Thingiverse
Attify IoT Badge Case for JTAG SPI I2c Uart by drfrog
by Thingiverse
Last crawled date: 4 years, 7 months ago
This project was developed in Bobcad for the Attify Badge board. The board is a JTAG SPI UART I2c reader. Here is the link to help those get started in Pentesting IoT devices.
The build this was printed on an UP2 Mini the tolerance was very tight did not have to scale the design as it worked perfect. You may need to clean the top pins on the case as well as the pins holding the circuit board as this will make it easier to lock in. The fit is snug and will hold the PCB in place otherwise. https://www.attify-store.com/collections/frontpage/products/attify-badge-assess-security-of-iot-devices
Happy hacking lets secure the IoT after all every wireless printer has the potential to impact the security of our network if not secured properly.
The build this was printed on an UP2 Mini the tolerance was very tight did not have to scale the design as it worked perfect. You may need to clean the top pins on the case as well as the pins holding the circuit board as this will make it easier to lock in. The fit is snug and will hold the PCB in place otherwise. https://www.attify-store.com/collections/frontpage/products/attify-badge-assess-security-of-iot-devices
Happy hacking lets secure the IoT after all every wireless printer has the potential to impact the security of our network if not secured properly.