Thingiverse
Axial Ryft RBX10 - Clamshell Roof by silverbullet126
by Thingiverse
Last crawled date: 4 years, 2 months ago
By popular request (well maybe just one person), I created a roof for the Axial Ryft RBX10.
You'll need 7 - 2.5 x 100mm zip ties; I'd print this in PETG or Nylon for maximum strength; though really PLA will maybe hold up. 3rd picture shows the best way to connect the back zip ties.
For getting the infill off, I found the best way, was to get a think knife or lifter under the infill and work it all the way around, if you've got your printer set right it'll all come off in one peice.
You'll need 7 - 2.5 x 100mm zip ties; I'd print this in PETG or Nylon for maximum strength; though really PLA will maybe hold up. 3rd picture shows the best way to connect the back zip ties.
For getting the infill off, I found the best way, was to get a think knife or lifter under the infill and work it all the way around, if you've got your printer set right it'll all come off in one peice.