Ball gag 42mm with socket screws by whitesocksgirl

Last crawled date: 3 years, 2 months ago

A 42mm ball gag with decorative socket screws. A kinky accessoire if you want to play ‘Fifty Shades’, or in any other way want to shut up your partner…
Believe me… the steel screws feel quite weird and you don’t talk much :)
The 2 parts lock together with a M5x25 socket head screw. 2 pins or M3x12 set screws lock the parts in place so they can’t turn.
The gag is designed to accomodate a 11x22 (3mm thick) steel chain. Of course you could use some pieces of rope also.
The decorative socket screws are M4x6 and the holes should be tapped M4.
The outer shell will print solid to get a much nicer print, but the holes can be punched afterwards and drilled 3.2mm
You don’t need to put all the socket screws in if you don’t want too… and PLEASE be carefull with the teeth. Maybe leave the middle row of screws out if it doesn’t feel ok. Play it safe… it’s only a game!
I printed one in Colorfabb nGen FLEX and that material is much softer on the teeth!
The parts are printable without support.