Basic throttle and knob panel by gufo2k20

Last crawled date: 4 years, 2 months ago

Basic throttle panel with 3 axis, 4 push-encoder and one 0,96" OLED display.
I made this project for flightsims, because i like to use my PS4 joypad.
Flightsticks are good but too bulky.
This is a low profile, small profile panel. Quick to setup on your desk.
Not
OLED case and encoders locking piece are optional.
Gears can be done better (i'm a bit rusty at mechanical engineering....)
Can be easily printed and modified.
List of components:
1x Arduino Pro Micro
1x OLED 0,96" (I2C protocol)
3x potentiometer
4x push-encoder with PCB
HID device with 3 axis (X, Y and Z) plus 48 buttons.
Each encoder act as 2 buttons (left / right = 1 / 2)
Double-clicking an encoder move to the relative "index page" (Encoder1 = button from 1 to 12, encoder 2 = buttons from 13 to 24 and so on....)
OLED display indicates the currently active "page".
I'm really new at coding but made also some code. Very basic but it works.https://github.com/gufo2k20/3-axis-4-encoder