Thingiverse
Babyhawk Simple Bumper by piglet_74
by Thingiverse
Last crawled date: 2 years, 11 months ago
Just designed this prop bumper for my babyhawk so I can reduce weight and still have some protection. I have not printed it yet and don't know how much weight it saves. It's designed to be 1.5mm thick where the mounting screws are so it should allow the reuse of the same screws without interfering with the motors. But always measure yours to be sure.
*** Edited the screw hole spacing. Made an error laying it out originally. Should be 8.3mm center to center diagonally.
*** Opened up the center hole as the BH has a short tube under the motor. The hole alignment was good but I felt like it was too heavy and overly built so I created a lighter V2 version. two of the V2 guards weigh 2.36 grams compared to the original 3.55 grams.
*** Edited the screw hole spacing. Made an error laying it out originally. Should be 8.3mm center to center diagonally.
*** Opened up the center hole as the BH has a short tube under the motor. The hole alignment was good but I felt like it was too heavy and overly built so I created a lighter V2 version. two of the V2 guards weigh 2.36 grams compared to the original 3.55 grams.
Similar models
thingiverse
free
Babyhawk Simple Landing Gear by piglet_74
...ake sure so you don't damage your motors.
*** edited the mounting hole spacing. should be 8.3mm center to center diagonally.
thingiverse
free
EMAX BabyHawk 2 HD Landing Pad by cmacclel
...babyhawk 2. i hate bumpers that use the motor screws so this was designed to be applied with a small amount of double sided tape.
thingiverse
free
Carisma GT24B Front Bumper by aliveathome
...oles and buy new m1.4 10mm countersunk screws for the front holes.
i've included the original sketchup-file for easier remix.
thingiverse
free
Babyhawk AIO VTX camera mount for FT gremlin by chad lewis by Rejectedoriginal
...yer height at 40mm/s
soft mounts:https://www.thingiverse.com/thing:2814905
motor guards:https://www.thingiverse.com/thing:2814987
thingiverse
free
ShenDrone Squit V2 Motor bumpers/skids by insidethemindofmatt
...motor bumpers/skids by insidethemindofmatt
thingiverse
motor bumper/skids for the shendrone squirt v2
12mm motor screw footprint
thingiverse
free
Motor Guard For FT gremlin by CHAD LEWIS by Rejectedoriginal
...class frame designed by chad lewis and the stock babyhawk 1104 5250kv motors.
designed to print at .1mm in taulman bridge nylon.
thingiverse
free
astrox sl5 V2 shark fin
...two front or middle holes
it's better to use aluminum screws and nuts for the weight
the weight is 2 grams without the screws
thingiverse
free
Ikea motorized motor blind with 3mm holes
...e plastic which is more than enough for this application.
cred to the original designer. very nice addition to my home automation
thingiverse
free
Aurora 100 thick frame by 171MarsMaker
...en screw holes so battery is flush on the bottom frame. thinner tail for the led lights to fit
aurora100-topplate - the top plate
thingiverse
free
Flightboard Light Nose with Motor Mount by Hijrianza
...holes). you probably have to drill a hole in the center of the motor mount so the motor shaft won't stuck to the motor mount.
Babyhawk
thingiverse
free
BabyHawk R Case by Harp_FPV
...babyhawk r case by harp_fpv
thingiverse
carrying case for my babyhawk r 2"
thingiverse
free
BabyHawk Antenna Tubes by piglet_74
...babyhawk antenna tubes by piglet_74
thingiverse
tubular antenna mount for babyhawk. i used wd40 spray can straws and superglue.
thingiverse
free
Emax BabyHawk Roll Fin by SgtWoody
... r. should slip right on with the standoff within. i printed it laying on its back for sturdiness with supports on the underside.
thingiverse
free
Babyhawk R 2.5" Arms by Daubut
...babyhawk r 2.5" arms by daubut
thingiverse
this is a replacemnt 2.5" arm for the emax babyhawk r. enjoy
thingiverse
free
Shark Fin for Babyhawk R by KwadDojo
...shark fin for babyhawk r by kwaddojo
thingiverse
shark fin for aid with turtle mode for babyhawk r
print in tpu
thingiverse
free
Babyhawk R replacement frame by brandf
...awk r replacement frame by brandf
thingiverse
this 3d printable frame is intended as a replacement frame for the 2in babyhawk r.
thingiverse
free
Babyhawk Battery Holder by DoubleDeckerDog
...older works with 20mm by 20mm. i it will probably need to be modified to fit the stock battery.
it was printed with makerbox abs.
thingiverse
free
Emax Babyhawk Battery tray by R11B3N
...ax babyhawk battery tray by r11b3n
thingiverse
babyhawk (r) battery tray fits an 6x3 battery, have strap and battery lead slots!
thingiverse
free
Babyhawk R AXII antenna mount by SexyMiniQuads
...babyhawk r axii antenna mount by sexyminiquads
thingiverse
holds luminier axii antenna in place on emax babyhawk r
thingiverse
free
Babyhawk lipo protection by blade98000
...abyhawk lipo
you can print it on the major surface without support
hope you will like and tell me how to improve it if necessary.
Piglet
3d_ocean
$6
Wild piglet
...al meat pet pig piglet pork runt sausage scrofa shoat sow stag swine wild wild piglet wildlife
a detailed model of a wild piglet.
3d_export
$25
Wild piglet 3D Model
...ilt sow barrow shoat domestic animal mammal boar scrofa farm hunt pet babe meat
wild piglet 3d model laurenstrimpe 67060 3dexport
3d_export
$20
piglet wilson low-poly
... rigged: + formats : abc, dae, fbx, mtl, obj, stl, svg, x3d, blend thanks for your shopping and views modeled by gomenyuk see you
archibase_planet
free
Pig
...pig archibase planet toy pig piglet pig-alarm - 3d model (*.gsm+*.3ds) for interior 3d...
archibase_planet
free
Pig
...pig archibase planet toy young pig piglet pink-pig - 3d model (*.gsm+*.3ds) for interior 3d...
archive3d
free
Pig 3D Model
...pig 3d model archive3d toy pig piglet pig-alarm - 3d model (*.gsm+*.3ds) for interior 3d...
archive3d
free
Pig 3D Model
...pig 3d model archive3d toy young pig piglet pink-pig - 3d model (*.gsm+*.3ds) for interior 3d...
3d_export
$40
Roasted pig 3D Model
...pig roast meat pork plate garnish food meal dish piglet suckling luau roasted pig 3d model rmilushev 38139...
3d_ocean
$8
happy pig cartoon
...game happy lightwave lowpoly lwo mamalia model obj pig piglet smile 3d model happy pig optimized for high poly...
3d_export
$10
Roast pig 3D Model
...giving day medieval middle ages game ready low poly piglet pork roast pig 3d model redbird3d 92011...
74
3ddd
$1
АК-74
...ак-74
3ddd
ак-74 , калашников
высокополигональная модель автомата ак-74.
3d_export
$5
AK-74
...ak-74
3dexport
ak-74 assault rifle, i will give half the money to the zsu (military forces of ukraine)
turbosquid
$15
AK-74
...4
turbosquid
royalty free 3d model ak-74 for download as fbx on turbosquid: 3d models for games, architecture, videos. (1565749)
turbosquid
$5
AK-74
...4
turbosquid
royalty free 3d model ak-74 for download as fbx on turbosquid: 3d models for games, architecture, videos. (1245656)
3ddd
$1
Italamp 74-S
...italamp 74-s
3ddd
italamp
потолочная люстра italamp 74-s
turbosquid
$20
Bath 74
... free 3d model bath 74 for download as max, dxf, fbx, and dwg on turbosquid: 3d models for games, architecture, videos. (1277139)
turbosquid
$20
Bath 74
... free 3d model bath 74 for download as max, dxf, fbx, and dwg on turbosquid: 3d models for games, architecture, videos. (1277138)
turbosquid
$95
AK-74
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$7
ak-74
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$6
akc-74
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Bumper
turbosquid
free
Bumper
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
bumper car.br3
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
bumper arb toyota fortuner
...bumper arb toyota fortuner
3dexport
bumper arb toyota fortuner
3d_export
$7
front bumper
... it to use in other car, here it is for you. also if you need some help, tell us, and we will be happy to give you want you need.
turbosquid
$20
Red Bumper Car
...model red bumper car for download as 3ds, obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1322171)
turbosquid
$35
Agri Bumper Tractors
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$89
Bumper Car 2014
...y, in real units of measurement, qualitatively and maximally close to the original. model formats: - *.max (3ds max 2008 scanl...
3d_export
$99
Bumper Car 2014 3D Model
...car cars bumping dashing dodgem dodgems noname no name branding brand 2010 2011
bumper car 2014 3d model humster3d 98135 3dexport
cg_studio
$99
Bumper Car 20143d model
...o
.max .obj .mb .lwo .fbx .c4d .3ds - bumper car 2014 3d model, royalty free license available, instant download after purchase.
turbosquid
free
Free Car Bumper Stand
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Simple
turbosquid
$1
Simple goblet (Taca simples)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
simple bench
...simple bench
3dexport
the simple bench which can be used in simple projects or video-games.
3d_export
$5
simple knob
...simple knob
3dexport
simple knob
3d_export
$5
simple handle
...simple handle
3dexport
simple handle
3d_export
$5
simple button
...simple button
3dexport
simple button
3d_export
$5
simple spindle
...simple spindle
3dexport
simple spindle
3d_export
$5
simple wheel
...simple wheel
3dexport
simple wheel
3d_export
$5
simple chair
...simple chair
3dexport
simple blue chair
3d_export
free
Simple room
...simple room
3dexport
here is a simple but beautiful room
3ddd
free
SIMPLE | Кресло
...io cianfarra , simple
производитель area declic дизайн giulio cianfarra коллекция simple