Thingiverse
BeagleBone Replicape Bracket by PoZCon
by Thingiverse
Last crawled date: 3 years, 2 months ago
I designed this mounting frame in Fusion360 to hold my BeagleBone Black with a Replicape cape attached. I use this on my AnyCubic Kossel Standard Delta for mounting the board in the base, and it allows some clearance between the top of the Replicape and the print surface.
Note that this mount will extend below the frame, so you need to use a set of feet to lift the delta frame off the work surface. I am using a standard set of Tennis ball mounts, and have plenty of clearance under the board.
Note that this mount will extend below the frame, so you need to use a set of feet to lift the delta frame off the work surface. I am using a standard set of Tennis ball mounts, and have plenty of clearance under the board.
Similar models
thingiverse
free
Replicape Beaglebone T slot mount with better accessibility by tnever
...work for many other beaglebone mounting applications. it is similar to the other versions listed as sources, but i...
thingiverse
free
Replicape BeagleBone T-Slot Mount by Gr33nMind
...the beaglebone black with a replicape onto a mendelmax, or any other t-slot printer. replicape is available at thing-printer.com!
thingiverse
free
Beaglebone Black & Replicape Case by OCD3D
...80mm cooling fan mounted on the top. i removed the mounting area for the 30mm fan and added an access hole for the ethernet port.
thingiverse
free
Minimal Replicape/Beaglebone Cooling Solution by Manbehindthemadness
...plicape/beaglebone cooling solution by manbehindthemadness
thingiverse
aptly named fan mount :)
uses a regular 50mm cooling fan.
thingiverse
free
Replicape Kossel Mini holder by goeland86
... my answer to the issue. three parts instead of one. the three parts are held together by the screws holding down the beaglebone.
thingiverse
free
Beaglebone case for drone by GabrielDai
...beaglebone case for drone by gabrieldai
thingiverse
a case for beaglebone blue to mount it on a standard drone frame.
thingiverse
free
Minimal Replicape/Beaglebone Cooling Solution for 80mm fan by TechMav
...ion for 80mm fan by techmav
thingiverse
just resized this to allow for mounting an 80mm fan, as i didn't have a 50mm on hand
thingiverse
free
Replicape Case by PyDrew
... top case.
use #4-40 x 1/4" or m3 x 6mm for mounting the beaglebone.
there is now a bottom case version with mounting holes.
thingiverse
free
BeagleBone Black and Replicape Box by PugPappa
... inserts, replacing them with press fit nuts on the bottom. i found that i liked this solution better than the threaded inserts.
thingiverse
free
Kulp K16A-B Mount by Hermy21
...dded a design for use with a beaglebone black. there is a wider cut out near the sd card extension path for a usb extension also.
Pozcon
thingiverse
free
AnyCubic Kossel Power Panel by PoZCon
...der (12mm diameter)
3) rectangular power switch (12.5mm x 19mm)
the panel mounts on to a pair of the 2020 extrusions in the base.
thingiverse
free
True Lemon Storage Box by PoZCon
...l hold approximately 40-50 of the little packets, and is working great.
it has saved space in my kitchen and made the wife happy.
thingiverse
free
Anycubic Kossel Power Supply Switch Cover by PoZCon
...ch, like this one on amazon.
i use this cover in combination with the simplified 2020 power supply mount designed by @blakemccoy
Replicape
thingiverse
free
Replicape BeagleBone T-Slot Mount by Gr33nMind
...the beaglebone black with a replicape onto a mendelmax, or any other t-slot printer. replicape is available at thing-printer.com!
thingiverse
free
Replicape + BBB cover by Bombel
...e together.
postprocessing: in housing base mounting holes should be improved with drill 3,5mm or make m4 threads with screw tap.
thingiverse
free
Replicape Case by PyDrew
... top case.
use #4-40 x 1/4" or m3 x 6mm for mounting the beaglebone.
there is now a bottom case version with mounting holes.
thingiverse
free
Replicape Fan Cooled Case by szeker
...ack board to provide cooling also form the bottom side.
best working with heatsinks mounted on the bottom of the stepper drivers.
thingiverse
free
Beaglebone Black & Replicape Case by OCD3D
...80mm cooling fan mounted on the top. i removed the mounting area for the 30mm fan and added an access hole for the ethernet port.
thingiverse
free
Minimal Replicape/Beaglebone Cooling Solution by Manbehindthemadness
...plicape/beaglebone cooling solution by manbehindthemadness
thingiverse
aptly named fan mount :)
uses a regular 50mm cooling fan.
thingiverse
free
Replicape Kossel Mini holder by goeland86
... my answer to the issue. three parts instead of one. the three parts are held together by the screws holding down the beaglebone.
thingiverse
free
BeagleBone Black and Replicape Box by PugPappa
... inserts, replacing them with press fit nuts on the bottom. i found that i liked this solution better than the threaded inserts.
thingiverse
free
Replicape Double Blower Case by Pr1mus285
...with supports.
takes a 40mm fan.
fusion 360 file included so modify to your hearts content.
you will need to tap those 3mm holes.
Beaglebone
thingiverse
free
Beaglebone support by GabrielDai
...beaglebone support by gabrieldai
thingiverse
support for beaglebone
thingiverse
free
beaglebone base by Polizzi
...beaglebone base by polizzi
thingiverse
case for beaglebone black.
thingiverse
free
Beaglebone Black Case by pablorosario
...beaglebone black case by pablorosario
thingiverse
beaglebone case
thingiverse
free
beaglebone wireless enclosure by rexrothppc
...beaglebone wireless enclosure by rexrothppc
thingiverse
beaglebone wireless enclosure
thingiverse
free
Beaglebone front panel by NinjaBlock
...beaglebone front panel by ninjablock
thingiverse
front pannel for a beaglebone enclosure
thingiverse
free
BeagleBone Case by canadaduane
...home.ca/printing-the-beaglebone-enclosure-part-1
blog about the lid: http://makerhome.ca/printing-the-beaglebone-enclosure-part-2
thingiverse
free
BeagleBone XM Box by buyskoen
...beaglebone xm box by buyskoen
thingiverse
an old box design for a beaglebone xm under lasercutter
thingiverse
free
Beaglebone case for drone by GabrielDai
...beaglebone case for drone by gabrieldai
thingiverse
a case for beaglebone blue to mount it on a standard drone frame.
thingiverse
free
Beaglebone black case by osteth
...beaglebone black case by osteth
thingiverse
a case for the beaglebone black -modifying for reduced open ports
thingiverse
free
BeagleBone Sled by builttospec
...le sled that mount for a beaglbone and a 400-point breadboard that's pretty useful for quick prototyping with the beaglebone.
Bracket
archibase_planet
free
Bracket
...bracket
archibase planet
bracket corbel holder
bracket 1 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Bracket
...bracket
archibase planet
bracket corbel console
bracket 5 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Bracket
...bracket
archibase planet
corbel holder bracket
bracket 6 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Bracket
...bracket
archibase planet
bracket corbel console
bracket 8 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Bracket
...bracket
archibase planet
bracket corbel holder
bracket n280911 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Bracket
...bracket
archibase planet
holder corbel bracket
bracket 9 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Bracket
...bracket
archibase planet
corbel holder bracket
bracket 10 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Bracket
...bracket
archibase planet
corbel console bracket
bracket 11 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Bracket
...bracket
archibase planet
holder console bracket
bracket 12 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Bracket
...bracket
archibase planet
bracket corbel holder
bracket 13 - 3d model (*.gsm+*.3ds) for interior 3d visualization.