Thingiverse
ATX Power Supply by Metropolitan
by Thingiverse
Last crawled date: 3 years ago
with this quick design and print ( you can see on the photos the 0.25 layer was not a good choice to make) I was able to reuse a old ATX Power unit as a Desktop power supply.
There is no big trick about it.
I just cut off the connectors and soldered the wires to 4mm single connectors.
Color code
Green >> connected to Black with a switch and the Power supply starts up.
Black >> Ground
Orange >> 3.3V to connect the LED i used a 220Ohm resistor
Red >> 5V to connect the LED i used a 270Ohm resistor
Yellow >> 12V to connect the LED i used a 680Ohm resistor
Blue >> -12V to connect the LED i used a 680Ohm resistor ( since it is -12V you need o connect the LED the "wrong way around". The Katode goes to the Blue and Anode to black).
Thats it quick and easy power for many projects to come.
There is no big trick about it.
I just cut off the connectors and soldered the wires to 4mm single connectors.
Color code
Green >> connected to Black with a switch and the Power supply starts up.
Black >> Ground
Orange >> 3.3V to connect the LED i used a 220Ohm resistor
Red >> 5V to connect the LED i used a 270Ohm resistor
Yellow >> 12V to connect the LED i used a 680Ohm resistor
Blue >> -12V to connect the LED i used a 680Ohm resistor ( since it is -12V you need o connect the LED the "wrong way around". The Katode goes to the Blue and Anode to black).
Thats it quick and easy power for many projects to come.
Similar models
thingiverse
free
ATX Power supply quick lab connector REMIXED by AlexandreGomes
... in some cases , the holes for the leds must be increased with a drill . do not need much , just enough to hold the led in place.
thingiverse
free
ATX Powersupply quick lab connector by james_III
...from old printer or somewhere...
i will draw upgrade to this someday with molex connectors, so 12v can be used to maximum load.
thingiverse
free
ATX Power Supply (with USB & variable PSU) by mBmD
...you'll be handling dangerous voltages, powerful capacitors.
i decline any responsibility in case of any incident or accident.
thingiverse
free
Hakko T12 AT/ATX version front (STM32 and simple version) by ZhenyaKa
...d - black wire)
very cheap and good solution with many options and mega fast heating (about 7 seconds).
pcb was bought on taobao.
thingiverse
free
ATX Bench Power Supply by robertguy
...r
search youtube: "greatscott! diy lab bench power supply"
instructables - greatscott! diy lab bench power supply
thingiverse
free
Power Supply Box by abdelhadj
...e (power on signal)
you can add other features like usb socket...that's why i'm also posting the solidworks (2013) files.
thingiverse
free
ATX Power supply PSOn jumper by 3dwkl
...thout using a mainboard.
use at your own risk. i'm not responsible for any damage to your powersupply or anything else ;->
thingiverse
free
12V, 3W High Power LED Assembly by logan
...e 3.3/5v i/o lines to make the board controllable.
if there's interest, i can upload cam files for easy submission to itead.
thingiverse
free
Ender 3 LED bar - 12V without converter
...an either connect it to your mainboard for example on the 24v connectors going to the hotend fan or directly to the power supply.
thingiverse
free
Emerson 12V 55A Power Supply (7001484) Bracket by Khepri
... the 12v connections and used 10mm strain reliefs to secure these.
the powerswitch is connected with a 2.5x5 mm dupont connector.
Atx
turbosquid
$100
Giant Atx 690
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
free
ATX ZALMAN Z9 Plus
...㎜ fan x 1 (120㎜ blue led fan x 1 standard)
сверху 120㎜ /140㎜ fan x 2 (120ԩ
humster3d
$75
3D model of Vetex Sidewinder ATX 3000 Forklift 2011
... vetex sidewinder atx 3000 forklift 2011 in various file formats. all our 3d models were created maximally close to the original.
3d_export
$20
The Computer case 3D Model
...model 3dexport computer case big full super tower htpx atx the computer case 3d model mackandco 34251...
3d_ocean
$17
Computer Case
...computer case 3docean atx case computer corsair full game gaming pc psu full...
3d_export
$8
soporte para gpu
...actualmente instalado en un gabinete corsair spec alpha gabinete atx gaming con una asus turbo rtx 2060 se puede...
3ddd
free
Корпус Asus Vento Chassis TA-883 500W
...сбора компьютеров на базе материнских плат форматов atx и microatx подробнее:http://hard.rozetka.com.ua/asus_vento_chassis_ta883_500w/p161251/ код производителя ta-883 500w тип корпуса miditower материал...
sketchfab
$5
ATX Motherboard
...c block, modelled to scale,
atx form factor,
last update 21/06/21 - atx motherboard - buy royalty free 3d model by cavicom (@asi)
thingiverse
free
motherboard atx by joselcl98
...motherboard atx by joselcl98
thingiverse
motherboard model atx
thingiverse
free
ATX holder by diegocr
...atx holder by diegocr
thingiverse
holder to place an atx power under the table.
Metropolitan
3ddd
free
Metropolitan
...metropolitan
3ddd
metropolitan
размер (шхвхг): 336х69х105 см
design_connected
$27
Metropolitan
...metropolitan
designconnected
poliform metropolitan computer generated 3d model. designed by massaud, jean-marie.
3ddd
free
Valmori Metropolitan
...valmori metropolitan
3ddd
metropolitan , valmori
кресло valmori metropolitan
3ddd
$1
Minka Metropolitan
...minka metropolitan
3ddd
minka , metropolitan
бра из коллекции minka metropolitan
3ddd
$1
Minka Metropolitan
...minka metropolitan
3ddd
minka , metropolitan
бра из коллекции minka metropolitan
3ddd
$1
Кресло Metropolitan
...кресло metropolitan
3ddd
b&b italia , metropolitan
кресло metropolitan
turbosquid
$39
Metropolitan
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Poliform - Metropolitan
...poliform - metropolitan
3ddd
poliform
poliform - metropolitan дизайнер jean-marie massaud
3ddd
$1
LM92 METROPOLITAN
...nd high quality of craftsmanship the metropolitan chair falls within the golden era of furniture history, known as danish modern.
design_connected
$27
Metropolitan 270
...metropolitan 270
designconnected
poliform metropolitan 270 2-seater computer generated 3d model. designed by jean-marie massaud.
Supply
turbosquid
$1
supplies
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
black supply
...black supply
3dexport
black supply size: 57.9 x 29.2 x 34 sm
turbosquid
$20
Office Supplies
...lty free 3d model office supplies for download as max and obj on turbosquid: 3d models for games, architecture, videos. (1273636)
3d_export
free
office supplies
...office supplies
3dexport
turbosquid
$8
Supply Drop
...e 3d model supply drop for download as fbx, obj, dae, and stl on turbosquid: 3d models for games, architecture, videos. (1663721)
turbosquid
$75
Supply Helicopter
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$65
Supply Ship
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$29
Village Supplies
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$19
Power Supply
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
school supplies
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Power
turbosquid
$100
power
...ower
turbosquid
royalty free 3d model power for download as on turbosquid: 3d models for games, architecture, videos. (1421990)
3d_export
$5
Power
...power
3dexport
3d_export
$5
power outlets
...power outlets
3dexport
power outlets
3ddd
$1
lion power
...lion power
3ddd
лев , статуя
lion power gold sculpture
3ddd
$1
Sea Power
...
компас , море , часы
часы с компасом sea power
3ddd
free
Meridiani / Power
...power
3ddd
meridiani , круглый
стол power производитель meridiani, диаметр 120,высота 67
3d_export
$5
Power Surge
...power surge
3dexport
the power surge is a all mesh carnival ride to lower in game part count and lag
turbosquid
$8
Airport Ground Power Unit (AXA Power )
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$50
Power Houser
...rbosquid
royalty free 3d model power houser for download as on turbosquid: 3d models for games, architecture, videos. (1333800)
3d_export
$5
power outlet
...power outlet
3dexport
power outlet<br>format file maya 2018, 3d max 2017, obj, fbx