Thingiverse
ASW28 battery support for v2 ( Volantex hobbyking ) by Ehubin
by Thingiverse
Last crawled date: 4 years, 6 months ago
This is a battery support for ASW28 v2.
I wanted to fit a Zippy compact 2200 mah battery ( https://hobbyking.com/fr_fr/zippy-compact-2200mah-3s-25c-lipo-pack.html)
as it is 10.9 mm long, it could fit just in front of the wheel were the fuselage is the widest, but i needed a special support piece. Here it is.
It replaces the original wooden piece (about same weight) and allows to get good CG without having to remove the wheel. It has 2 slots to re-use the original velcro strap. It can be fastened to the fuselage using 2 of the original scews holding the wooden support piece.
I include my openscad file in case you want to remix it.
I wanted to fit a Zippy compact 2200 mah battery ( https://hobbyking.com/fr_fr/zippy-compact-2200mah-3s-25c-lipo-pack.html)
as it is 10.9 mm long, it could fit just in front of the wheel were the fuselage is the widest, but i needed a special support piece. Here it is.
It replaces the original wooden piece (about same weight) and allows to get good CG without having to remove the wheel. It has 2 slots to re-use the original velcro strap. It can be fastened to the fuselage using 2 of the original scews holding the wooden support piece.
I include my openscad file in case you want to remix it.