Thingiverse
![Basic 1in Mulit-Axis Tolerance Cube by 3D_Printer_Machineworks](/previews/8270132.jpg)
Basic 1in Mulit-Axis Tolerance Cube by 3D_Printer_Machineworks
by Thingiverse
Last crawled date: 3 years, 2 months ago
An absolute must have file for any 3D Printer enthusiast!
Although basic in nature, this model of a cube can be very useful when checking the alignment of your 3D Printer past what you can see with the naked eye.
For any makers or hobbyists out there that design, or are learning to design their own parts for their projects, knowing the accuaracy, or tolerance, or your 3D printer is critical for more complex projects. It is common knowledge that commercial desktop 3D Printers are not always as accurate as they can be. Knowing how much oversized or undersized a part will end up being can be very helpful when designing parts that need to fit together.
Simply orient this model to align with the X, Y, and Y axis of your slicer program(or say if the x-axis is coming out of the screen, you should be seeing the "Z" face of the block in that same orientation). Then print this block and use calipers to measure how close the dimensions are to 1in. With this block, you can easily see what tolerance your printer is at, and if that is differenct for the three seperate axis.
In my case, both the X-axis, and the Y-axis both showed and average deviation of 0.075in over 1in. Using this information, if I needed to make a 1in part fit in an 1in slot, I might undersize it by twice the amount to account for both of the parts.
Cheers!
Although basic in nature, this model of a cube can be very useful when checking the alignment of your 3D Printer past what you can see with the naked eye.
For any makers or hobbyists out there that design, or are learning to design their own parts for their projects, knowing the accuaracy, or tolerance, or your 3D printer is critical for more complex projects. It is common knowledge that commercial desktop 3D Printers are not always as accurate as they can be. Knowing how much oversized or undersized a part will end up being can be very helpful when designing parts that need to fit together.
Simply orient this model to align with the X, Y, and Y axis of your slicer program(or say if the x-axis is coming out of the screen, you should be seeing the "Z" face of the block in that same orientation). Then print this block and use calipers to measure how close the dimensions are to 1in. With this block, you can easily see what tolerance your printer is at, and if that is differenct for the three seperate axis.
In my case, both the X-axis, and the Y-axis both showed and average deviation of 0.075in over 1in. Using this information, if I needed to make a 1in part fit in an 1in slot, I might undersize it by twice the amount to account for both of the parts.
Cheers!
Similar models
thingiverse
free
![Tolerance cube (torture test) by Jacobwarren4](/t/8720576.jpg)
Tolerance cube (torture test) by Jacobwarren4
...elpful when designing pieces that fit together. if you don't account for the tolerance the pieces probably wont fit together.
thingiverse
free
![Holey Tolerance cube (torture test) by Jacobwarren4](/t/8717327.jpg)
Holey Tolerance cube (torture test) by Jacobwarren4
...elpful when designing pieces that fit together. if you don't account for the tolerance the pieces probably wont fit together.
thingiverse
free
![XYZ Quality Cube by DesignByWilliamHenry](/t/8822632.jpg)
XYZ Quality Cube by DesignByWilliamHenry
...dit 29/08/16: updated the model so its in the correct orientation, originally the x and y were round the wrong way. sorry lads...
thingiverse
free
![XY Scale](/t/4731356.jpg)
XY Scale
...ave consistent dimensions in multiple parts prints, when you might not be able to have all parts printed in the same orientation.
thingiverse
free
![Calibration Cube 10mm x 10mm x 10mm by Fr8Dog](/t/8733619.jpg)
Calibration Cube 10mm x 10mm x 10mm by Fr8Dog
...olerance using this cube. the arrow points in the y-axis direction and is how i keep track of xyz orientation following printing.
thingiverse
free
![PRUSA I3 Y X END MOTOR BLOCK Without support and with Endstop grip by tomich14](/t/8974433.jpg)
PRUSA I3 Y X END MOTOR BLOCK Without support and with Endstop grip by tomich14
...sa, makers" call the axys, for me its a x block but if you search for other parts, this block its called "y block"
thingiverse
free
![Calibration Axes by ssaggers](/t/9036358.jpg)
Calibration Axes by ssaggers
...the corrrections applied to the x axis or the y axis.
this model is 100mm in each direction, and has axis markings on each arm.
grabcad
free
![Tolerance block](/t/13204103.jpg)
Tolerance block
... test a 3d printer x, y and z tolerances to be used in designing new parts to mate and fit up after printing them on a 3d printer
thingiverse
free
![Five Cubed Puzzle by bqzero](/t/8917056.jpg)
Five Cubed Puzzle by bqzero
...5 by 5 by 5 cube ;)
in the exploded picture you can see how the parts should be oriented when you want to put he cube together.
thingiverse
free
![Basic 20x20 Cube by cris11368](/t/8297656.jpg)
Basic 20x20 Cube by cris11368
... by cris11368
thingiverse
just an example of a cube printer build. if you're here then your must know what to do with this.
Mulit
vizpark
$5
![Theater East](/t/4565557.jpg)
Theater East
...set of 3d brick textures for modern buildings, including mulittextures and 4k tileable textures with material...
vizpark
$5
![Marble Big](/t/4565584.jpg)
Marble Big
...set of 3d brick textures for modern buildings, including mulittextures and 4k tileable textures with material...
vizpark
$5
![Large Uneven](/t/4565583.jpg)
Large Uneven
...set of 3d brick textures for modern buildings, including mulittextures and 4k tileable textures with material...
vizpark
$5
![Hotel Marble](/t/4565582.jpg)
Hotel Marble
...set of 3d brick textures for modern buildings, including mulittextures and 4k tileable textures with material...
vizpark
$5
![Foreign Affairs](/t/4565581.jpg)
Foreign Affairs
...set of 3d brick textures for modern buildings, including mulittextures and 4k tileable textures with material...
vizpark
$5
![Einstein Vertical](/t/4565580.jpg)
Einstein Vertical
...set of 3d brick textures for modern buildings, including mulittextures and 4k tileable textures with material...
vizpark
$5
![Concrete Grey](/t/4565579.jpg)
Concrete Grey
...set of 3d brick textures for modern buildings, including mulittextures and 4k tileable textures with material...
vizpark
$5
![Black Marble](/t/4565578.jpg)
Black Marble
...set of 3d brick textures for modern buildings, including mulittextures and 4k tileable textures with material...
vizpark
$5
![Big White](/t/4565577.jpg)
Big White
...set of 3d brick textures for modern buildings, including mulittextures and 4k tileable textures with material...
vizpark
$5
![Office Marble](/t/4565585.jpg)
Office Marble
...set of 3d brick textures for modern buildings, including mulittextures and 4k tileable textures with material...
Machineworks
thingiverse
free
![Catalyst Machineworks Banggod Bumper by r0ck3t](/t/8061130.jpg)
Catalyst Machineworks Banggod Bumper by r0ck3t
...ks banggod bumper by r0ck3t
thingiverse
the original bumpers ordered from catalyst machineworks did not fit well, these ones do.
thingiverse
free
![Catalyst Machineworks Merica DJI Canope](/t/4785635.jpg)
Catalyst Machineworks Merica DJI Canope
...alyst machineworks merica canope with extended legs and more space for the air unit.
hope this is usefull to someone. have fun :)
thingiverse
free
![CATALYST MACHINEWORKS PIGTAIL + GPS MATEK](/t/4893602.jpg)
CATALYST MACHINEWORKS PIGTAIL + GPS MATEK
...t: 22 mm. offset 27 mm. diameter: 5 mm.
to download :https://cults3d.com/en/3d-model/game/catalyst-machineworks-pigtail-gps-matek
thingiverse
free
![Arm Guard Catalyst Machineworks Banggod 5 by MadTV_80](/t/8072111.jpg)
Arm Guard Catalyst Machineworks Banggod 5 by MadTV_80
...arm guard catalyst machineworks banggod 5 by madtv_80
thingiverse
arm guard for the catalyst machineworks banggod 5
thingiverse
free
![Catalyst Machineworks Raging Droner Cap Holder](/t/4907338.jpg)
Catalyst Machineworks Raging Droner Cap Holder
...
integrated capacitor holder for catalyst machineworks raging droner. one with holder for tbs crossfire antenna and one without.
thingiverse
free
![Catalyst Machineworks GoPro 7 Mount by SgtWoody](/t/8188928.jpg)
Catalyst Machineworks GoPro 7 Mount by SgtWoody
...ineworks superlight. this is designed to mount directly on top of the top plate.
printed with tpu at 30% infill for best results.
thingiverse
free
![Catalyst Machineworks Norris TBS Unify SMA Mount by MrPants911](/t/8686149.jpg)
Catalyst Machineworks Norris TBS Unify SMA Mount by MrPants911
...eworks norris tbs unify sma mount by mrpants911
thingiverse
catalyst machineworks superlight norris edition.
tbs unify sma mount
thingiverse
free
![Catalyst Machineworks The shocker 4" HD by Supernini](/t/8242982.jpg)
Catalyst Machineworks The shocker 4" HD by Supernini
...catalyst machineworks the shocker 4" hd by supernini
thingiverse
enjoy
thingiverse
free
![3DPOWER Canopy POD for Catalyst Machineworks Merica by 3dpowerhk](/t/8540180.jpg)
3DPOWER Canopy POD for Catalyst Machineworks Merica by 3dpowerhk
...machineworks.com/collections/all/products/merica-5-inch?variant=1232179724312
3dpower canopy pod for catalyst machineworks merica
thingiverse
free
![Catalyst Machineworks Shocker SMO 4K Mount by MechaJaeger](/t/8243940.jpg)
Catalyst Machineworks Shocker SMO 4K Mount by MechaJaeger
...alyst machineworks shocker ultralight frame. all ports and vents have cutouts and there is plenty of clearance for 5" props.
1In
turbosquid
$3
![1in Pipe](/t/13314708.jpg)
1in Pipe
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
![1in Thick Unequal Angle](/t/13314772.jpg)
1in Thick Unequal Angle
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
![1in Thick Equal Angle](/t/13314779.jpg)
1in Thick Equal Angle
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$7
![rudi loop](/t/11930456.jpg)
rudi loop
...d 1in/3cm<br>rudi loop 02 dimensions: h 35in/89cm x w 11in28cm x d 11in/28cm<br>rudi loop 03 dimensions: h 26in/66cm x...
thingiverse
free
![1in Scraper by Schubacca86](/t/8685746.jpg)
1in Scraper by Schubacca86
...1in scraper by schubacca86
thingiverse
this is a 1in scraper. personally used to scrap up caulk.
thingiverse
free
![1In screw cap by computimus](/t/8749163.jpg)
1In screw cap by computimus
...1in screw cap by computimus
thingiverse
this is a 3d print of a screw hole cover. it's set for just over a 1in hole.
thingiverse
free
![Simple Treasure Chest 1in x 1in x 1.5in by Warriorsinc](/t/8649654.jpg)
Simple Treasure Chest 1in x 1in x 1.5in by Warriorsinc
...simple treasure chest 1in x 1in x 1.5in by warriorsinc
thingiverse
a smaller treasure chest 1 x 1 x 1.5 inches
thingiverse
free
![Coupler Ring 1in by babyjesus292](/t/8789838.jpg)
Coupler Ring 1in by babyjesus292
...coupler ring 1in by babyjesus292
thingiverse
to be glued as multiple components to hold egg
thingiverse
free
![1in PVC Support](/t/4701952.jpg)
1in PVC Support
...upport
thingiverse
remix of "tube holder for filament dry box by cnckitchen" to support 1"pvc. simply scaled up.
thingiverse
free
![Desk Wire Grommet - 1in by jmdunlap01](/t/8364274.jpg)
Desk Wire Grommet - 1in by jmdunlap01
... infill on the walls, otherwise your printer might vibrate off your desk. :) print with the ring on the bed to prevent supports.
Tolerance
turbosquid
$3
![Low polygonal tolerant bear](/t/13269649.jpg)
Low polygonal tolerant bear
... polygonal bear for download as 3ds, obj, fbx, blend, and stl on turbosquid: 3d models for games, architecture, videos. (1392956)
3d_export
$50
![Micrometer 3D Model](/t/50351.jpg)
Micrometer 3D Model
...dial vernier metrological tool industrial measure measurement precision accuracy tolerance dimension mike metric micrometer 3d model plutonius 33278...
3d_export
$12
![clutch assembly line](/t/11522779.jpg)
clutch assembly line
...clutch assembly line 3dexport according to the principle of tolerance fit from left to right in the general assembly...
3d_export
$5
![puzzle cube](/t/11447214.jpg)
puzzle cube
...functions of your printer. i have left some extra tolerance at the bridge location to account for some sagging....
3d_export
$9
![beskar mandalorian steel](/t/11938207.jpg)
beskar mandalorian steel
...alloy used in mandalorian armor, notable for its high tolerance to extreme forms of damage. the metal was durable...
3d_export
$5
![4 spring Azalea Flower Bush](/t/11371359.jpg)
4 spring Azalea Flower Bush
...50cm bush 2 : 160cm bush 3 : 170cm bush 4 : 180cm formats 3ds max - vray / corona cinema 4d - vray / standard blender obj fbx stl
3d_export
$10
![varonoi lamp](/t/11891037.jpg)
varonoi lamp
...cm. al of the components are designed with small tolerance which can make it hard to scale down, but...
3d_export
$20
![9KH30 Ring die pellet machine](/t/12783167.jpg)
9KH30 Ring die pellet machine
...be smoothly made for sale according to the dimensions, tolerance and technical requirements. the characteristics of the pellet machine...
3d_export
$5
![Douglas Fir Forest trees](/t/13076500.jpg)
Douglas Fir Forest trees
...ats<br>3ds max - vray / corona<br>cinema 4d - vray / standard<br>blender<br>obj<br>fbx<br>stl
3d_export
$20
![mech-spider-ninjia](/t/11922818.jpg)
mech-spider-ninjia
...22815 verts:23663<br>animation clips: idle walk jump attack<br>textures format: jpg.<br>texture size: 4096*4096
Cube
3d_ocean
$5
![Cubes](/t/576898.jpg)
Cubes
...cubes
3docean
children cube cubes model paint toy toys wooden
old wooden children’s cubes.
3d_export
$5
![cube](/t/11920066.jpg)
cube
...cube
3dexport
cube
3d_export
$5
![cube](/t/11426889.jpg)
cube
...cube
3dexport
cube
3d_export
free
![Chemistry cube - cube chimique](/t/11377291.jpg)
Chemistry cube - cube chimique
...chemistry cube - cube chimique
3dexport
chemistry cube - cube chimique
3d_export
$10
![Cube](/t/13047181.jpg)
Cube
...cube
3dexport
cube deco
3d_export
free
![cube](/t/11495572.jpg)
cube
...cube
3dexport
invented the cube
archibase_planet
free
![Cube](/t/950074.jpg)
Cube
...cube
archibase planet
cube
g4 cube - 3d model for interior 3d visualization.
3d_export
$6
![cube](/t/11457077.jpg)
cube
...cube
3dexport
cube gamel location
archibase_planet
free
![Cube](/t/950075.jpg)
Cube
...cube
archibase planet
home furniture cube
cube - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
![Cube](/t/950076.jpg)
Cube
...cube
archibase planet
cube block die
cube eazelcom n050113 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
Axis
3ddd
$1
![Мария Axis](/t/609289.jpg)
Мария Axis
...
3ddd
кухня , классическая , axis
модель кухни.
3d_export
$22
![Axis robot 6-axis robotic arm](/t/12783060.jpg)
Axis robot 6-axis robotic arm
...ing parts drawings, standard parts purchased parts list, can be produced directly according to the drawings, welcome to download!
3ddd
free
![Versatile Axis](/t/702403.jpg)
Versatile Axis
...ddd
nexus , плитка
http://bvtileandstone.com/ceramic-porcelain/versatile-axis/
3d_export
$19
![robot 2 axis](/t/11447254.jpg)
robot 2 axis
...robot 2 axis
3dexport
robot 2 axis
turbosquid
$40
![Axis R5F](/t/13415545.jpg)
Axis R5F
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$40
![Axis S5F](/t/13415546.jpg)
Axis S5F
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$30
![Axis Athlon](/t/13447681.jpg)
Axis Athlon
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
![Linear Axis](/t/13423241.jpg)
Linear Axis
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$15
![drawing axis](/t/11697519.jpg)
drawing axis
...drawing axis
3dexport
simple rendering of the scene file
3ddd
$1
![versatile axis ARC](/t/624257.jpg)
versatile axis ARC
...versatile axis arc
3ddd
versatile , плитка
versatile axis arc red dot design award
Basic
3d_export
$5
![basic hand](/t/11457690.jpg)
basic hand
...basic hand
3dexport
basic hand, made in blender
3d_export
$10
![Basic coat](/t/11932698.jpg)
Basic coat
...basic coat
3dexport
basic coat<br>arm and waist movement
3ddd
$1
![PixMolda Basic Bed](/t/955081.jpg)
PixMolda Basic Bed
...pixmolda basic bed
3ddd
basic bed , pixellin
pixmolda basic bed by pixellin
3ddd
free
![Детский стол Basic](/t/719958.jpg)
Детский стол Basic
...етский стол basic
3ddd
basic , стол
детский стол для письма basic от производителя moll.
turbosquid
$1
![Basic Keyboard](/t/13242007.jpg)
Basic Keyboard
...osquid
royalty free 3d model basic keyboard for download as on turbosquid: 3d models for games, architecture, videos. (1298685)
turbosquid
$1
![Basic Chair](/t/13242472.jpg)
Basic Chair
...urbosquid
royalty free 3d model basic chair for download as on turbosquid: 3d models for games, architecture, videos. (1269713)
turbosquid
$1
![basic table](/t/13277814.jpg)
basic table
...urbosquid
royalty free 3d model basic table for download as on turbosquid: 3d models for games, architecture, videos. (1271450)
turbosquid
free
![Basic Sword](/t/13241482.jpg)
Basic Sword
...urbosquid
royalty free 3d model basic sword for download as on turbosquid: 3d models for games, architecture, videos. (1331031)
turbosquid
free
![Basic Bandit](/t/13400731.jpg)
Basic Bandit
...
turbosquid
free 3d model basic bandit for download as blend on turbosquid: 3d models for games, architecture, videos. (1250561)
turbosquid
free
![Turret basic](/t/13339317.jpg)
Turret basic
...
turbosquid
free 3d model turret basic for download as blend on turbosquid: 3d models for games, architecture, videos. (1382326)
Printer
archibase_planet
free
![Printer](/t/953267.jpg)
Printer
...inter
archibase planet
printer laser printer pc equipment
printer n120614 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
![Printer](/t/948798.jpg)
Printer
...rchibase planet
laser printer office equipment computer equipment
printer - 3d model (*.gsm+*.3ds) for interior 3d visualization.
turbosquid
$100
![Printer](/t/13321669.jpg)
Printer
...er
turbosquid
royalty free 3d model printer for download as on turbosquid: 3d models for games, architecture, videos. (1487819)
turbosquid
$3
![Printer](/t/13445289.jpg)
Printer
...turbosquid
royalty free 3d model printer for download as max on turbosquid: 3d models for games, architecture, videos. (1670230)
turbosquid
$1
![printer](/t/13411543.jpg)
printer
...turbosquid
royalty free 3d model printer for download as max on turbosquid: 3d models for games, architecture, videos. (1595546)
turbosquid
$1
![printer](/t/13411546.jpg)
printer
...turbosquid
royalty free 3d model printer for download as max on turbosquid: 3d models for games, architecture, videos. (1595105)
turbosquid
$10
![Printer](/t/13513230.jpg)
Printer
...id
royalty free 3d model printer for download as max and 3dm on turbosquid: 3d models for games, architecture, videos. (1607146)
turbosquid
$7
![Printer](/t/13247007.jpg)
Printer
...royalty free 3d model printer for download as ma, ma, and obj on turbosquid: 3d models for games, architecture, videos. (1644580)
turbosquid
$30
![Printer](/t/13261758.jpg)
Printer
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
![Printer](/t/13238487.jpg)
Printer
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.