Thingiverse
Atari SIO plug 400/800/600xl etc. by piep3d
by Thingiverse
Last crawled date: 3 years, 1 month ago
This is a remix - slight modification - of norm8332's SIO plug. I scaled it to 95% to print in PLA and changed the fastener to an M3 x 10-mm cap head screw with no nut.
The first one I made failed because I wasn't careful with soldering the wires to the contacts - I made the mistake of too much wire length protruding under the spring. The correct way is shown in the photographs - no wire under the spring. Seems to work.
I used 7x20 gauge sprinkler system cable. It is a little stiff, but I was too impatient to order and found this at the local home improvement store.
The first one I made failed because I wasn't careful with soldering the wires to the contacts - I made the mistake of too much wire length protruding under the spring. The correct way is shown in the photographs - no wire under the spring. Seems to work.
I used 7x20 gauge sprinkler system cable. It is a little stiff, but I was too impatient to order and found this at the local home improvement store.
Similar models
thingiverse
free
Atari SIO plug assist
... contacts to the wires and put the wires in the recesses. plug the extension with the wires into the plug. now it fits perfectly.
thingiverse
free
Atari SIO plug with FTDI PCB by peterholly
...he adapter in sio daisy-chain.
you may want to use the transparent filament in order to see the rx/tx activity diodes on the pcb.
thingiverse
free
Extended SIO plug by Montezuma
...atari 8-bit peripheral devices.
note that there is no opening for a cable, since i assumed that the device is placed in the plug.
3dwarehouse
free
Springs
...re springs i created using a plug-in i wrote and which you can download from my website. #helix #mechanical #spiral #spring #wire
thingiverse
free
Spark plug wire separator 6 cyl (8mm wire) by Supernova_6969
...ine's heat warped them all and the wires came out of them. that's why i have no photos; that happened before i took any.
thingiverse
free
IKEA Ledberg Socket REMIX by giuliopierucci
...0.75 rigid copper wires and bend for match holes. i used super glue to secure wires coatings to plugs
sorry for my dirty floor :d
thingiverse
free
Taller C14 Electrical Housing by turboscirocco
... the box made by t0b1.
i just found the original box was too shallow to actually fit the plug & switch into with good wires.
thingiverse
free
Spark Plug Wire Holder Customizer
...rse
spark plug wire holder for organizing wires under the hood. customizer allows for 2-6 wires ranging for most wire diameters.
thingiverse
free
Falafel mold
...e other spring or need for changes.
p.s. this spring isn't too strong for my hand but could be a problem for someone else :)
thingiverse
free
Lipo balance plug protector (click in) by JustinLimoges
...t to tug on wires too much.
i also added a bump to add more tension. may be trimmed if too tight depending on your specific plug.
600Xl
thingiverse
free
Atari 600XL key replacement by peterholly
...ilt 3
1.8, // top skew
//dish profile
3, // dish type
0, // dish depth
0, // dish skew x
0 // dish skew y
],
thingiverse
free
Atari SIO plug 400/800/600xl etc. by norm8332
...d/467825 (for example) these are reel, they also come in bags.
i have used this in a 400, 800 and 600xl and it is working great.
3dwarehouse
free
Concrete Pipe Head Joint_Dia.600xL.1250.skp
...detail, para drafter muda..subcribe untuk saya. (for those of you who like details, young drafters, subscribe for me.) & like
3dwarehouse
free
U-Ditch_W.400xH.600xL.1200.skp
...detail, para drafter muda..subcribe untuk saya. (for those of you who like details, young drafters, subscribe for me.) & like
3dwarehouse
free
Concrete Pipe Head Joint_Dia.600xL.2500.skp
...detail, para drafter muda..subcribe untuk saya. (for those of you who like details, young drafters, subscribe for me.) & like
3dwarehouse
free
U-Ditch_W.600xH.600xL.1200.skp
...detail, para drafter muda..subcribe untuk saya. (for those of you who like details, young drafters, subscribe for me.) & like
3dwarehouse
free
U-Ditch_W.500xH.600xL.1200.skp
...detail, para drafter muda..subcribe untuk saya. (for those of you who like details, young drafters, subscribe for me.) & like
Piep3D
thingiverse
free
Bed Correct Print for Prusa by piep3d
...er of my bed falls away and the level correction is necessary for me to print anything that is not small and centered on the bed.
thingiverse
free
Double Pendulum Replacement Link by piep3d
...t for the laser-cut wooden 88-mm link in the tinker crate double pendulum project. good for when baby sister breaks your project.
thingiverse
free
Stackable Dishes for Doll House by piep3d
...e shelf of the calico critters cabinet. the table is set with 2 plates and 2 cups. the hutch has two plates on display. have fun!
thingiverse
free
Atari XL/XE USB Power Adapter Box by piep3d
...-bit computers and solder to a micro-usb connector. salvage the nameplate off the power supply and decorate the boring black box.
thingiverse
free
House by piep3d
...house by piep3d
thingiverse
this is a model of a house for a christmas ornament. read about its creation here.
thingiverse
free
Brick Adapters: Duplo and Playmobile 123 by piep3d
...dapters: duplo and playmobile 123 by piep3d
thingiverse
these bricks are lego duplo-sized/compatible adapters to playmobile 123.
thingiverse
free
Recycled CD Cases Dollhouse (remix) by piep3d
...trong and a little flexible. it is tough enough to survive my 2-yr old. there are more photos of the finished product on my blog.
thingiverse
free
Syrtis Major by piep3d
...er (mola) and exaggerated about 70x. read more at http://jeffpiepmeier.blogspot.com/2017/06/mars-middle-school-and-3d-models.html
thingiverse
free
Destiny Ghost - Hanger by piep3d
...now the ghost can hang from a line or be suspended from a boom and used in a costume. read about the build experience on my blog.
Sio
thingiverse
free
Atari SIO plug assist
... contacts to the wires and put the wires in the recesses. plug the extension with the wires into the plug. now it fits perfectly.
thingiverse
free
Atari SIO plug with FTDI PCB by peterholly
...he adapter in sio daisy-chain.
you may want to use the transparent filament in order to see the rx/tx activity diodes on the pcb.
thingiverse
free
Atari SIO2USB case by james7780
...sk emulator.
update 2019-01-19: made the slots in the top and bottom case parts slightly wider so that sio plug would fit easier.
thingiverse
free
Steckerklemmer für ein ATARI SIO-Stecker by oobdoo
...cker by oobdoo
thingiverse
klemmsystem für einen atari sio-stecker, wenn der molex crimpkontakt nicht auf position bleiben will.
thingiverse
free
ATARI XL / XE SIO2SD Case (RetroFun) by Skauen239
...e-with-lcd-blue-sio-cable-full-set-/172396529342
if you like my design, please feel free to help me buy some more filament! :)
thingiverse
free
Z80 Membership Card Tall Case by Waltermixxx
...an altoids mint tin. with the addition of the sioram/cp/m card, the altoids tin was no longer tall enough...
thingiverse
free
SDrive-Max (Atari_XL replacement Floppy disk) case for Arduino Uno with Touchscreen by 8bit-retro
...with sd cart slot for arduino uno r3 atari sio plug https://www.thingiverse.com/thing:1831769 4 countersunk screw : diameter 2,2mm length...
thingiverse
free
ATARI SIO Stecker by oobdoo
...helt verwendet. den kabelklemmer habe ich als einzelnes bauteil entworfen, damit man unterschiedliche durchmesser verwenden kann.
thingiverse
free
Extended SIO plug by Montezuma
...atari 8-bit peripheral devices.
note that there is no opening for a cable, since i assumed that the device is placed in the plug.
Atari
3ddd
$1
Atari 2600
...tari , ретро , консоль
ретро консоли atari 2600
3d_ocean
$19
C64 Model G
...c64 model g 3docean 80s atari bread box c16 c64 cbm commodore commodore 64 computer...
3d_ocean
$19
Atari 2600 Bundle Complete
...: .max; .3ds; .fbx textures include console controllers cartridges box important note: all scene and material made with 3ds ma...
3d_export
$5
Space Invader 3D Model
...space invader 3d model 3dexport space invaders game atari space invader 3d model download .c4d .max .obj .fbx...
cg_studio
$35
Atari Joystick3d model
...d model
cgstudio
.3ds .max .obj .wrl - atari joystick 3d model, royalty free license available, instant download after purchase.
cg_studio
$110
Atari 2600 VCS3d model
...d model
cgstudio
.3ds .max .obj .wrl - atari 2600 vcs 3d model, royalty free license available, instant download after purchase.
3ddd
$1
atari cartridge
...atari cartridge
3ddd
картридж , приставка
poly:6500
vert:7500
retro
3ddd
$1
Atari 2600
...2600
3ddd
atari , консоль , картридж
atari 2600
3d_ocean
$16
Commercial arcade machine
...commercial arcade machine 3docean arcade atari game jeton machine makine technology token hello there. three...
cg_studio
$79
Atari 26003d model
...e nostalgia classic system cartridge
.max - atari 2600 3d model, royalty free license available, instant download after purchase.
800
3ddd
$1
мойка накладная "Imperial" 6080-R
...накладная "imperial" 6080-r 3ddd мойка мойка накладная "imperial", размер 800600, арт....
3ddd
$1
Стол журнальный BOITE L, BAXTER S.R.L.
...дерева, отделка зеркальная. ширина (w): 1600 mm, глубина (d): 800 mm, высота (h): 330 mm детали: основа: массив дерева...
3ddd
$1
Двери "Стендор"
...2011-2014+ fbx и отдельно сохранены материалы. размер дверного полотна 8002000 ...
3ddd
$1
Витрина
...тонированным стеком. фасады - паркет французская елочка. габаритные размеры 8001700*600 превью и текстуры в...
3ddd
$1
Анимация флага
...3ddd анимация , флаг анимация флага на ветру - 800 кадров, анимация храниться в самом файле, отсюда и такой...
3d_ocean
$15
Minibar "Globe"
...table (mini-bar), a globe. dimensions: l / w /h 800560x780 ...
3d_ocean
$29
Fantasy Castle Ruins
...8k total tris: 14k the average poly of each: 400-800 ...
3ddd
$1
Монитор DELL P190ST
...1024 пикселей, обеспечивая просторная зона контента в сочетании с 800 1. (типичное) контрастность и 85% (типичный) цвета гамма за...
3ddd
$1
VERBA TV TABLE
...под тв ширина: 1660 мм глубина: 590 мм высота: 800 мм техподдержка:...
3ddd
$1
Maytoni ARM321-08-G
...maytoni люстра maytoni arm321-08-g (коллекция elegant) высота: 400 диаметр: 800 цвет: белое золото ламп: 8 x e14 (60w)...
400
3ddd
$1
Christopher Guy 76-0150
...guy , журнальный стол журнальный, christopher guy 76-0150, италия (1300*1300*400 ...
3ddd
$1
Безкаркасное кресло "цветок"
...безкаркасное кресло "цветок" 3ddd безкаркасное , кресло , цветы 400 тыс. полигонов, в архиве max 2013, obj кому нужен...
3ddd
$1
Floor Angle Lamp
...angle lamp 3ddd workroom floor angle lamp by workroom 400 mm w x 1550 mm...
3ddd
$1
Концепт 85 фабрика Цвет & стиль
...стиль" (россия), коллекция концепт 85. габариты: шкаф-пенал 1700 х 400 х 357, консоль с раковиной 525 х 850 х...
3ddd
$1
Настенное зеркало (Сборник №3)
...зеркало "колдун". производитель - comptoir de famille, арт. 121840 (d=400 мм) 2) круглое зеркало в раме "мистик" (d=700 мм)...
3ddd
$1
CTO Array
...array светильник array английской фирмы сто, коллекция 2012-2013. размеры: 400250, высота 640...
3ddd
$1
Artek FLOOR LAMP A808
...artek фабрика: artek модель: floor lamp a811 размеры, мм: 400 (диаметр); 1630 (высота) дизайнер: alvar aalto описание: торшер, напольный...
3d_ocean
$1
Mirror
...a mirror with a white frame facecount: 25 (subsurfed: 400 ...
3d_ocean
$29
Fantasy Castle Ruins
...8k total tris: 14k the average poly of each: 400800 ...
3ddd
$1
Пуф "Люкс" Homemotions
...homemotions 3ddd пуф , homemotions пуф "люкс" от homemotions, 600*400450 ...
Plug
3ddd
$1
Mr Suicide Bath Plug
...mr suicide bath plug
3ddd
mrsuicide , затычка
mr suicide bath plug
3d_ocean
$3
Schuko Socket
...schuko socket 3docean electricity energy outlet plug connector power power point safety socket schuko socket wall...
3d_ocean
$19
Kitchen 4
...beautiful and simple kitchen. made without the use of plugins. all textures are...
3d_ocean
$3
Fishing Hook
...fish fisher fishing hook lake line mouth ocean outdoor plug river saltwater sea sport water worm add more detail...
3ddd
$1
Artek A101 Pendant Lamp
...1952 steel, painted white or black.polished brass ring.light fixture plug white or blackplastic cable, 250 cm.11w, e27 (compact fluorescent)60w,...
archive3d
free
Hat 3D Model
...hat 3d model archive3d hat stovepipe hat tall hat plughat hat n281213 - 3d model (*.gsm+*.3ds+*.max) for interior 3d...
archive3d
free
Socket 3D Model
...socket 3d model archive3d socket plug socket wall outlet socket triple - 3d model (*.gsm+*.3ds)...
archive3d
free
Socket 3D Model
...socket 3d model archive3d socket plug socket wall outlet socket twin - 3d model (*.gsm+*.3ds)...
3ddd
$1
Finish Plug-in Sconce
...finish plug-in sconce
3ddd
finish plug-in sconce
finish plug-in sconce
3d_ocean
$5
USB Stick
...usb stick 3docean 32gb computer memory plug plugin protection usb usb stick an usb stick with...
Etc
3d_ocean
$12
Desk accessories (pen, eraser, etc.)
...ats included: .c4d, .obj – the model contains 58530 polygons – not rigged, scene setup / lighting from the preview, are included.
3d_ocean
$4
HD Crown Water Paint Liquid Splash 02
...high detailed, can be used by designers in advertisement etc it’s...
3d_ocean
$5
low poly tree packs in 8 models
...obj format. this model is suitable for making games etc available in 8 models of...
3d_ocean
$12
Church Low Poly
...of church. good choice for visualizations, video games and etc possible in: c4d r11, c4d r15, max 2010, dae...
3d_ocean
$25
Ferry Building
...building good choice for arhitecture vizualisations, video games and etc possible in: c4d r11, c4d r15, max 2010, dae...
3d_ocean
$8
Low-Poly Toon Male Base
...toon male base mesh, ready to sculpt, texturing, rigging, etc ready to use in games and apps. please rate...
3d_ocean
$4
HD Abstract Water Paint Liquid Splash 29
...high detailed, can be used by designers in advertisement etc it’s simulated in realflow...
3d_ocean
$19
Oil Pump (Pumpjack)
...pumpjack good choice for arhitecture vizualisations, video games and etc possible in: c4d r11, c4d r15, max 2010, dae...
3d_ocean
$25
HDRi - 003 - Landscape with trees in high quality
...used in any 3d program (3ds max, maya, c4, etc. these are the panoramic hdri spherical type and 180ºx360º....
3d_ocean
$7
Gas Station
...can be rigged, has room inside with walls, doors etc model is optimized and game...