Thingiverse
Articulated Filament Guide 2020 for Openbeam by Kiolia
by Thingiverse
Last crawled date: 3 years ago
Snap-on arm designed to hold a 6.9-7mm dia x 6 mm long nylon spacer/bushing at just about any angle to provide a very low-friction filament guide. Your choice of ~3cm or ~7cm offset. Fits 2020 Openbeam (not planning to add instances for other openbeam sizes, sorry).
This is my first posted original design! I refined it to print nicely on my AnyCubic Kossel XL, which needs about .30 of spacing between moving parts (right now) for the edges to not fuse together. This makes for some play in the joints, and might make for more play on a better-tuned printer, but I figure play is okay, and it works very well for running filament down from my top-mounted spool through 3 long-arms and one short-arm*.
*5.17.17 update: I ended up printing one more long and one more short over what's shown in the pictures to create a more evenly constrained arc through the 180 degrees down-to-up.
This is my first posted original design! I refined it to print nicely on my AnyCubic Kossel XL, which needs about .30 of spacing between moving parts (right now) for the edges to not fuse together. This makes for some play in the joints, and might make for more play on a better-tuned printer, but I figure play is okay, and it works very well for running filament down from my top-mounted spool through 3 long-arms and one short-arm*.
*5.17.17 update: I ended up printing one more long and one more short over what's shown in the pictures to create a more evenly constrained arc through the 180 degrees down-to-up.
Similar models
thingiverse
free
tcpiii's short filament guide by tcpiii
...and the arm fairly short i hope that once the enclosure shows up it should all fit nicely or i will tweak the design accordingly.
thingiverse
free
Filament Spool - 100% Printed by jrussellsmyth
...s a short and long hub version - depending on your filament holder the long version may be better to keep the arms from catching.
thingiverse
free
Ikea Lack filament guide by grantemsley
...inch drill bit and pop it in.
i've added the fusion 360 design file as well in case anyone wants to make small changes to it.
thingiverse
free
Filament guide by Dangell82
...
i needed a filament guide to go through the top of my ikea lack enclosure. fits a 1/2 inch hole and is about 2 1/2 inches long.
thingiverse
free
2020 Filament Guide by NYC3D
...ied a lot of different filament guides. this one is simple and it works very well on my ft-5
mounts with 10mm m5 or m4 and t-nuts
thingiverse
free
Q&D 2020 frame filament guide by kinsai
...otherwise the guides can develop grooves over time. any similarties to existing filament guides living or dead is strictly...
thingiverse
free
Filament Guide i3 2020 by Marius0188
...filament guide i3 2020 by marius0188
thingiverse
filament guide i designed for my printer with filament roll on the side.
thingiverse
free
IKEA Lack filament guide with bearing
...a lack filament guide first, then through the mk3 filament guide and next to my extruder. this way the filament is never blocked!
thingiverse
free
Another Wanhao i3 Filament Guide by pert
...d thickness of the arm and mount plate to make it a bit stronger so no brace would be needed. printed with 40% fill for rigidity.
thingiverse
free
Profile 2020 filament guide (Cetus 3D) by 0512Nick
...) by 0512nick
thingiverse
this is a very simple object but useful in my case in order not to mess up the cable during the print.
Kiolia
thingiverse
free
2020 OpenBeam Cable Clip by Kiolia
...le clip for 2020 openbeam. there are probably many like it, but this one is mine. it has a slight relief carved out of one end.
thingiverse
free
Silica Container for Top Mount Dry Box by Kiolia
...t should work for spools up to 60mm internal diameter (or just don't stick it in a spool -- that'll work too, of course).
thingiverse
free
Clamp Bar for double 19mm cPAP Tubing by Kiolia
...erse.com/thing:2884959
you'll need zip ties to hold the clamps together.
includes 4 6mm holes for mounting or tying to stuff.
thingiverse
free
Universal Adjustable Belt Tensioner by Kiolia
... hand while pulling on the zip tie with the other.
sized for 6mm belts, but can easily be scaled as needed for other belt widths.
thingiverse
free
Kossel 2020 Corner Reinforcement by Kiolia
...e: https://www.thingiverse.com/thing:2941886
10/24/18 note: and spreader arms for that: https://www.thingiverse.com/thing:3173546
thingiverse
free
Bowden Tube Through-Wall Fitting For 12" Round Drybox by Kiolia
...ing. i also had to ream out the holes in the part a little to get a good fit on the tubing, but better too small than too large!
thingiverse
free
Wire Strain Relief for Anycubic Kossel XL Print Head by Kiolia
...be sure i had enough threads engaged since on the anycubic these screws are what hold the hotend into the overall head assembly.
thingiverse
free
Kossel Linear Lower Cover by Kobebrain
...tower reinforcemet easy to remove for corner reinforcement by kiolia ...
thingiverse
free
Retractor / Lift Spring Arms 15-40cm reach by Kiolia
...ook pretty neat compared to a piece of bungee. beefier versions would probably look hella rad as supports for a flying extruder.
Openbeam
thingiverse
free
OpenBeam Extender by akruger
..., or be glued together.
the openbeam was created using the openbeam 1515 extrusion, v2: http://www.thingiverse.com/thing:100960
thingiverse
free
Printable Openbeam by plastic
...printable openbeam by plastic
thingiverse
print openbeam compatible extrusions. 15mmx15mm extrusion with slot for 3mm nut.
thingiverse
free
Openbeam construction clips by Mister_sovereign
...openbeam construction clips by mister_sovereign
thingiverse
openbeam construction clips
thingiverse
free
Right angle for Openbeams by yannrs
...right angle for openbeams by yannrs
thingiverse
a right angle for openbeams.
thingiverse
free
OpenBeam parts in Sketchup by unrepentantgeek
...openbeam parts in sketchup by unrepentantgeek
thingiverse
openbeam parts for sketchup.
thingiverse
free
Openbeam Clip by didierh
...openbeam clip by didierh
thingiverse
small clip to contain cables into the groove.
use on openbeam profile - 15mm wide only.
thingiverse
free
Holder base for OpenBeam by NeFa
...holder base for openbeam by nefa
thingiverse
simple angled arm for use with openbeam.
thingiverse
free
NEMA17 support for openbeam by Fey
...nema17 support for openbeam by fey
thingiverse
support for nema 17 motor openbeam 15x15mm bars
thingiverse
free
Openbeam Breadboard Case by schmiddim
...openbeam breadboard case by schmiddim
thingiverse
attach some wirings on your openbeam constructions with this case.
thingiverse
free
OpenBeam Feet by OpenBeamUSA
...g indentation is also sized correct for a 3m bumpon adhesive feet.
http://blog.openbeamusa.com/2012/05/29/in-depth-openbeam-feet/
Articulated
thingiverse
free
Articulated HSR
...articulated hsr
thingiverse
articulated hsr.
thingiverse
free
Articulating Skeleton
...articulating skeleton thingiverse articulated ...
thingiverse
free
Dental Articulator
...n correct articulation. the bases should be combined with the respective dental arch and connected to the articulator with a pin.
thingiverse
free
Articulated Shark
...articulated shark
thingiverse
this is my first articulated creation and i am really proud of it
thingiverse
free
Articulation by Shira
...lation by shira
thingiverse
this is an example of articulation that i use in my 3d printing designs.https://youtu.be/hbcawhmfsig
thingiverse
free
articulated robot by seb59
...articulated robot by seb59
thingiverse
a articuled robot
thingiverse
free
Parasol articulation by 3DPhilou
...parasol articulation by 3dphilou
thingiverse
parasol articulation
thingiverse
free
Dental Articulator by wundel
...dental articulator by wundel
thingiverse
dental articulator. enjoy
thingiverse
free
Articulated Mic Holder
...articulated mic holder
thingiverse
articulated mic holder
thingiverse
free
Articulated knife by Devman17
...articulated knife by devman17
thingiverse
knife with an articulated blade.
2020
thingiverse
free
2020
...2020
thingiverse
2020
thingiverse
free
2020
...2020
thingiverse
2020
thingiverse
free
2020
...2020
thingiverse
2020
thingiverse
free
Viken 2020
...viken 2020
thingiverse
viken 2020
thingiverse
free
2020 Gimbal
...2020 gimbal
thingiverse
2020 gimbal
thingiverse
free
2020 Bowl
...2020 bowl
thingiverse
2020 bowl
thingiverse
free
2020 Gyroid
...2020 gyroid
thingiverse
2020 gyroid
thingiverse
free
Trump 2020
...trump 2020
thingiverse
trump 2020
thingiverse
free
Rat 2020
...rat 2020
thingiverse
rat 2020
thingiverse
free
2020 lm8uu
...2020 lm8uu
thingiverse
lm8uu 2020 bosch
Guide
thingiverse
free
Filament guide (Guide-Fil) by phobosmoon
... by phobosmoon
thingiverse
another filament guide, with cap.
put some double-sided tape under the guide to fix it on your table.
thingiverse
free
Wide Guide and Single Guide by norrillous
...needed some single guides also. i found the ikea lack filament guide by karnschi so i added them in to .stl file as well... enjoy
thingiverse
free
diabolo guide
...diabolo guide
thingiverse
diabolo guide for r6 2011
thingiverse
free
Filament guide
...rse
this filament guide is to be used with the spare roller guide when you replaced the plastic extruder with the aluminum one.
thingiverse
free
Filament Guide Tube Guide by Mrrocketman
...e (e.g. bowden cable) on your prusa.
you can purchase the guide here: http://www.mcmaster.com/#8547k23
i recommend a 2ft length.
thingiverse
free
Wire guide for extruded aluminum and filament guide by Todd_Optional
...ilament guide by todd_optional
thingiverse
this is a wire guide and wire guide with filament guide for 20x40 extruded aluminum.
thingiverse
free
PTFE Guide
...piece of ptfe tube in (od of ~4.1mm) to guide filament to the direct drive.
without it the filament spool was unraveling spaghet.
thingiverse
free
FILAMENT GUIDE
...ww.thingiverse.com/thing:3184808
to be used with: ender 3 filament guide by mattellisonhttps://www.thingiverse.com/thing:3059604
thingiverse
free
Guide porte, door guide by vieen3d
...guide porte, door guide by vieen3d
thingiverse
pièce pour guider une porte coulissante
thingiverse
free
Lower Guide for Truvativ X-Guide Chain Guide by jordandandersen
...ntial part.
tested using makerbot thing-o-matic using abs plastic.
fork it on github: https://github.com/servetus/lowerguide
Filament
thingiverse
free
Filament holder for 1,75mm filament by Boschlike
...ent holder for 1,75mm filament by boschlike
thingiverse
filament holder for 1,75mm filament.
mountable on the prusa mk3s+ frame.
thingiverse
free
Filament Holder SUNLU Filament by TrisiT
...filament holder sunlu filament by trisit
thingiverse
remix for the sunlu filament rolls.
thingiverse
free
Filament stand
...filament stand
thingiverse
basic filament stand for filament coils with bigger diameter.
thingiverse
free
Filament Holder
...filament holder
thingiverse
this filament stand is to hold the filament without using the as-built location
thingiverse
free
Filament clip
... clip
really easy to print and use. no hole to insert the filament. the filament stay in place because pressed against the spool.
thingiverse
free
Filament hanger
...filament hanger
thingiverse
hanger for filaments. it helps you organize your filaments and work space.
thingiverse
free
filament holder
...filament holder
thingiverse
filament holder
thingiverse
free
Filament Cradle
...filament cradle
thingiverse
filament cradle
thingiverse
free
Filament Holder (Filament Spool) by herenkeskin
...filament holder (filament spool) by herenkeskin
thingiverse
this is a filament holder. i printed this part on my tevo tarantula.
thingiverse
free
Pyramid Filament Mount with Filament Sensor by wlbillmartin
...pyramid filament mount with filament sensor by wlbillmartin
thingiverse
pyramid filament mount with filament sensor
(9:30)