Arduino Micro

Last crawled date: 2 years ago

Arduino Micro - YET another Arduino board! But this one came easily after the pro-micro :)

Basically its an Arduino Leonardo shrunk, unfortunately it would need a 30 pin DIL socket. BUT there is quite a lot packed on to the board so it must be the most powerful of the teeny boards.

As with the Pro-Micro. I used the EAGLE files for the PCB, and datasheets for components, reverting to measuring and checking vs a real board only when necessary. Big claim, but it should be correct to within at least 0.1mm. It's open source though and I saw there is an extra resistor on the underside of he board layout that's not on my genuine Arduino/Adafruit unit

So for a full set :
UNO:
https://grabcad.com/library/arduino-uno-r3-1
Mega:
https://grabcad.com/library/arduino-mega-2560-1
Nano:
https://grabcad.com/library/arduino-nano--1
Pro-Micro:
https://grabcad.com/library/arduino-pro-micro-1

Please hit the "like" button if you do and thanks for all the comments