Arduino Uno R3 Case by Proxy303

Last crawled date: 3 years, 5 months ago

A case for the Arduino Uno R3. I'm not sure if it will work for other Uno models or other Arduino boards.
This case includes holes for the Arduino's two plugs, holes for wires going to the I/O pins, a vent on the top and bottom to prevent overheating, and riser pins to allow airflow. The lid has tabs and an arrow to indicate which way it goes on the box. No need to indicate which way the Arduino goes in, because it's pretty obvious. Plus, the Arduino wouldn't fit into the box otherwise anyways.
There are 3 files:
"Arduino Case Top" is only the lid of the box. It has two tabs that fit into grooves in the bottom part, and a small arrow to indicate which direction the lid goes on. It has rectangular holes for wires going to the Arduino pins, as well as a vent so that the Arduino doesn't overheat.
"Arduino Case Bottom" is only the bottom part of the box. It has two grooves for the two plugs (USB and barrel plug) that stick out of the Arduino, and for the tabs on the top. It also has a vent in the bottom, so that the Arduino doesn't overheat.
"Arduino Case Full" includes both sections of the box, and each section is identical to the individual files.
This is free to use. Feel free to remix this, just be sure to credit me.