Thingiverse
BaneBots P60 Gearbox 1/5 Maxstone Crawler Wheels evil-rover02 by evil_k
by Thingiverse
Last crawled date: 3 years, 1 month ago
These parts allow mounting a 1/5 Scale Maxstone Crawler wheel assembly to the 1/2" shaft on a BaneBots P60 series gear reducer.
Reducer shown is P60S-3333-57, 129:1 reduction. Motor is Racerstar 3660 Brushless Waterproof Sensorless Motor (2600kV) from BangGood. Only have two gear boxes/motors, so only built one axle so far so do not know how it will perform. Testing with 3C LiPo and suspecting may be too fast for what I want but will see in the future.
Already had the 1/5 scale Maxstone Crawler. Link to purchase the wheel assemblies is:http://www.nitrorcx.com/51c00-98102.html (part number 51C00-98102.) Website says tire diameter is 115mm, but mine measure just over 185mm.
Two holes to secure inside part to shaft are sized to be taped for 10-32 threads. Used 3/4" long machine screws for assembly while waiting for 10-32 x 1/2" set screws to arrive. Use flat washer and 10-32 x 1/2" machine screw to hold the outer part to the 1/2" gear box shaft. Require 1/8 key stock, 1.25" long.
Assembly:
put key stock into key way on shaft with end of key stock just shy end of shaft
slide inside part onto shaft (holes should already be threaded and machine screws installed
secure outside part onto end of shaft
slide inside part all the way to end of shaft so contacts outside part
tighten set screws on inside part
remove outside part
put wheel assembly on and press on. The inside part will be slightly recessed with the outside of the wheel hub. Secure outside part to shaft. This is keyed to the key stock and will only fit in one position.
Shaft on the motor I used is slightly too long for the P60 gear box. Have included a 1.5mm spacer to go between the motor and the gear box. Will need M3x10mm cap head machine screws to secure the motor to the gear box (included M3x8mm will be too short.)
Update: 1.5mm and 2.0mm motor spacers do not provide enough clearance inside the gear box. Have added a 3.0mm motor spacer for the Racerstar 3660 motor. Added a 6mm motor spacer for a Turnigy XK3674 motor (3mm longer shaft). Turnigy motor has not been tested on the gear box yet.
Also included a fixture I used to hold the motor square in my bench vise to allow pressing the pinion gear on the motor shaft. Requires M5x10mm (if I remember correctly!!) to press against the rear end of the motor shaft to reduce the possibility of damaging the motor bearings/shaft.
Added drill templates for drilling gear box mounts. This gear box uses the 4 stage template. Made the 3 stage template the Banebots 38:1 P60 gear box (another project).
Added brackets I used to hold the axle assembly to my rover chassis. Aluminum in the pictures is 2" x 1/16" aluminum angle from Lowes. The 2" angle gives a bit of room between the motor/gear box and the rover chassis to allow for a heat sink on the motor.
Unit works great with the 129:1 gearboxes and the Racerstar 3660 motor. Replaced the Racerstar ESC with a re-flashed HobbyKing 60A ESC 4A UBEC (F-60A), one per motor. Works much better than the Racerstar ESC and lower in cost. No button to push to turn it on or braking whether you want it or not. Plus full reverse speed.
Needed the 129:1 gear boxes for another project, so am now using:
Gear Boxes: BaneBots P60S-333-57, P60 Gearbox, Standard, 38:1, For RS-500 or RS-700 Motor
Motors: AndyMark am-3104, NeveRest Classic Motor ONLY (am-3104)
ESC: RoboClaw 2x15A, 6-34VDC (two of these, plus encoder cables - each motor has its own ESC channel.)
This combination works pretty good, too - lots of torque, and can almost climb walls. Works much better with an ESC channel per motor instead of connecting two motors in parallel. Using one RoboClaw for the two left motors and the other for the two right motors. If trying to climb an obstruction and end up with a motor in the air, if the two motors were connected in parallel (on the same ESC channel), then the motor in the air would be spinning and there would be no torque being developed in the motor trying to climb over the obstacle.
2018 April 09:
Added files for parts in latest pictures - gear box mounting brackets for the 3 stage P60 gear box, underside guard and holder for 3/4 square aluminum tubing used to house motor/encoder cables to the front, fenders, blank chassis end plates (photos show temporary end plates used for construction), and mounts for 2x30A Roboclaw motor controller. Have not done anything for a top cover yet.
Uploaded the correct motor/gear box support brackets.
Reducer shown is P60S-3333-57, 129:1 reduction. Motor is Racerstar 3660 Brushless Waterproof Sensorless Motor (2600kV) from BangGood. Only have two gear boxes/motors, so only built one axle so far so do not know how it will perform. Testing with 3C LiPo and suspecting may be too fast for what I want but will see in the future.
Already had the 1/5 scale Maxstone Crawler. Link to purchase the wheel assemblies is:http://www.nitrorcx.com/51c00-98102.html (part number 51C00-98102.) Website says tire diameter is 115mm, but mine measure just over 185mm.
Two holes to secure inside part to shaft are sized to be taped for 10-32 threads. Used 3/4" long machine screws for assembly while waiting for 10-32 x 1/2" set screws to arrive. Use flat washer and 10-32 x 1/2" machine screw to hold the outer part to the 1/2" gear box shaft. Require 1/8 key stock, 1.25" long.
Assembly:
put key stock into key way on shaft with end of key stock just shy end of shaft
slide inside part onto shaft (holes should already be threaded and machine screws installed
secure outside part onto end of shaft
slide inside part all the way to end of shaft so contacts outside part
tighten set screws on inside part
remove outside part
put wheel assembly on and press on. The inside part will be slightly recessed with the outside of the wheel hub. Secure outside part to shaft. This is keyed to the key stock and will only fit in one position.
Shaft on the motor I used is slightly too long for the P60 gear box. Have included a 1.5mm spacer to go between the motor and the gear box. Will need M3x10mm cap head machine screws to secure the motor to the gear box (included M3x8mm will be too short.)
Update: 1.5mm and 2.0mm motor spacers do not provide enough clearance inside the gear box. Have added a 3.0mm motor spacer for the Racerstar 3660 motor. Added a 6mm motor spacer for a Turnigy XK3674 motor (3mm longer shaft). Turnigy motor has not been tested on the gear box yet.
Also included a fixture I used to hold the motor square in my bench vise to allow pressing the pinion gear on the motor shaft. Requires M5x10mm (if I remember correctly!!) to press against the rear end of the motor shaft to reduce the possibility of damaging the motor bearings/shaft.
Added drill templates for drilling gear box mounts. This gear box uses the 4 stage template. Made the 3 stage template the Banebots 38:1 P60 gear box (another project).
Added brackets I used to hold the axle assembly to my rover chassis. Aluminum in the pictures is 2" x 1/16" aluminum angle from Lowes. The 2" angle gives a bit of room between the motor/gear box and the rover chassis to allow for a heat sink on the motor.
Unit works great with the 129:1 gearboxes and the Racerstar 3660 motor. Replaced the Racerstar ESC with a re-flashed HobbyKing 60A ESC 4A UBEC (F-60A), one per motor. Works much better than the Racerstar ESC and lower in cost. No button to push to turn it on or braking whether you want it or not. Plus full reverse speed.
Needed the 129:1 gear boxes for another project, so am now using:
Gear Boxes: BaneBots P60S-333-57, P60 Gearbox, Standard, 38:1, For RS-500 or RS-700 Motor
Motors: AndyMark am-3104, NeveRest Classic Motor ONLY (am-3104)
ESC: RoboClaw 2x15A, 6-34VDC (two of these, plus encoder cables - each motor has its own ESC channel.)
This combination works pretty good, too - lots of torque, and can almost climb walls. Works much better with an ESC channel per motor instead of connecting two motors in parallel. Using one RoboClaw for the two left motors and the other for the two right motors. If trying to climb an obstruction and end up with a motor in the air, if the two motors were connected in parallel (on the same ESC channel), then the motor in the air would be spinning and there would be no torque being developed in the motor trying to climb over the obstacle.
2018 April 09:
Added files for parts in latest pictures - gear box mounting brackets for the 3 stage P60 gear box, underside guard and holder for 3/4 square aluminum tubing used to house motor/encoder cables to the front, fenders, blank chassis end plates (photos show temporary end plates used for construction), and mounts for 2x30A Roboclaw motor controller. Have not done anything for a top cover yet.
Uploaded the correct motor/gear box support brackets.
Similar models
thingiverse
free
evil-rover02 BaneBots P60 Gear Box Pro-Line Badlands MX43 by evil_k
...l (even less on the inside), so the tires will offer minimal shock absorbing capabilities compared to the maxstone crawler tires.
thingiverse
free
evil-rover03 BaneBots P60 Gear Box RC4WD Demolisher by evil_k
...a speed machine.
have included various thickness of motor spacers to go between the motor and the p60 gear box.
no top built yet.
grabcad
free
Banebot Motor with 64:1 Gear box
...banebot motor with 64:1 gear box
grabcad
banebot motor with 64:1 gearbox, ( shaft diameter 0.5 inch)
thingiverse
free
FRC Andymark / Banebots Motor Hub and Shaft Adapter by portalengineer
...dymark or banebots motors. the hub fits into most andymark wheels and the shaft adapter fits into a standard 0.5" keyed hub.
grabcad
free
Banebots P60
...banebots p60
grabcad
banebots p60 4-stage gearbox: standard, 528:1, for rs-500 motor
grabcad
free
Banebot motor-gear head assembly
...anebot motor-gear head assembly
grabcad
this is the assembled cad model of banebot motor with gear head with rpm reduction 256:1
thingiverse
free
BaneBots P60 Gearbox to Tetrix for FTC NeveRest by LectricLegends8417
...x. we are using this with our shooter motors, which are bare neverest motors attached to the 4:1 gearbox.
cheers from team 8417!
3dwarehouse
free
Banebots 16:1 P60 (18v 775)
...s 16:1 p60 (18v 775)
3dwarehouse
cad model of the banebots 16:1 p60 gearbox with an 18v 775 motor fitted. gearbox made by ellis.
3dwarehouse
free
Banebots 16:1 P60 (12v 775)
...ts 16:1 p60 (12v 775)
3dwarehouse
cad model of the banebots 16:1 p60 gearbox with a 12v 775 motor fitted. gearbox made by ellis.
grabcad
free
Banebots P60 132:1 w_RS-300 motor mount
...bots gearbox used for robotic applications. more information could be found here: http://www.banebots.com/product/p60s-555-3.html
Maxstone
thingiverse
free
Maxstone Crawler Side Battery Holder by evil_k
...hingiverse
allow holding two batteries on the outside of the maxstone crawler frame. this is for the 1/5 scale maxstone crawler.
thingiverse
free
Maxstone Crawler Tank Tracks by evil_k
... servo to give the crawler four wheel steering and made a short video (poor quality) of the crawler: https://youtu.be/zooronermsm
thingiverse
free
Animusoft - MaxStone 1/5 Scale Crawler Drone Enclosure by animusoft
...
1x stock ecs from maxstone
ports for usb, hdmi, power switch
camera housing for raspberry pi infrared / nightvision camera
thingiverse
free
Clodbuster Wheel adapter for Maxstone 10 Crawler by gwidgery
...nally got my truck back up and running, and the big tires do very well in the snow. the adapters held up to the abuse just fine.
thingiverse
free
Exceed Maxstone 10 LED Rock Light Bar by gwidgery
.... i did have to modify the led, they were wired too close together, so i had to solder some wires in between to get them to fit.
thingiverse
free
ExceedRC Maxstone 10 Crawler Winch Mount by gwidgery
...h is a rc4wd wireless bulldog winch.
link to the winch:
http://store.rc4wd.com/bulldog-9300xt-wireless-winch-black_p_957.html
thingiverse
free
evil-rover02 BaneBots P60 Gear Box Pro-Line Badlands MX43 by evil_k
...thingiverse wanted to put the wheels back on the maxstone crawler, so purchased a couple of sets of pro-line...
Banebots
thingiverse
free
Banebot motor cap by cheverus5265
... needed to mount our banebot motor in an exposed area of the robot and designed a cap that will cover the electronic connections.
thingiverse
free
Banebots P60K Shaft to 3/5" Adapter by Wiifi
... are using it to adapt our banebots gearbox shaft to pvc fitting.
updated with v2 to fit our bolts.
created by frc team #2470
thingiverse
free
BaneBots P60 Gearbox to Tetrix for FTC NeveRest by LectricLegends8417
...x. we are using this with our shooter motors, which are bare neverest motors attached to the 4:1 gearbox.
cheers from team 8417!
thingiverse
free
FRC Andymark / Banebots Motor Hub and Shaft Adapter by portalengineer
...dymark or banebots motors. the hub fits into most andymark wheels and the shaft adapter fits into a standard 0.5" keyed hub.
thingiverse
free
Banebots 16 mm spur gearmotor bracket by sistemasorp
...6mm spur gearmotors. so i designed a robust one that fits in ff-030 and ff-050 series. the holes are for 3mm nuts and bolts (m3).
thingiverse
free
Banebot Wheel Hex Hub by kittka
...ct for easily making 4 wheel drive systems from two motors!
for the setscrew, you will need to tap the side hole with a 6-32 tap.
3dcadbrowser
free
Banebots Transmission 3D CAD ModelFree
...3d object can be downloaded in .step, .iges, .max, .obj, .3ds, .fbx, .dxf, .lwo, .stl, .wrl, .ma, .dae, .x and .asc file formats.
thingiverse
free
evil-rover02 BaneBots P60 Gear Box Pro-Line Badlands MX43 by evil_k
...l (even less on the inside), so the tires will offer minimal shock absorbing capabilities compared to the maxstone crawler tires.
thingiverse
free
Frc Bearing Block by Dominickferone
...bearing block by dominickferone thingiverse a modification to the banebots bearing block made slightly wide and taller to help...
thingiverse
free
evil-rover03 BaneBots P60 Gear Box RC4WD Demolisher by evil_k
...a speed machine.
have included various thickness of motor spacers to go between the motor and the p60 gear box.
no top built yet.
P60
3ddd
$1
Leucos - Dracena P60
...leucos - dracena p60
3ddd
leucos , dracena
leucos - dracena p60
60x30 h56
3ddd
free
Камера Cisco CTS-CAM-P60
...m-p60
3ddd
вэб-камера , cisco
камера cisco telepresence precision 60 camera cts-cam-p60.
3d_sky
free
Leucos - Dracena P60
...leucos - dracena p60
3dsky
leucos dracena
leucos - dracena p60 60x30 h56
3dfindit
free
NFM6-P60
...nfm6-p60
3dfind.it
catalog: yuki giken
3d_sky
free
Camera Cisco CTS-CAM-P60
...camera cisco cts-cam-p60
3dsky
web camera cisco
cisco telepresence precision camera 60 camera cts-cam-p60.
3dfindit
free
P60 Q Plate FPR GFCI Device
...p60 q plate fpr gfci device
3dfind.it
catalog: abb installation products
thingiverse
free
P60 drop-in mount for quadcopter. by Sneezy3D
...t's power to reduce heat, or make a diy heat sink that presses into the back of the brass pill.
the driver is now external...
thingiverse
free
BaneBots P60 Gearbox to Tetrix for FTC NeveRest by LectricLegends8417
...x. we are using this with our shooter motors, which are bare neverest motors attached to the 4:1 gearbox.
cheers from team 8417!
thingiverse
free
T-Motor Pacer P60 4-in-1 ESC DUMMY by tomtomtomtomtomtomtomtomtomtomto
...omtomtomtomtomtomtomto
thingiverse
t-motor pacer p60 4-in-1 esc dummy in .stl for printing and .stp for creating someting new :)
thingiverse
free
P60 Punisher Handgun (Mutant Chronicles RPG)
...lug for those who wants to color it bright orange and have it as a safety for walking the floor at cons and such.
hope you enjoy!
Crawler
3d_ocean
$35
Crawler Excavator
...crawler excavator
3docean
944 litronic crawler excavator
3d model of a 944 litronic crawler, excavator
turbosquid
$180
The crawler
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$150
crawler
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$49
skull crawler
...quid
royalty free 3d model skull crawler for download as ztl on turbosquid: 3d models for games, architecture, videos. (1253660)
3d_export
$100
crawler excavator
...
3dexport
crawler excavator, yellow colour. available in files formats: obj, sketch up, solidworks, step, , creo, catia v4, iges
3d_export
$5
rock crawler
...rock crawler
3dexport
hello, i put a 3d model created by me, it is a rock crawler car, thank you very much for your attention.
turbosquid
$500
NASA Crawler
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$130
crawler-crane
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$48
Crawler Robot
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
Metalic Crawler
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Gearbox
3d_export
$7
planetary gearbox
...planetary gearbox
3dexport
planetary gearbox
3d_export
$5
transmission gearbox
...transmission gearbox
3dexport
transmission gearbox
3d_export
$30
differential gearbox
...differential gearbox
3dexport
3d model of a differential gearbox.<br>modeled in solidworks.<br>rendered in keyshot.
turbosquid
$4
planetary gearbox
...royalty free 3d model planetary gearbox for download as blend on turbosquid: 3d models for games, architecture, videos. (1423384)
3d_export
$5
three stage planetary gearbox
...three stage planetary gearbox
3dexport
three stage planetary gearbox
turbosquid
$31
2 speed reducer Gearbox
... dual stage helical speed reducer gearbox for download as iam on turbosquid: 3d models for games, architecture, videos. (1650029)
3d_export
$15
automatic processing line for gearbox pump body
...automatic processing line for gearbox pump body
3dexport
automatic processing line for gearbox pump body
3d_export
$1000
Automobile Manual Transmission mechanism Gearbox 3D Model
...ox 3d model
3dexport
transmission gearbox
automobile manual transmission mechanism gearbox 3d model daveterminator 24996 3dexport
3d_export
$8
tool replacement gearbox
...tool replacement gearbox
3dexport
eccentric lifting mechanism, you can process according to available drawings.
3d_export
$7
milling machine spindle drive diagram - milling gearbox
... n = 4500 rin / min; maximum power p = 7.5 kw. bt40 spindle, like welcome to download to learn. there are igs format files in it.
Evil
3d_export
$5
Evil yoda
...evil yoda
3dexport
evil yoda<br>stl
3d_export
$10
EVIL 3D Model
...evil 3d model
3dexport
evil dagger edge skull
evil 3d model evil 13163 3dexport
3d_export
$5
Evil Skeleton
...evil skeleton
3dexport
evil skeleton model rigged with texture map included working on maya
3d_export
$5
doofenshmirtz evil inc
...doofenshmirtz evil inc
3dexport
doofenshmirtz evil inc
3d_export
$5
Evil eye
...e-playing game of the forgotten realms and greyhawk universe; they were later transferred to a number of other fantasy universes.
turbosquid
$30
Evil knight
...urbosquid
royalty free 3d model evil knight for download as on turbosquid: 3d models for games, architecture, videos. (1595171)
turbosquid
$2
Evil Goblin
...urbosquid
royalty free 3d model evil goblin for download as on turbosquid: 3d models for games, architecture, videos. (1466495)
turbosquid
$4
Evil Candle
...y free 3d model evil candle for download as dds, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1545230)
turbosquid
$3
Evil rabbit
...y free 3d model evil rabbit for download as c4d, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1704687)
3d_ocean
$8
Evil Brain
...gue
this is a 3d model (low poly) “evil brain”. triangles: 1188. diffuse texture (hand painted): 1024×1024.tga. formats: mb, obj.
K
turbosquid
$1
Swedish-K / K-Pist
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
free
K lamp
...k lamp
3ddd
k lamp
3ddd
free
Giano K
...giano k
3ddd
стеллаж
книжные полки giano k
3ddd
$1
K-table
...k-table
3ddd
henge furniture , письменный
k-table by henge furnitures
design_connected
$13
Thin-K
...thin-k
designconnected
kristalia thin-k computer generated 3d model. designed by bertoncini, luciano.
design_connected
$9
Miss K
...miss k
designconnected
flos miss k table lights computer generated 3d model. designed by philippe cramer.
3ddd
$1
Papatya / Ego-K
...papatya / ego-k
3ddd
papatya
papatya / ego-k
3ddd
$1
DeMajo 2612/K
...demajo 2612/k
3ddd
demajo
люстра demajo 2612/k
turbosquid
$14
Fence K
...turbosquid
royalty free 3d model fence k for download as fbx on turbosquid: 3d models for games, architecture, videos. (1314643)
turbosquid
$7
K for Key
...rbosquid
royalty free 3d model k for key for download as max on turbosquid: 3d models for games, architecture, videos. (1689776)
Wheels
archibase_planet
free
Wheel
...l steering control steering wheel
wheel ship steering wheel n060215 - 3d model (*.gsm+*.3ds+*.max) for exterior 3d visualization.
3d_ocean
$14
Wheel
...wheel
3docean
car rim car wheel rim wheel
high poly car wheel design. 16,840 polys
3d_export
free
wheel
...wheel
3dexport
wheel
3d_export
free
wheel
...wheel
3dexport
wheel
3d_export
free
Wheel
...wheel
3dexport
wheel
3d_export
$5
wheel
...wheel
3dexport
wheel for car.
3d_export
$5
wheel
...wheel
3dexport
car wheel
3d_export
$5
wheel
...wheel
3dexport
car wheel
3d_export
$5
wheel
...wheel
3dexport
car wheel
3d_export
$5
wheel
...wheel
3dexport
car wheel
5
turbosquid
$6
Rock 5-5
...urbosquid
royalty free 3d model rock 5-5 for download as obj on turbosquid: 3d models for games, architecture, videos. (1639063)
3d_export
$5
hinge 5
...hinge 5
3dexport
hinge 5
turbosquid
$10
A-5
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
A-5
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$12
Calligraphic Digit 5 Number 5
...hic digit 5 number 5 for download as max, obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1389333)
3ddd
$1
5 роз
...5 роз
3ddd
5 роз в стеклянной вазе
design_connected
$11
iPhone 5
...iphone 5
designconnected
apple iphone 5 computer generated 3d model.
3ddd
$1
Lola 5
...lola 5
3ddd
miniforms
lola 5 miniforms 300*65*134
3ddd
$1
Nexus 5
...dd
nexus , phone , телефон
google nexus 5 phone
3d_ocean
$15
iPhone 5
...iphone 5
3docean
3d 4d apple cinema iphone model modeling phone screen texture
iphone 5 3d model and texture realistic iphone 5.
1
turbosquid
$69
armchairs(1)(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
ring 1+1
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
chair(1)(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$8
Chair(1)(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
RING 1(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
house 1(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
Table 1(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$59
Formula 1(1)
...lty free 3d model formula 1 for download as max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1567088)
design_connected
$11
No 1
...no 1
designconnected
sibast no 1 computer generated 3d model. designed by sibast, helge.
turbosquid
$2
desert house(1)(1)
...3d model desert house(1)(1) for download as 3ds, max, and obj on turbosquid: 3d models for games, architecture, videos. (1055095)