Thingiverse
Arduino and Xbee Remote Control Cases by TGit-Tech
by Thingiverse
Last crawled date: 4 years, 7 months ago
These two cases were designed for a remote control implementation of an irrigation pump.
These cases can be used for other Xbee remote control needs by carrying the Hand-Remote which remotely controls the "Pump-Controller" Cases I/O Pins which doesn't necessarily need to be controlling a "Pump".
The Hand-Remote case fits -
Arduino Uno
XBee Shield and Xbee with RP-SMA External Antenna
LCD Keypad Shield
Buttons to the LCD Keypads
On/Off Toggle Switch
Place to keep a 9Vdc Battery for Remote Power
The "Pump-Controller" case fits -
Arduino Uno
XBee Shield and Xbee with an RP-SMA External Antenna
A Perfboard with I/O screw terminals.
A LM2596 DIY Buck Power Converter ( If needed )
To see how the boards fit into the cases see /docs/AgIrrigationPumpRemoteControl.pdf document at https://github.com/tgit23/AgIrrigationRemoteControl
These cases can be used for other Xbee remote control needs by carrying the Hand-Remote which remotely controls the "Pump-Controller" Cases I/O Pins which doesn't necessarily need to be controlling a "Pump".
The Hand-Remote case fits -
Arduino Uno
XBee Shield and Xbee with RP-SMA External Antenna
LCD Keypad Shield
Buttons to the LCD Keypads
On/Off Toggle Switch
Place to keep a 9Vdc Battery for Remote Power
The "Pump-Controller" case fits -
Arduino Uno
XBee Shield and Xbee with an RP-SMA External Antenna
A Perfboard with I/O screw terminals.
A LM2596 DIY Buck Power Converter ( If needed )
To see how the boards fit into the cases see /docs/AgIrrigationPumpRemoteControl.pdf document at https://github.com/tgit23/AgIrrigationRemoteControl