Thingiverse
Assortment system (Thinner / Lots of variations) by JohanQ
by Thingiverse
Last crawled date: 4 years, 11 months ago
I remixed the assortment system to have almost every combination of box imaginable.
I also made the walls thinner so that when printing with a 0.5mm nozzle it only prints two walls, thus saving on plastic.
So far I tried the 50x50mm and the 100x100mm and these were very strong.
Next I'll try the bigger formats and see if it's strong enough with two walls, if not, I'll change them to some thicker walls for the bigger formats. (update coming)
I also made the walls thinner so that when printing with a 0.5mm nozzle it only prints two walls, thus saving on plastic.
So far I tried the 50x50mm and the 100x100mm and these were very strong.
Next I'll try the bigger formats and see if it's strong enough with two walls, if not, I'll change them to some thicker walls for the bigger formats. (update coming)