Thingiverse
Arduino Nano 33 BLE - Debug Port Pin Fixture
by Thingiverse
Last crawled date: 4 years, 2 months ago
Need to quickly connect to the debug port of the Arduino Nano 33 Sense/BLE?
I wanted to replace the arduino bootloader that comes with the Nano 33 Sense with the Adafruit version (https://github.com/adafruit/Adafruit_nRF52_Bootloader/releases) Also, I did not want to permanently solder wires to those 5 tiny pads at the bottom of the board. So what to do? I designed this machin-thingy in Freecad and now you can use it too.
3D-Print this fixture. Takes less than 10mn on my slow MP Select Mini (see gcode)
Use 0.5mm drill to carefully make all 9 holes slightly bigger.
Push some header pins through. It's going to be a tight fit.
Solder some wire to the pins. Make sure not to keep the soldering iron on the pins for to long. you might melt the plastic around the pins and mess up the alignment to the pads
Align the fixture to the Nano PCB. Four holes are added to hold the fixture in alignment by using pins TX/RX and VIN/GND of the board.
Push fixture down until all the pins are in contact with the pads at the bottom of the PCB.
Connect the other end of the wires to your favourite debugger (J-Link or Black Magic Probe)
Program and enjoy! :)
I wanted to replace the arduino bootloader that comes with the Nano 33 Sense with the Adafruit version (https://github.com/adafruit/Adafruit_nRF52_Bootloader/releases) Also, I did not want to permanently solder wires to those 5 tiny pads at the bottom of the board. So what to do? I designed this machin-thingy in Freecad and now you can use it too.
3D-Print this fixture. Takes less than 10mn on my slow MP Select Mini (see gcode)
Use 0.5mm drill to carefully make all 9 holes slightly bigger.
Push some header pins through. It's going to be a tight fit.
Solder some wire to the pins. Make sure not to keep the soldering iron on the pins for to long. you might melt the plastic around the pins and mess up the alignment to the pads
Align the fixture to the Nano PCB. Four holes are added to hold the fixture in alignment by using pins TX/RX and VIN/GND of the board.
Push fixture down until all the pins are in contact with the pads at the bottom of the PCB.
Connect the other end of the wires to your favourite debugger (J-Link or Black Magic Probe)
Program and enjoy! :)
Similar models
sketchfab
$15
Arduino Nano 33 BLE SENSE
...hardware references that you want to see in sketchfab - arduino nano 33 ble sense - buy royalty free 3d model by f2a (@fa_sketch)
grabcad
free
Arduino Nano 33 BLE Enclosure v1.2 'Domino Box'
...ard' leds, switches etc.
thanks to daves_mestrinho for his nano board drawing and tobias mattsson for his micro usb drawing.
thingiverse
free
Arduino Nano 33 BLE sense box by cjake
...arduino nano 33 ble sense box by cjake
thingiverse
grabcad
free
Arduino Nano 33 BLE Enclosure
...arduino nano 33 ble enclosure
grabcad
enclosure to house arduino nano 33 ble.
thingiverse
free
NanUno
...library https://github.com/sensirion/arduino-ess
works only for nano with stacking headers. see remix for v2.
etch. solder. done.
grabcad
free
ALTIMETER DATALOGGER WITH DISPLAY.
...ered the bmp280 sensor and i2c to 16x2 display converter to a pre-made pcb for an arduino uno and coded it using the arduino ide.
thingiverse
free
JTAG flashing Jig for ARDUINO NANO 33 BLE SENSE by redlukas
...'ll need to remove the plasic bits from the pins to get them trough the holes and then reattach them once they're trough.
thingiverse
free
Nano 33 Sense Digiadapter for DJI Goggles by CodeGrue
...one wire connecting the headset to the radio. so there are two versions of the model, one with a headphone hole, and one without.
thingiverse
free
Arduino BLE 33 Sense Base Plate
...arduino ble 33 sense base plate
thingiverse
arduino ble 33 sense base plate
designed by reinhold radszuweit
gcode for prusa mk3s
grabcad
free
Base Arduino Nano
...se arduino nano
grabcad
multipurpose box for arduino nano projects. posts for prototype pcb board that nano can be soldered to.
Ble
3ddd
$1
Tap Laveo Alea BLE 622D
... laveo , alea
sink tap "laveo", model alea ble 622d
3d_export
$65
Table t518b 3D Model
...table t518b 3d model
3dexport
ble t518b
table t518b 3d model modelix 59515 3dexport
3d_export
$65
Table t507a 3D Model
...table t507a 3d model
3dexport
ble t507a
table t507a 3d model modelix 59490 3dexport
3d_ocean
$9
Cosplay Hoof for 3D Print
...package contains .stl file and original low-poly model in .ble.. ...
3d_ocean
$2
Holden Logo
...i used an hdri image which is not included. format:(.obj)/(.ble.. ...
3d_ocean
$25
Eurocopter Colibri EC-120B helicopter
...2.76 version.renderings in my image previews were created with ble.. ...
3ddd
free
Lampe DINO Coco & Co
...intelligent de passe fil permet de camoufler partiellement son câble ...
3d_sky
free
Ble Station VIVI4
...ble station vivi4
3dsky
ble station vivi4
thingiverse
free
BLE Claw by adafruit
...swcxfk3fib4
guide: https://learn.adafruit.com/ble-claw
build a ble controlled servo claw using the circuit playground bluefruit!
thingiverse
free
Flora BLE Smartwatch by austinn
...flora ble smartwatch by austinn
thingiverse
https://hackaday.io/project/20693-flora-ble-smartwatch
Debug
3d_export
$20
one-to-two automatic mask production line complete drawing
...mechanism , the space is wide and easy to debug and the operation is more...
3d_export
$46
four generation flat mask machine with two in one
...face mask machine one to two (the first generation debuging and improved version) uncoiler adopts the traditional layout structure...
3d_export
$40
90 cam quick transplanting manipulator 12 models in total
...failure rate, long-term stable operation 3. compact mechanism, simple debuging 4. convenient installation and modular design 5. high...
3d_export
$40
hsp-ae series quick cam manipulator picking manipulator 12 specifications
...failure rate, long-term stable operation 3. compact mechanism, simple debuging 4. convenient installation and modular design 5. high...
3d_export
$5
automatic test equipment for mobile phone usb charger
...month for the device from design to processing and debuging. now it can be stably produced. in the charger...
3d_export
$17
welding jig for welding of instrument frame welding beam
...station fixture, work piece and welding, and assemble and debug the workstation in virtual environment, and find out whether...
3d_export
$7
wire and wire copper axis fpc adhesive tape laser cutting peeling cutting machine - final assembly
...adopted, which is very convenient in the installation and debuging, and the circular belt is relatively wear-resistant, and it...
thingiverse
free
"A Debug" by uumeran
...
i gave it to my coworker at our next meeting, and we all had a good laugh about it. she still keeps it at her desk on display.
thingiverse
free
Love-to-Code Debug Shoe by xobs
...d, insert some wires, and get the same benefits of a test jig without needing to build one yourself, or carry it around with you!
thingiverse
free
Debug e27 lamp box with button (for power supply debug, AT, ATX) by ZhenyaKa
....
4 винтика м3 0.6-1мм
и немножко проводов.
если вы не знаете, как соединять лампочку и провода, данная коробочка вам не нужна :)
Nano
3d_export
$20
nano astronaut
...nano astronaut
3dexport
turbosquid
$29
robot nano
...bosquid
royalty free 3d model robot nano for download as 3ds on turbosquid: 3d models for games, architecture, videos. (1658714)
3ddd
free
iPod nano 4G
... nano 4g
3ddd
ipod , apple , плеер
ipod nano 4g
3d_export
$6
Nano Katana
...nano katana
3dexport
3ddd
free
iPod Nano
...ipod nano
3ddd
apple , плеер
d
turbosquid
$80
NANO CAR
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
nano house
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$18
nano house
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
Ipod nano
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
iPod nano 6
...ipod nano 6
3ddd
apple , плеер
модель ipod nano 6, моделировался по чертежу.
33
design_connected
$16
S 33
...s 33
designconnected
thonet s 33 computer generated 3d model. designed by stam, mart.
3ddd
free
Bed 33
...bed 33
3ddd
постельное белье
bed 33.i hope you like it.thank you!
design_connected
$27
Docks 33
...docks 33
designconnected
gandia blasco docks 33 computer generated 3d model. designed by romero vallejo.
design_connected
$16
Gray 33
...gray 33
designconnected
gervasoni gray 33 dining tables computer generated 3d model. designed by paola navone.
turbosquid
$32
Apartment 33
...rbosquid
royalty free 3d model apartment 33 for download as on turbosquid: 3d models for games, architecture, videos. (1431477)
turbosquid
$35
Bracelet 33
...osquid
royalty free 3d model bracelet 33 for download as 3dm on turbosquid: 3d models for games, architecture, videos. (1548227)
turbosquid
$10
building 33
...osquid
royalty free 3d model building 33 for download as max on turbosquid: 3d models for games, architecture, videos. (1362691)
turbosquid
$6
Bedcloth 33
...osquid
royalty free 3d model bedcloth 33 for download as max on turbosquid: 3d models for games, architecture, videos. (1522754)
turbosquid
$25
sIG 33
...uid
royalty free 3d model sig 33 for download as fbx and obj on turbosquid: 3d models for games, architecture, videos. (1540280)
turbosquid
$20
Curtains 33
...royalty free 3d model curtains 33 for download as max and obj on turbosquid: 3d models for games, architecture, videos. (1334166)
Arduino
turbosquid
$7
Arduino
...turbosquid
royalty free 3d model arduino for download as max on turbosquid: 3d models for games, architecture, videos. (1197165)
turbosquid
$3
Arduino
...turbosquid
royalty free 3d model arduino for download as c4d on turbosquid: 3d models for games, architecture, videos. (1305484)
3d_export
$5
arduino satellite
...rt
this model is the exact arduino based satellite model with some basic sensors and camera modules and also includes batteries.
turbosquid
$1
Arduino UNO
...alty free 3d model arduino uno for download as , stl, and wrl on turbosquid: 3d models for games, architecture, videos. (1515932)
3d_export
$5
esp8266 box arduino
...esp8266 box arduino
3dexport
box for esp8266 module with wire hole. inside dimensions: 49x26 mm. height 15 mm.
3d_export
$60
Arduino Uno Rev3 Microcontroller 3D Model
...mega328p circuit board spark cable wire 5v 74v 9v 111v
arduino uno rev3 microcontroller 3d model danielgarnier4403 97237 3dexport
3d_export
free
arduino rover kit
...no!!! materials: no!!! rigged: no animated: no uv mapped: no it is not an exact copy of the original! not subject to 3d printing!
3d_ocean
$7
The housing for the 3d Printer
...the housing for the 3d printer 3docean arduino device housing stl the housing consists of two portions:...
3d_export
$5
arm 4 axis
...uno -4 servo motor 180° -3 joystick (x,y) for arduino -mdf wood -some wires -cnc laser cut...
3d_export
$5
solar tracker
...machine for the frame . list of material : -arduino uno -2 step motor with driver -4 ldr sensor...
Fixture
turbosquid
$5
Fixture
...turbosquid
royalty free 3d model fixture for download as max on turbosquid: 3d models for games, architecture, videos. (1160462)
turbosquid
$39
FIXTURE
...id
royalty free 3d model fixture for download as ige and obj on turbosquid: 3d models for games, architecture, videos. (1332983)
turbosquid
$2
Fixture
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
fixture
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
fixture
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$10
ROBOT FIXTURE
...fixture
3dexport
it is a robot fixture. it is used to pick the insert from the table and place that insert into the mold cavity.
turbosquid
free
lighting fixtures
...odel lighting fixtures for download as 3ds, max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1428616)
3d_ocean
$2
Light Fixture 02
...reat for any game enviroment. the light fixture has texture with both lid bulb, and unlid bulb. low poly (238 polygons – 245 v...
turbosquid
$29
bathroom fixtures
...odel bathroom fixtures for download as 3ds, max, obj, and c4d on turbosquid: 3d models for games, architecture, videos. (1180328)
turbosquid
$20
Wall Fixture
... 3d model wall fixture for download as 3ds, obj, c4d, and fbx on turbosquid: 3d models for games, architecture, videos. (1270353)
Port
3ddd
$1
lualdi porte
...lualdi porte
3ddd
lualdi porte , дверь
двери фабрики lualdi porte
turbosquid
free
port
...
turbosquid
royalty free 3d model port for download as blend on turbosquid: 3d models for games, architecture, videos. (1447959)
3d_export
$65
port
...port
3dexport
3d_export
$65
port
...port
3dexport
simple rendering of the scene file
3d_export
$65
port
...port
3dexport
simple rendering of the scene file
3d_export
$65
port
...port
3dexport
simple rendering of the scene file
3d_export
$65
port
...port
3dexport
simple rendering of the scene file
3d_export
$65
port
...port
3dexport
simple rendering of the scene file
3d_export
$65
port
...port
3dexport
simple rendering of the scene file
3d_export
$65
port
...port
3dexport
simple rendering of the scene file
Pin
3d_export
$5
Pin
...pin
3dexport
very god pin
3d_ocean
$1
Bowling pins
...e inside of cinema 4d. there are 3 files included : pin.c4d : pins array.c4d : pin.obj pins array is the bowling pins set up i...
3d_ocean
$5
Pins
...v-ray studio render setting ready close-ups camera support polys: low: 6.314 high: 1.681.922 (with turbosmooth modifier) *incl...
turbosquid
$4
pin
...osquid
royalty free 3d model pin for download as 3dm and max on turbosquid: 3d models for games, architecture, videos. (1669685)
3d_ocean
$15
Map Pins
...map pins
3docean
factory kremlin map moscow oil oil-derrick pin pins red russia soviet soviet union star
some stylized map pins.
turbosquid
$9
Pins
...lty free 3d model pins for download as 3ds, max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1506195)
turbosquid
$7
Pin
...alty free 3d model pin for download as dae, fbx, obj, and stl on turbosquid: 3d models for games, architecture, videos. (1609891)
turbosquid
$35
Pins
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Pin
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Pin
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.