Thingiverse
BBS Style Rims for 3d sets Trucks by Superclodbuster
by Thingiverse
Last crawled date: 5 years, 4 months ago
This is an optional BBS Styled wheel rim for the 3dsets trucks.
Designed if you want to give your truck a street look.
same dimensions as the stock 3dsets rims, similar construction. fits stock tires.
Use five m2x12mm Bolts to assemble.
Take care to align the Spokes of the rims with the Hex pattern for the axle the rims assemble in one rotation only, make sure your spokes, 5 bolt hardware and the axle hex are all in alignment before final assembly.
includes a tire insert to help lock and stabilize the tire in the rim without gluing. tire insert goes into the tire first line up the tire bead around the edge and install into one half of the BBS rims. align the other half correctly then assemble the tire bead should slightly be squeezed by the rim. line up the tire bead evenly front and back.
print at .15 layer height however for a better finished product use Variable Layer height on the front piece smooth the layer height down to .05mm in the detailed areas so they smooth nicer.
hardware tolerances are tighter then stock so take care assembling and installing.
Designed if you want to give your truck a street look.
same dimensions as the stock 3dsets rims, similar construction. fits stock tires.
Use five m2x12mm Bolts to assemble.
Take care to align the Spokes of the rims with the Hex pattern for the axle the rims assemble in one rotation only, make sure your spokes, 5 bolt hardware and the axle hex are all in alignment before final assembly.
includes a tire insert to help lock and stabilize the tire in the rim without gluing. tire insert goes into the tire first line up the tire bead around the edge and install into one half of the BBS rims. align the other half correctly then assemble the tire bead should slightly be squeezed by the rim. line up the tire bead evenly front and back.
print at .15 layer height however for a better finished product use Variable Layer height on the front piece smooth the layer height down to .05mm in the detailed areas so they smooth nicer.
hardware tolerances are tighter then stock so take care assembling and installing.