Artillery Genius Firmware 2.0.9. hex file by Tom188

Last crawled date: 4 years, 2 months ago

Since I had some troubles recompiling the firmware for my Artillery Genius.
Here is the hex file already prpared for the Genius.
Also the TFT firmware is changed to the parameters of the Genius.
It's only for manual mesh bed leveling. Please comment for other versions.
Many thanks to digant for your great work!
Use at your own risk!
Preparations:
Install Cura
Put the file of tft on the root of a micro SD card
1.) Open your printer at the bottom (warranty expires!)
2.) Remove the cable of the tft, which is connectet to the main board
3.) Connect your printer to your PC by using USB (no power is needed)
4.) Flash the new firmware with cura
5.) Plug in the tft on the mainboard
6.) Plug in the prepared micro SD card.
7.) Power on your printer
8.) Now the tft should auto update the firmware from the SD card
9.) Done