Thingiverse
Battery holder for Milwaukee m12 batteries by Xav_B
by Thingiverse
Last crawled date: 4 years, 5 months ago
This is a battery holder for a Milwaukee Redlithium m12 battery. on the bottom, there is two holes corresponding to the positive and negative battery terminals. I used two 14-16 AWG
crimp-on spade connectors as the contacts and hot glued them in. Note: if the battery goes in really tight, use a rotary tool and a sanding wheel to deburr the inside.
crimp-on spade connectors as the contacts and hot glued them in. Note: if the battery goes in really tight, use a rotary tool and a sanding wheel to deburr the inside.