Thingiverse
Arcade Power Button Sleeve Adapter
by Thingiverse
Last crawled date: 5 years, 4 months ago
19mm Power Switch adapter sleeve allows mounting a momentary switch within a standard Suzo/Happ Controls 1-1/8" mounting hole. Sleeve adapter accepts the 19mm barrel nut to secure the switch. The outer thread is a standard 1-1/8 -18 pitch UNF thread, which is compatible with Suzo/Happ cabinet button thread nuts.
NOTE: Regarding the nut, if your printer is dialed in and able to print fine details, the threads on the sleeve and nut will mate very well. To loosen the thread fit, scaling up the nut 2%-5% will increase the slop between the two. In addition, make sure no loose stringers of filament or high spots are on the threads. This will obviously effect the function of the thread.
11-27-2019 : Added Happ flange nut
11-27-2019 : Added Flush version of sleeve
NOTE: Regarding the nut, if your printer is dialed in and able to print fine details, the threads on the sleeve and nut will mate very well. To loosen the thread fit, scaling up the nut 2%-5% will increase the slop between the two. In addition, make sure no loose stringers of filament or high spots are on the threads. This will obviously effect the function of the thread.
11-27-2019 : Added Happ flange nut
11-27-2019 : Added Flush version of sleeve