Thingiverse
Atari RPI3 Case Vinyl Cuts by theonlygood
by Thingiverse
Last crawled date: 4 years, 5 months ago
This is a minor remix to HauntFreaks incredible Raspberry PI 3 case based on previous work by zennmaster. You will still need all of the parts from one of them, except the front panel.
I removed the logo engraving on the front panel and created 2 vinyl cut SVG patterns to use on a Cricut, Cameo or similar device. I used a wood grain vinyl from Amazon (that I bought too much of) and standard silver vinyl for the logo. The highlight around the control panel was done with an orange paint pen.
I removed the logo engraving on the front panel and created 2 vinyl cut SVG patterns to use on a Cricut, Cameo or similar device. I used a wood grain vinyl from Amazon (that I bought too much of) and standard silver vinyl for the logo. The highlight around the control panel was done with an orange paint pen.