Thingiverse
Arduino Uno and Raspberry Pi Mount by mcfada
by Thingiverse
Last crawled date: 4 years, 2 months ago
This Thing is a 3D printed standoff or mount that is designed to hold an Arduino Uno R3 and a Raspberry Pi 3 Model B in the same fixture.
It is designed to attach to pegboard with 1 inch spaced holes using cable ties, but the holes can also be used to attach to something else with your own hardware.
The part has nut traps to fit M3 nuts with M3x12 bolts (4 for the Arduino and 3 for the RasPi).
It is designed to attach to pegboard with 1 inch spaced holes using cable ties, but the holes can also be used to attach to something else with your own hardware.
The part has nut traps to fit M3 nuts with M3x12 bolts (4 for the Arduino and 3 for the RasPi).