
Jbieri
thingiverse
free
Lowrider 2 CNC RAMPS Case 80mm Cooling Fan Lid by JBieri
...e of a single 80x80x10/20mm case fan, while maintaining the overall strength of the lid without significantly disrupting airflow.
thingiverse
free
Tronxy Zonestar P802M Rear Frame Plate Replacement by JBieri
...d, cut out on a cnc machine, or printed at scale as a plan drawing that could subsequently be used to cut out the plate manually.
thingiverse
free
Bear Extruder 623 Idler Door Swiss MK2S MK3S Suisse by JBieri
...ut to grégoire saunier (the original designer of the bear extruder) as a conversation piece you're in the right place. enjoy!
thingiverse
free
Bear Extruder Bowden Filament Lid Conversion for Push to Fit PTFE Tube Connector by JBieri
...ire a bowden style bear extruder, or run into issues with filament that is out of spec and causes issues with the bondtech gears.
thingiverse
free
Bear Extruder Hot End Part Cooling Fan Duct Dropped 10MM for ZoneStar Tronxy P802M Other Reprap by JBieri
...he duct work where it attaches to the part cooling fan. hopefully it significantly improves printing outcomes over the stock one.
thingiverse
free
Tronxy Zonestar P802M & Anet A8 Easy Print Top T Corner Frame Reinforcement Bracket by JBieri
...stalling it on my machine, i'm not really sure about this 'thing' original or remixed. it helps, but only marginally.
thingiverse
free
Tronxy Zonestar P802M Multi-Axis Overhaul Pack Bear Exxa 1.0 MK3S Optional Bowden Upcycled Extruder by JBieri
...s underway. the heat bed could be insulated and a co-planar bed leveling system would be nice additions beyond this upgrade pack.
thingiverse
free
Ram and Bear Automated Infinite Queue Printing Extruder Attachment for Automatic Print Removal Small Scale Manufacturing by JBieri
...s in the front centre of the push space.
i'll add ideas as i test in the future and feel free to collaborate in the comments.
Adustment
thingiverse
free
ADUSTABLE PROXIMITY SENSOR by power911
...adustable proximity sensor by power911
thingiverse
hot end with adjustable proximity sensor
thingiverse
free
Adustable Fan by Raviraj26
...aj26
thingiverse
this isadustable fan you can custmise it as per your need. also you can download propellers from other designs.
sketchfab
$10
Evil Hero Adusted Gold (Yugioh)
...//www.patreon.com/user?u=14434838 - evil hero adusted gold (yugioh) - buy royalty free 3d model by yanez designs (@yanez-designs)
thingiverse
free
Z-Endstop (Adustable) by MrHolyGas
...ts:
-main screw 1x m3x0,5 l29
-nuts 5x m3
-washers not required but recomended between "base-bot" and "butto"
thingiverse
free
Tronxy X5s Stabilized Carriage - REMIX - adustable tension by tamccain
... is rock solid and moves on the rails easily.
supports are built in to the model, and hopefully will be easy to remove for you.
thingiverse
free
Prusa I2 Y stepper bracket, adustable and removable by PeterEllens
...currently top is fractonaly to long and reduces my y travel by 3mm.
i have added a verson with shorter head, by 3mm. not test yet
thingiverse
free
Adustable Z Endstop trigger (quick solution before printing something more permanent) by Schorhr
...e mendel-variant we built.
please excuse the bad pictures, i just took them with a cellphone which is not very good ad close-ups.
thingiverse
free
Adusting Knob with Internally Integrated M3 Nut - Fits Bukito,Prusa, and Others. by codemite
...provided g-code will print all 3 knobs with the proper pause already set.
i've included the sketchup and designspark files.
thingiverse
free
iKea Lack Leg Extender with height adjustive knob by emersonwu
...ck is too short for me, i designed it to extemd the ikea lack as my picture.
it is adustive knob, the range is from 95 to 125mm.
Fixated
3d_ocean
$19
Industrial Pipeline Set // Valve and Pipe Sections
... – 4 small pipe sections; – 4 long pipe sections; – screw nuts for fixation. 3d max 2016, 2014 and 2012 files .fbx .obj vray m...
3d_export
$16
mv modern express
...at threatened to capsize, the cause being a poor fixation of the load. modeling for accidentes marítimos serie whit maya autodesk
3ddd
$1
FONTEALTA / Col30
...lange: inox steel aisi 316l, thickness 5 mm
floor fixation with threaded bars, nuts and washers, all in inox steel aisi 316l
3ddd
$1
FONTEALTA / Twiggy
... steel aisi 316l
minimal single-lever mixer, trim parts in inox steel aisi 316l
antiscale ø 90 mm concealed showerhead
3ddd
$1
Встраиваемые светильники delta light 5 видов 02
...&new;=0&type;=light®ion;=int http://www.deltalight.com/en/products/detail/downforce-r-202-42-23
3d_export
$5
Toggle clamp
...re resolution is 800x800. polygons: 127380 verticles: 127402 included max, fbx, stl and obj and formats. created in 3ds max 2018.
3d_export
$7
Tibial Intramedullary Nail
...e. solidworks 2017 modeled and 3d studio max 2018 version attached too. rendered with keyshot 7. many file formats are available.
3d_export
$55
Inflatable airlock of spacecraft Voskhod-2
...nd fixation of the cosmonaut when leaving, a system for separating the airlock from the spacecraft after the program is completed
3d_export
$10
glue injection machine
... functions of glue injection, sealing and fixation. this is also the essence of this process for original mobile phone batteries.
thingiverse
free
Angle fixation by virgin22
...angle fixation by virgin22
thingiverse
angle de fixations ou equerre
Endstop
thingiverse
free
Endstop-holder for endstop v1.2 by albiuz
...endstop-holder for endstop v1.2 by albiuz
thingiverse
endstop-holder designed for mech endstop v1.2
thingiverse
free
Endstop by 3dboxpro
...endstop by 3dboxpro
thingiverse
endstop
thingiverse
free
Endstop by 1sPiRe
...endstop by 1spire
thingiverse
endstop model for conceptions
thingiverse
free
Endstop holder for Opto or Mechanical endstops by LulzBot
... endstops by lulzbot
thingiverse
these are the standard 1.0 prusa endstops with an added mounting hole for mechanical endstops.
thingiverse
free
Endstop Holder by onurhamdiuzun
...endstop holder by onurhamdiuzun
thingiverse
endstop holder for makerbot endstop and other endstops
thingiverse
free
Endstop Cover
...endstop cover
thingiverse
cover for endstop boards for makerbot design.
thingiverse
free
Endstop Mount for optical Endstops by Whitehawk2000
...whitehawk2000
thingiverse
use two 20mm m3 screws and nuts to screw the endstop onto the mount and just clip it onto the 8mm rod.
thingiverse
free
C-beam endstop mount for Makerbot type endstops
...c-beam endstop mount for makerbot type endstops
thingiverse
c-beam endstop mount for makerbot type endstop boards.
thingiverse
free
Endstop Mount for MakerBot Mecanical Endstop. by nka
...v-slots carriage.
endstop is screw with m3 (8mm) tapped hole and the endstop hold on the extrusion using a m5 (8mm) and t-nuts.
thingiverse
free
ENDSTOP 10mm by desert500
...endstop 10mm by desert500
thingiverse
endstop
Fine
3ddd
$1
Fine Art
...fine art
3ddd
fine art lamps
торшер fine art
3ddd
$1
Fine Art_Chandelier
...fine art_chandelier
3ddd
fine art lamps
fine art_chandelier, crystal enchantment
3ddd
$1
Fine Art
...fine art
3ddd
fine art lamps
люстра и бра fine art
3ddd
$1
Fine Art
...fine art
3ddd
fine art lamps
люстра для бильярда fine art
3ddd
$1
Fine Art
...fine art
3ddd
fine art lamps
торшер и бра fine art
3ddd
$1
Fine Art
...fine art
3ddd
fine art lamps , сша
бра fine art lamps (сша)
3ddd
$1
Fine Art
...fine art
3ddd
fine art lamps , сша
люстра fine art lamps (сша)
3ddd
$1
Fine Art
...fine art
3ddd
fine art lamps , сша
настольная лампа fine art lamps (сша)
3ddd
$1
Fine Art
...fine art
3ddd
fine art lamps
светильники fine art
люстра и бра 750640
3ddd
$1
Fine Art
...fine art
3ddd
fine art lamps
светильники фирмы fine art
бра 429850
торшер 452230
люстра 429540
Axis
3ddd
$1
Мария Axis
...
3ddd
кухня , классическая , axis
модель кухни.
3d_export
$22
Axis robot 6-axis robotic arm
...ing parts drawings, standard parts purchased parts list, can be produced directly according to the drawings, welcome to download!
3ddd
free
Versatile Axis
...ddd
nexus , плитка
http://bvtileandstone.com/ceramic-porcelain/versatile-axis/
3d_export
$19
robot 2 axis
...robot 2 axis
3dexport
robot 2 axis
turbosquid
$40
Axis R5F
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$40
Axis S5F
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$30
Axis Athlon
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Linear Axis
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$15
drawing axis
...drawing axis
3dexport
simple rendering of the scene file
3ddd
$1
versatile axis ARC
...versatile axis arc
3ddd
versatile , плитка
versatile axis arc red dot design award
Bear
3d_export
$6
Bear
...bear
3dexport
bear
3d_export
$5
bearing
...bearing
3dexport
bearing
3d_export
$12
bear
...bear
3dexport
bear for 3d printing toy
3d_ocean
$9
Bearing
...ne ball ballbea bearing bearings engine hard industrial machine mechanic metal part piece plastic ring screw sphere steel
bearing
archibase_planet
free
Bear
...bear
archibase planet
statuette bear picturesque element
bear - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$5
bear
...bear
3dexport
bear have a stl.,3dm files
archibase_planet
free
Bear
...bear
archibase planet
bear animals omnivorous animal
bear angry n250907- 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Bear
...bear
archibase planet
bear animals omnivorous animal
bear easy n250907 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3ddd
$1
Teddy bear
...teddy bear
3ddd
teddy bear , медведь
teddy bear :)
3d_ocean
$12
Bear
... formats. created with 3d max 9.0. this file is very useful for learning & rigging. it can be used for any professional work.
Z
3d_export
$5
nissan z
...nissan z
3dexport
nissan z
3ddd
$1
Vase Z
...vase z
3ddd
vase z
3ddd
$1
полотенцесушить Z
...полотенцесушить z
3ddd
полотенцесушитель
полотенцесушить z
design_connected
free
Z-Chair
...z-chair
designconnected
free 3d model of z-chair designed by karman, aleksei.
design_connected
$11
Z Lamp
...z lamp
designconnected
phillips z lamp computer generated 3d model. designed by kalff, louis.
3d_export
$5
Dragon balls z
...dragon balls z
3dexport
dragon ball z
turbosquid
$20
Fighter Z
...
turbosquid
royalty free 3d model fighter z for download as on turbosquid: 3d models for games, architecture, videos. (1292563)
turbosquid
$9
Pen Z
...pen z
turbosquid
free 3d model pen z for download as obj on turbosquid: 3d models for games, architecture, videos. (1686775)
turbosquid
free
z chair
...z chair
turbosquid
free 3d model z chair for download as max on turbosquid: 3d models for games, architecture, videos. (1410230)
turbosquid
$5
Letter Z
...urbosquid
royalty free 3d model letter z for download as max on turbosquid: 3d models for games, architecture, videos. (1408540)
Screw
3d_export
$5
screw
...screw
3dexport
screw
turbosquid
$29
Screw driver and screws
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$2
Screw
... steel twist wood screw
screw 3d model in 2 different materials real world scale rendered with mental ray file formats: .max .obj
3d_ocean
$4
Screw
...n
3d bolt male mechanic metal nut parts prop propeller schraube schraubenmutter screw steel twist
screw 3d model, clean modeling.
turbosquid
$2
screw
...crew
turbosquid
royalty free 3d model screw for download as on turbosquid: 3d models for games, architecture, videos. (1198271)
turbosquid
free
Screw
...screw
turbosquid
free 3d model screw for download as obj on turbosquid: 3d models for games, architecture, videos. (1240851)
3d_ocean
$2
Frame Screw
...frame screw
3docean
construction screw
a frame screw and plug.
turbosquid
$27
screw
...w
turbosquid
royalty free 3d model screw for download as max on turbosquid: 3d models for games, architecture, videos. (1334064)
turbosquid
$20
SCREW
...
turbosquid
royalty free 3d model screw for download as sldas on turbosquid: 3d models for games, architecture, videos. (729733)
turbosquid
$1
Screws
...
turbosquid
royalty free 3d model screws for download as max on turbosquid: 3d models for games, architecture, videos. (1640360)