articulated GREMLIN

Last crawled date: 6 years, 2 months ago

I've always wanted an articulated Gremlin and decided to try making one,
this is it.
I used this excellent model
Gremlin STL
by Hoinz

and I used these joint connectors from
http://www.toyforge.in/products/test-print-kit

I replaced the neck connector with a pin (to save headaches)
and included alternate head and hands files (non articulated ears and fingers)
that should be be easier and faster to print at layer 0.2mm
Use supports when printing,
body parts only need light cleaning, as any small support leftover adds to the scaly look of the Gremlin,
joints need proper clean sanding to snap together

GREMLIN print time broken up:
temp 205 infill 30% layer height 0.2mm speed 45
body 2hr 28 min
arms 1hr 44 min
legs 1hr 28 min
waist and pins 1hr 43 min
GREMLIN with articulated ears print settings:
print time 4 hr 30 min
infill 50% layer height 0.1mm speed 40

GREMLIN articulated hands print settings:
print time 1 hr 48 min
infill 50% layer height 0.06mm speed 20