Thingiverse
Avalon Game Box Insert by Kyle_Hensley
by Thingiverse
Last crawled date: 4 years, 5 months ago
Avalon
Game box insert for Avalon. Made to accommodate sleeved cards, but unsleeved cards will also fit.
The Resistance version can be found here: https://www.thingiverse.com/thing:4572949
Sliced with Cura 4.4.0 and the settings used were optimized for print speed.
Line Height - 0.28
Line Width - 0.4
Wall Thickness - 1.2
Wall Line Count - 3
Top/Bottom Thickness - 1.04
Top Layers - 3
Bottom Layers - 2
Infill Density - 10
Infill Pattern - Grid
Print Temperature - 210
Build Plate Temperature - 60
Build Plate Adhesion Type - None
Printed on a Creality Ender 3.
The filament used was Overture 1.75 PLA
Feel free to leave comments and post your finished prints. I will be creating a catalog of game inserts for many popular games. Donations are always welcome, as a lot of this is trial and error as I test these designs.
Game box insert for Avalon. Made to accommodate sleeved cards, but unsleeved cards will also fit.
The Resistance version can be found here: https://www.thingiverse.com/thing:4572949
Sliced with Cura 4.4.0 and the settings used were optimized for print speed.
Line Height - 0.28
Line Width - 0.4
Wall Thickness - 1.2
Wall Line Count - 3
Top/Bottom Thickness - 1.04
Top Layers - 3
Bottom Layers - 2
Infill Density - 10
Infill Pattern - Grid
Print Temperature - 210
Build Plate Temperature - 60
Build Plate Adhesion Type - None
Printed on a Creality Ender 3.
The filament used was Overture 1.75 PLA
Feel free to leave comments and post your finished prints. I will be creating a catalog of game inserts for many popular games. Donations are always welcome, as a lot of this is trial and error as I test these designs.