Thingiverse
Arducam Hanger for Qidi Tech 1/FFCP by malakid
by Thingiverse
Last crawled date: 3 years, 5 months ago
This is a camera hanger for the Arducam 5 Megapixels OV5647 camera. It places the camera in the center of the printer at eye level. This is a remix of two other projects for the Qidi Tech 1.
https://www.thingiverse.com/thing:1958886https://www.thingiverse.com/thing:1763679
From nanostructure I borrowed the hanger and heavily modified it so it has a mounting hole and is the correct length for the Arducam 5 Megapixels OV5647 camera.
From dewhisna I borrowed the Arducam casing which was also heavily modified to include nanostructures camera hanger mounting holes.
I used M2 screws and nuts to put this together, but you can use whatever you like.
https://www.thingiverse.com/thing:1958886https://www.thingiverse.com/thing:1763679
From nanostructure I borrowed the hanger and heavily modified it so it has a mounting hole and is the correct length for the Arducam 5 Megapixels OV5647 camera.
From dewhisna I borrowed the Arducam casing which was also heavily modified to include nanostructures camera hanger mounting holes.
I used M2 screws and nuts to put this together, but you can use whatever you like.
Similar models
grabcad
free
Arducam OV5647 Base
...arducam ov5647 base
grabcad
this is a base to mount the arducam ov5647 camera. the five (5) are 1/4-20 holes need to be taped.
thingiverse
free
Ender 3 Clip on Cam Mount
...ngiverse
this is a clip on camera mount for the ender 3 using arducam 5 megapixels 1080p sensor ov5647 mini camera video module.
thingiverse
free
ArduCam with GoPro Mounting and Flexible Arm by BrendanP52
...ized ring
-locking ring, qty: as many as you want
-m3 x 15mm screws, qty: 4. these hold together the front and back of the case..
thingiverse
free
Raspberry Pi2 Qidi Tech 1 Mount by Brizzle
...ecause that's where i want to mount my pi cam using this design http://www.thingiverse.com/thing:1667505 and a 12inch ribbon.
thingiverse
free
Blink Camera Qidi Mount by dakahler
...m3. i recommend gluing them together as well.
model for the blink mount comes from here: http://www.thingiverse.com/thing:2098673
grabcad
free
Arducam Wrist Camera Housing
...arducam wrist camera housing
grabcad
wrist camera housing for widowx 250. for use with arducam ov5647 module.
thingiverse
free
Raspberry Pi Camera Mount OV5647 for 2020 Extrusions
...trusion mount from the original thing. i made the notch of the the camera holder bigger so ov5647 cameras with bigger lenses fit.
thingiverse
free
Modified Pi Camera Hanger for Qidi Tech 1 by malakid
...te from the angle you hold your head when your neck hurts the worst! :) watch the build from the comfort of your computer screen.
grabcad
free
Arducam OV5647 2020 Mount
...t
grabcad
mount for arducam raspberry pi camera on 2020 aluminum extrusion.
use 6x m3x8, 2x m5x8 machine screws and 2x m5 t-nuts
thingiverse
free
Raspberry Pi camera mount for QIDI Tech I by jkristofr
...infill. worked well.
fyi - when you mount it, you have to push it up from the bottom a little bit in order to get it to clip in.
Malakid
thingiverse
free
Joy Keychain by malakid
...joy keychain by malakid
thingiverse
another remix, another keychain
thingiverse
free
Hanna Keychain by malakid
...hanna keychain by malakid
thingiverse
another keychain and another remix of kpng's mahalo fridge magnet.
thingiverse
free
Longer Handle for Stanley Blades by malakid
...longer handle for stanley blades by malakid
thingiverse
a longer handle for people with big hands.
thingiverse
free
Freightliner Keychain by malakid
...hingiverse
i really like riccardo3d's original design, but i wanted to retain the freightliner logo's distinctive shape.
thingiverse
free
Hanna Keychain V2 by malakid
...nna keychain for another hanna.
if you want to print it in three colors like this, pause and change filament at 6.1mm and 8.41mm.
thingiverse
free
Smoking is Healthier Than Fascism by malakid
...lthier than fascism by malakid
thingiverse
take it from dr. "bob" dobbs, geniuses - smoking is healthier than fascism.
thingiverse
free
Whatever emoji v.2 by malakid
...atever emoji v.2 by malakid
thingiverse
whatever dude! ¯\(ツ)/¯
v.2 created using https://image.online-convert.com/convert-to-svg
thingiverse
free
VW Skull Keychain by malakid
...ychain and happyhomer's shepherd zipper-pendant. made for someone with a vw gti. the filament is proto-pasta iron filled pla.
thingiverse
free
SparkPilots Logo by malakid
...ered to add:
print background in the color of your choice.
pause at 2.1mm and change to black.
pause at 4.1mm and change to blue.
thingiverse
free
Hooks for Bird Temple by malakid
...ooks to specifically fit over a small tree branch and over the ring on the bird temple.
https://www.thingiverse.com/thing:2852328
Arducam
thingiverse
free
arducam 2020 mount by toklaa
...arducam 2020 mount by toklaa
thingiverse
2020 mount for arducam
thingiverse
free
ArduCam Basic Stand by thingiturtle
...arducam basic stand by thingiturtle
thingiverse
i needed a very basic stand to hold my arducam for time lapse videos.
thingiverse
free
Arducam IMX477 casing by DaviiD1984
... a side is printed from tpu and intended for getting cables for multi sensor sync out of the enclosure.
a m3-.50 nut is required.
thingiverse
free
Arducam Mount
...s from the back of inside of the pillar and designed the bracket to the proper thickness so the screws were flush when tightened.
thingiverse
free
Creality CR6 SE ArduCam mount by ShamanRawb
...reality cr6 se arducam mount to go with the case taken from https://www.thingiverse.com/thing:3950698/files
case is included too.
thingiverse
free
Anycubic Mega X ArduCam Mount by ShamanRawb
... mount.stl"
it will also (theoretically) mount his raspberry pi case to the back of it. i haven't tested that mount yet.
thingiverse
free
Arducam Night Vision Cam by Ali229
...from the original thing.
camera:https://www.amazon.com/gp/product/b0829hz3q7/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=utf8&psc=1
thingiverse
free
Arducam IMX219 USB2.0 Mount by MrJfry
...w and one m3x20mm screw and 2 m3 nuts.
for the cam you need 4 m2.5x12mm screws.
it can be fixed with a m5 screw through the foot.
thingiverse
free
Arducam Mount Adapter: Prusa MK3S by leorayjes
...there are 4 holes but i just kitty cornered mine and secured the base with an m3 x 16 and m3 nut.
infill: 15-20%
layer height: .2
thingiverse
free
Ender 5 rail clip for Arducam
...l hold the 40-pin ribbon cable in place. you could also use the stl as a building block to mount pretty much anything to the rail
Ffcp
thingiverse
free
FFCP Stepstick cooling tunnel by etet100
...ffcp stepstick cooling tunnel by etet100
thingiverse
ffcp (mightyboard) stepsticks cooling tunnel.
thingiverse
free
FFCP-Touchscreen-Mount
...touchscreen. information about my build can be found here:
https://fraggin-right-github.gitbook.io/ffcp-klipper-dwc-touchscreen/
thingiverse
free
FFCP GoPro Adapter by mianzel
...cp to record your prints, it was design on fusion 360 and can be use with the door open or close.it uses the two screws on front.
thingiverse
free
FFCP filament guide by grimblgrombl
...fcp filament guide. it's designed so that the tubes end in the middle of the "filament spool width". it works good.
thingiverse
free
FFCP DUCT by natewin
... screw hole to be a bit stronger as a 3d printed part.
if you've broken yours this should get you very close to the original.
thingiverse
free
FFCP GoPro compatible mount by kashhatton
... platform.
instead of a gopro, i use a logitech c525 webcam using the mount found here: https://www.thingiverse.com/thing:1554378
thingiverse
free
FFCP camera mount by sparlez
...ffcp camera mount by sparlez
thingiverse
another camera mount. hope it helps someone.
thingiverse
free
Door Holder Opener For FFCP by caseygr
...door holder opener for ffcp by caseygr
thingiverse
hold door open while heat hood is on
thingiverse
free
Rear Face of FFCP V1 top cover by gromo
...by gromo
thingiverse
hi
i draw this rear face of the top cover of my ffcp v1
i used a cnc to make it (online stl to dwg)
thierry
thingiverse
free
Ultra simple spool holder for FFCP (flashforge creator pro) by ben8p
...you to add a piece of pvc pipe and an m10 bold
see: http://www.instructables.com/id/spool-holder-for-flashforge-creator-pro-ffcp/
Qidi
thingiverse
free
Qidi XMAX Spool Clamp
...qidi xmax spool clamp
thingiverse
a simple spool clamp for qidi tech xmax or xplus spool holder(30mm diameter).
thingiverse
free
QIDI Upper spool holder by Shibatam
...qidi upper spool holder by shibatam
thingiverse
upper spool holder for qidi.
use this when the back space is narrow.
thingiverse
free
Qidi Z axis brace by mjgrundmann
...qidi z axis brace by mjgrundmann
thingiverse
used to stiffen up the z axis guide rods on a qidi tech i.
thingiverse
free
DEROULEUR BOBINE QIDI by bil26
...i by bil26
thingiverse
bonjour,
c'est un montage pour imprimante qidi xmax .
montage avec 2 x roulements 6002.
cordialement,
thingiverse
free
QIDI Glass Bed Clips by ChrisX35
...idi glass bed clips by chrisx35
thingiverse
qidi glass bed upgrade.
new clips are here https://www.thingiverse.com/thing:2480107
thingiverse
free
Bed level QIDI - Microsoft LifeCam by lemacs
...bed level qidi - microsoft lifecam by lemacs
thingiverse
bed level camera mount for qidi - microsoft lifecam
thingiverse
free
Qidi X-One cooler duct by rpagyc
...qidi x-one cooler duct by rpagyc
thingiverse
extruder cooling duct for the qidi tech x-one
thingiverse
free
Qidi Tech PTFE adapter by sewallman
...h ptfe adapter by sewallman
thingiverse
adapter for a 6mm ptfe tube to fit ontop the qidi tech xmax/xplus/imates extruder cover.
thingiverse
free
QIDI Shadow filter plug by shifter
... by shifter
thingiverse
this is a cap/plug for the qidi tech shadow 5.5s. to cover the spot where the pointless air filter goes.
thingiverse
free
QIDI Door Latch by TobyC84
...i created for the qidi printer. it holds the door open while you print pla or while you remove a print from the print bed! enjoy!
Tech
design_connected
$13
Tech
...tech
designconnected
alivar tech computer generated 3d model. designed by scandola, matteo.
design_connected
$16
Hi Tech
...hi tech
designconnected
living divani hi tech computer generated 3d model. designed by lissoni, piero.
3d_ocean
$15
Tech Light
...diomax 9 or above includes the .3ds and .obj files includes maps other features to note: the main light is grouped and the piv...
turbosquid
$60
Tech Commander
...uid
royalty free 3d model tech commander for download as fbx on turbosquid: 3d models for games, architecture, videos. (1209942)
turbosquid
$3
Tech Heart
...squid
royalty free 3d model tech heart for download as blend on turbosquid: 3d models for games, architecture, videos. (1480511)
3ddd
$1
Кресло Hi-Tech
...кресло hi-tech
3ddd
hi-tech
современное хромированное кресло
3ddd
$1
luster hi tech
...luster hi tech
3ddd
luster hi tech для офиса))
turbosquid
$10
Tech pokeball
...yalty free 3d model tech pokeball for download as obj and fbx on turbosquid: 3d models for games, architecture, videos. (1418339)
3ddd
$1
Стол hi-tech.
...стол hi-tech.
3ddd
стол hi-tech.
материалы, освещение, рендер.
turbosquid
$7
Shisha Tech
...ty free 3d model shisha 3d tech for download as sldas and ige on turbosquid: 3d models for games, architecture, videos. (1670897)
Hanger
3d_export
$5
hanger
...hanger
3dexport
hanger
archibase_planet
free
Hanger
...hanger
archibase planet
hanger coat hanger holder
hanger n260612 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Hanger
...hanger
archibase planet
hanger rack
hanger - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$5
Hanger
...hanger
3dexport
old-fashioned hanger of georgia
3ddd
$1
Hanger
...hanger
3ddd
вешалка
classic black hanger
archibase_planet
free
Hanger
...hanger
archibase planet
hanger hall-stand rack
hanger - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Hanger
...hanger
archibase planet
hanger rack peg
hanger n210712 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Hanger
...hanger
archibase planet
hanger rack sanitary ware
hanger - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Hanger
...hanger
archibase planet
hall-stand rack hanger
hanger n250711 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Hanger
...hanger
archibase planet
hanger hall-stand rack
hanger - 3d model (*.gsm+*.3ds) for interior 3d visualization.
1
turbosquid
$69
armchairs(1)(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
ring 1+1
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
chair(1)(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$8
Chair(1)(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
RING 1(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
Table 1(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
house 1(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$59
Formula 1(1)
...lty free 3d model formula 1 for download as max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1567088)
design_connected
$11
No 1
...no 1
designconnected
sibast no 1 computer generated 3d model. designed by sibast, helge.
turbosquid
$2
desert house(1)(1)
...3d model desert house(1)(1) for download as 3ds, max, and obj on turbosquid: 3d models for games, architecture, videos. (1055095)