Thingiverse
B-daman Crash Tower by Foxtopus
by Thingiverse
Last crawled date: 4 years, 5 months ago
3D printable version of the Crash Tower from Crash B-daman
Print 6 of the pins and 3 of the tower pillars, just print a single one of each of the other pieces.
Please note this model has been test fitted with the official crash tower, most parts fit decently in the official version. Do note that you may have to lower your printer bed to get the fitting right by reducing squish, if not you'll have to sand down some parts.
For the hexagonal plate, I suggest printing it in two pieces and gluing it together carefully unless you have dissolvable supports, or enjoy removing large chunks of support from flat surfaces.
Print 6 of the pins and 3 of the tower pillars, just print a single one of each of the other pieces.
Please note this model has been test fitted with the official crash tower, most parts fit decently in the official version. Do note that you may have to lower your printer bed to get the fitting right by reducing squish, if not you'll have to sand down some parts.
For the hexagonal plate, I suggest printing it in two pieces and gluing it together carefully unless you have dissolvable supports, or enjoy removing large chunks of support from flat surfaces.