Thingiverse
Artillery Genius Floating top Bearing by maalie
by Thingiverse
Last crawled date: 4 years, 8 months ago
OK OK so this is me playing around with the Z axis on my Artillery Genius. Results are somewhat promising with giving the Z axis a bit more yes more room to wiggle instead of constraining it. Toyed around with the idea after noting that the gantry is not bolted down to the lead screw nuts but instead seem to wander back and forth while moving upwards.
This consists of two printed parts for each lead screw.
One skateboard bearing per leadscreew.
Other things to consider is that I have my sync belt removed and Spider-couplers mounted.
The orange cubes were printed before and the green cube printed after. this was in the middle of me starting a flow-calibration.... It lead me down somewhat of a rabbit hole but ehh what to do.
This consists of two printed parts for each lead screw.
One skateboard bearing per leadscreew.
Other things to consider is that I have my sync belt removed and Spider-couplers mounted.
The orange cubes were printed before and the green cube printed after. this was in the middle of me starting a flow-calibration.... It lead me down somewhat of a rabbit hole but ehh what to do.