Thingiverse
Atmel STK500 breadboard bridge
by Thingiverse
Last crawled date: 5 years, 8 months ago
Hi,
this bridge supports a small breadboard on top of your STK500. It covers the socket section, which is mostly unused when programming and testing.
I used this breadboard, it is cheap and self adhesive:https://www.reichelt.de/experimentier-steckboard-400-kontakte-weiss-rnd-255-00005-p253200.html
The bridge slides on the extension sockets of the STK500 and can easily be removed.
Make a cut in the cornes of the rectangular tubes if the bridge fits too tight.
I recommend using petg, it is a bit more flexible than pla and the cuts are easier to make.
Have fun!
this bridge supports a small breadboard on top of your STK500. It covers the socket section, which is mostly unused when programming and testing.
I used this breadboard, it is cheap and self adhesive:https://www.reichelt.de/experimentier-steckboard-400-kontakte-weiss-rnd-255-00005-p253200.html
The bridge slides on the extension sockets of the STK500 and can easily be removed.
Make a cut in the cornes of the rectangular tubes if the bridge fits too tight.
I recommend using petg, it is a bit more flexible than pla and the cuts are easier to make.
Have fun!