Thingiverse
approximately 4:1 elliptical nosecone for 29mm body tube by etoyoc
by Thingiverse
Last crawled date: 3 years, 1 month ago
This is a 120mm long nosecone (not including coupler).
Coupler is not attached to cone in the print to allow for smaller print height or to attach a bolt for the shock cord. Simply glue into the nose cone once printed.
The coupler has built in attachment points for shock cord or to install bolt for shock cord.
Coupler is not attached to cone in the print to allow for smaller print height or to attach a bolt for the shock cord. Simply glue into the nose cone once printed.
The coupler has built in attachment points for shock cord or to install bolt for shock cord.
Similar models
thingiverse
free
Nosecone with integral Canards by UnknownPro
...s by unknownpro
thingiverse
a bt-50 size nose cone reminiscent of the kraken model (downscaled) with bars to attach a shock cord
thingiverse
free
Model Rocket Nose Cone by CyberNY
...ubes. hole in the bottom allows for a threaded eyelet to be added for the shock cord and parachute. printed on a solidoodle sd3.
thingiverse
free
Ariane Flying Model Rocket by SkyRider
...ose cone does not mesh with the fuselage as well as the static model to allow for ease of removal when the ejection charge fires.
thingiverse
free
Nosecone for 74mm Tube by NathanielWJ
...be, goes with our mechanical parachute deployment system. just tie your shock chords through the holes in the inside of the cone.
thingiverse
free
Stubby 29mm nosecone by etoyoc
...by 29mm nosecone by etoyoc
thingiverse
50mm long (not including coupler) nose cone for 29mm, this is less than a 2:1 elliptical.
thingiverse
free
29mm nose cone by spowers42
...lue the two ends into the nosecone.
*add two part expanding foam to nose cone to fill the rest of the void and secure the kevlar.
thingiverse
free
Customizable Rocket Nose Cone Coupler by artdavis
...hangelog:
2017-05-07: file creation
2017-06-08: added fillet/chamfer feature to bottom of coupler for easier body tube insertion.
thingiverse
free
Model Rocket Nose Cone - BT101 Elliptical by garyacrowellsr
...ntended that the two parts are glued together. the shoulder has an integrated 'pig snout' loop for shock cord attachment.
thingiverse
free
Camera mount for your Helmet by Bluefalcon888
...lued to the printed base
a shock cord is attached to the printed base and the helmet to secure the camera in case of a wipe out
thingiverse
free
Rocket Nosecone v2
...rocket nosecone v2
thingiverse
nose cone with hole
Etoyoc
thingiverse
free
Stubby 29mm nosecone by etoyoc
...by 29mm nosecone by etoyoc
thingiverse
50mm long (not including coupler) nose cone for 29mm, this is less than a 2:1 elliptical.
thingiverse
free
29mm rocket fin can by etoyoc
...29mm rocket fin can by etoyoc
thingiverse
29mm 4 fin can for phenolic body tube with screw on retainer
thingiverse
free
ADHD fidget bearings by etoyoc
... i attached cylinders to the bearing balls to keep them ontrack. the cylinders will slip horizontally, but they will still spin.
thingiverse
free
Whirl & Hurl 24 spinner rocket by etoyoc
...
has flown very well on d12, e9, and e30 motors. it shredded on an f32 motor so it will be improved for higher impulse motors.
thingiverse
free
29mm rocket 3 tube fin fin can by etoyoc
... external part of the screw on motor retainer. this design has successfully flown through an f motor without any problems shown.
thingiverse
free
Spiral fin can for 29mm Phenolic tubing & retainer by etoyoc
...tainer. this design has been launched on an estes e16 without problems. it has not been tested with higher thrust motors, yet.
thingiverse
free
Whirl & Hurl 13mm version by etoyoc
...motor won't come out at ejection.
yes, there is a chance to bind on the launch rod, so make sure it is a smooth, clean rod.
thingiverse
free
Whirl & Hurl 18 by etoyoc
...k for the larger 18mm file. b are ok ok. but still, don't use long delay motors or the motor ejection may be on the ground.
thingiverse
free
24 mm tube fin design for C11, D12, E9, and other 24mm motors by etoyoc
...ost in a corn field so i haven't been able to inspect it for damage. however, the larger 29mm version has held up very well.
Nosecone
thingiverse
free
Nosecone for BT50
...nosecone for bt50
thingiverse
nosecone for modelrockets with a bt50 bodytube.
thingiverse
free
Nosecone by A_Sojourn_In_Time
...nosecone by a_sojourn_in_time
thingiverse
rocket nosecone
largest diameter: .9"
thingiverse
free
Nosecone by 64BFox
...nosecone by 64bfox
thingiverse
this is a simple nosecone design with an additionally reinforced tip, and reinforced body.
thingiverse
free
Rocket Nosecone
...rocket nosecone
thingiverse
made and printed this shortly after loosing my nosecone of my high-flier.
thingiverse
free
Offset Nosecone by vance2loud
...offset nosecone by vance2loud
thingiverse
a rough nosecone for proton style rockets
sized to suit 60mm mailing tubes
thingiverse
free
Rounded Rocket Nosecone by A_Sojourn_In_Time
...rounded rocket nosecone by a_sojourn_in_time
thingiverse
rocket nosecone
largest diameter: .9"
thingiverse
free
Low-Poly Nosecone by A_Sojourn_In_Time
...low-poly nosecone by a_sojourn_in_time
thingiverse
low-poly rocket nosecone
largest diameter: .9"
thingiverse
free
rack rocket nosecone by mollwollfumble
...rack rocket nosecone by mollwollfumble
thingiverse
nosecone for 18 mm motor rack rocket with 5 mm rack rods
thingiverse
free
Rocket Nosecone v2
...rocket nosecone v2
thingiverse
nose cone with hole
thingiverse
free
Rocket Nosecone v1
...rocket nosecone v1
thingiverse
my first version without a hole
Elliptical
thingiverse
free
Elliptical cylinder
...elliptical cylinder
thingiverse
model of an elliptical cylinder in .stl format, ready to be printed with 3d printer.
thingiverse
free
Elliptical Paraboloid by SeanDunphy
...elliptical paraboloid by seandunphy
thingiverse
this is an elliptical paraboloid.
thingiverse
free
Elliptical Cone by SeanDunphy
...elliptical cone by seandunphy
thingiverse
this is an elliptical cone.
thingiverse
free
Clothes rail holder elliptical
...clothes rail holder elliptical
thingiverse
this is a clothes rail holder for elliptical rails.
thingiverse
free
elliptical planetary gears by stickoutrock
...al planetary gears by stickoutrock
thingiverse
five identical modified elliptical gears in a rotational planetary configuration.
thingiverse
free
Elliptical Earrings by jchun444
...elliptical earrings by jchun444
thingiverse
designed for laser cutting.
thingiverse
free
Elliptical Gear - With Knob by SidneyKi
...
a slight remix of cohlwiler's wonderful elliptical gear set.
create the arm to have a knob on it to rotate the gear easier.
thingiverse
free
Elliptic Infinity
...was designed by dr. robert lang (http://langorigami.com). the original uses curved creases, while this is a discretized version.
thingiverse
free
Elliptical Springs
...arious sketches.
https://cad.onshape.com/documents/03052c8bd4ef6aed081dabfd/w/cc21c0833b0e397402dd7ad9/e/21956654c68e90fedfbe5b1c
thingiverse
free
Intertwined 3 (elliptic base) by ToScH
...tic base) by tosch
thingiverse
i changed the base to a elliptic one.
there are also seperate files for a multiple color print.
29Mm
thingiverse
free
Stubby 29mm nosecone by etoyoc
...by 29mm nosecone by etoyoc
thingiverse
50mm long (not including coupler) nose cone for 29mm, this is less than a 2:1 elliptical.
thingiverse
free
Measure Corners 21mm to 29mm by KozzenLee
...measure corners 21mm to 29mm by kozzenlee
thingiverse
measure corners 21mm to 29mm. including cad files.
thingiverse
free
29mm rocket fin can by etoyoc
...29mm rocket fin can by etoyoc
thingiverse
29mm 4 fin can for phenolic body tube with screw on retainer
thingiverse
free
Wrench for Seiko Watch - 29mm by JumpyWizard
...9mm by jumpywizard
thingiverse
this is a wrench for the back panel of my seiko watch. the diameter from notch to notch is 29mm.
thingiverse
free
Solar light spike (D=29mm) by zellkoss
...spike (d=29mm)
feel free to take the .ipt file (inventor) and modify the part.
pique pour lampe solaire jumbo, diamètre 29mm.
thingiverse
free
Clothes rail hanger for 29mm poles by daveb500
...clothes rail hanger for 29mm poles by daveb500
thingiverse
wall bracket for hanging a clothes rail. rail diameter 29mm.
thingiverse
free
29mm 1/2inch Drive Socket by devonfurnell
...29mm 1/2inch drive socket by devonfurnell
thingiverse
29mm, 1/2inch drive socket i modeled for light duty use.
thingiverse
free
soporete pcb 50mm y 29mm by Lord_of_Pino
...soporete pcb 50mm y 29mm by lord_of_pino
thingiverse
soporte pra pcb de 50mm modular y 29mm
https://youtu.be/q4rsjwqv0qk
thingiverse
free
29mm Thrust Ring for Aerotech Composite Motor by pcriminale
...aces paper or tape based thrust rings. 2g extremely strong. works great with aerotech 29mm motors and estes 29mm motor retainers.
thingiverse
free
29mm Estes Rocket Motor Retainer
... cti or at motors.
i designed this retainer specifically for use with the estes star orbiter or vapor (hobby lobby) model rocket.
Approximately
thingiverse
free
Nikon D800 approximate model by mariusimv
...nikon d800 approximate model by mariusimv
thingiverse
nikon d800 approximate model.
i used it to model some camera accessories.
thingiverse
free
A small stellated dodecahedron approximated by dodecahedra. by eduardoviruena
...ecahedron approximated by dodecahedra. by eduardoviruena
thingiverse
a small stellated dodecahedron approximated by dodecahedra.
thingiverse
free
Mauler smoke canisters approximation by JMCmaulerworks
...ingiverse
replacement mauler smoke canisters, approximated from memory
i use a screw underneath to prevent them from falling off
thingiverse
free
Schwarz P surface - approximation by dennedesigns
... together using small magnets. there are two options for the print files, ones with small holes for the magnets and ones without.
thingiverse
free
Oculus Quest 2 with approximate lenses by stevesch
...i printed the model at 30% size.
the touch controllers are not changed from the original thing (i used the higher-res 50k model).
thingiverse
free
Double Integral Approximation by FormulaJockey
...- 1}]]
clear[f, x, y]
f[x, y] := 2*exp[-x^2 - y^2]
print1 = rd[f, {-2, 2.5}, {-2, 2}, 10]
export["filename.stl",print1]
thingiverse
free
OpenSCAD metric thread approximation by tim_caper
...s i always have to finish threads manually because of printing inaccuracies. this works for me but i'd appreciate a feedback.
thingiverse
free
Shell approximation of solid of revolution II by mathgrrl
...ke license. if you want to use designs, images, or files outside of the terms of this license, please email request@mathgrrl.com.
thingiverse
free
Dewalt DCB201-B3 20v 1.5Ah Ion Litio Battery (Approximate volume model) by reflexpnt
...(approximate volume model) by reflexpnt
thingiverse
3d model of approximate volume.
dewalt_dcb201-b3_20v_1.5ah_ion_litio_battery
thingiverse
free
5535 Annefrank approximate shape scaled one in eighty thousand
...atlab r2016a.
the file's names explained: name_1_x_10_y.stl is 1 : x * 10y. so _1_6_10_7 is 1:600000000 or one in 60 million.
Body
thingiverse
free
BODY by nagato
...body by nagato
thingiverse
body
thingiverse
free
Feminine body
...feminine body
thingiverse
body make in zbrush
thingiverse
free
Body by michaelodonnell500
...body by michaelodonnell500
thingiverse
main body of the robot
thingiverse
free
Ultramarine Body
...ultramarine body
thingiverse
just a quick ultramarine remix from leprosywins great emoji soldiers (body)
thingiverse
free
Body for a robot by OverCraft
...body for a robot by overcraft
thingiverse
body
thingiverse
free
Drone Body by lowenski
...drone body by lowenski
thingiverse
drone body
thingiverse
free
Spinner body by educagenios
...spinner body by educagenios
thingiverse
spinner body
thingiverse
free
BODY UNKNOW by leonk
...body unknow by leonk
thingiverse
body unknow
thingiverse
free
Telecaster body by timovbeelen
...telecaster body by timovbeelen
thingiverse
simple telecaster body
thingiverse
free
sweetie bot body
...sweetie bot body
thingiverse
body of sweetie bot
Tube
thingiverse
free
tubes by
...tubes by
thingiverse
tube time
thingiverse
free
Edrio Two Tubes (Tubes) by Sidejoebob
...edrio two tubes (tubes) by sidejoebob
thingiverse
tube for the edrio two tubes helmet
thingiverse
free
Tube Racks
...tube racks
thingiverse
tube racks for 15ml & 50ml falcon tubes and 20mm round-bottom tubes
thingiverse
free
A tube squeezer for aluminum tubes by joergkrause
...rinted with pla. no support required. suitable for tubes up to 50mm
update 03.07.2018 better version uploadet. tube squeezer2.stl
thingiverse
free
Tube by williandb
...tube by williandb
thingiverse
tube
thingiverse
free
tube by shvanmajd
...tube by shvanmajd
thingiverse
tube
thingiverse
free
Tube by vovkachuk
...tube by vovkachuk
thingiverse
tube
thingiverse
free
tube by baramon
...tube by baramon
thingiverse
tube
thingiverse
free
Sliding tube cap or tube foot for 0.85" OD tube by DBQGrips
...f a tube leg to assist in sliding across the floor.
this was designed for 0.85" od tube but can be scaled for similar sizes.
thingiverse
free
Tubing straightener (4,8mm tubes)
... brake lines for example).
all you need is 8x 608 ball bearing, 8x m8 screw and 8x m8 nut.
print list:
2x body
8x roller
1x shims
4
thingiverse
free
arceau 4*4 jetman by jps57550
...arceau 4*4 jetman by jps57550
thingiverse
arceau de rechange pour le 4*4 jetman
thingiverse
free
4 x 4 Bench by pangeaexpress
...4 x 4 bench by pangeaexpress
thingiverse
3d model of our 4 x 4 bench. designed by eric arneson & nahal sohbati
thingiverse
free
4 by PencilPomelo
...4 by pencilpomelo
thingiverse
4
thingiverse
free
4 by Yangchigi
...4 by yangchigi
thingiverse
4
thingiverse
free
base for connect 4 puissance 4 by doubidou
...base for connect 4 puissance 4 by doubidou
thingiverse
connect 4 base puissance 4
thingiverse
free
#4 by ak47vogt
...#4 by ak47vogt
thingiverse
4 part
thingiverse
free
4 sharkz
...4 sharkz
thingiverse
4 sharkz
thingiverse
free
4 By 4 Lattice Cube by Trevin_9922Z
...n_9922z
thingiverse
a larger 4 by 4 version of my old lattice cube that will test your printer even more. once again, good luck!
thingiverse
free
4 Gewinnt / Connect Four / 4 in a row
...4 gewinnt / connect four / 4 in a row
thingiverse
4 gewinnt
thingiverse
free
4" to 4" Hose Adapter
... inch hoses together. i used the adapter to connect two aluminum dryer hoses to exhaust the fumes from my chinese laser engraver.
1
thingiverse
free
Magic Token +1/+1 & -1/-1 by Kilgara2B
...magic token +1/+1 & -1/-1 by kilgara2b
thingiverse
a magic the gathering token +1/+1 and -1/-1
thingiverse
free
MTG +1/+1 and -1/-1 counters by 4PStudiosGaming
...tudiosgaming
thingiverse
if you are in need of the 4pstudiosgaming +1/+1 and -1/-1 counters, then you came to the right page :-p
thingiverse
free
Fraction circle 1/2, 1/3, 1/4, 1/6, 1/8, 1/10, 1/12 by tfloveless
... 1/6, 1/8, 1/10, and 1/12 sized wedges as well as a circular base for them to fit onto. there are no labels on any of the pieces.
thingiverse
free
Adapter Syphon - 1 1/4" to 1 1/2" by _Stefano17_
...dapter for syphon - 1 1/4" to 1 1/2" h10,5mm
the project was realized with tolerances for printing with abs + tape ptf.
thingiverse
free
1 1/8" and or 1 1/5" headset press
...l fit both 1 1/8" and 1 1/5" bearing cups. i used a 3/8ths" threaded rod with nuts and thick washers on each end.
thingiverse
free
1-1/4" to 1-1/2" pipe cheeseborough clamp by aonomus
...design cheeseborough clamp for hanging lightfixtures and other items onto 1-1/4"-1-1/2" npt pipe. use at your own risk.
thingiverse
free
Shopping cart tokens 1€ 1$ 1£ by I_am_me
...them instead of money coin in your supermarket cart or in your swimming pool locker.
edit : updated 1£ coin with new dimensions
thingiverse
free
pipe thread adapter 1" to 1" 1/4 by Printerforever
...d adapter 1" to 1" 1/4 by printerforever
thingiverse
this is an adapter 1" to 1" 1/4 (male to male)
enjoy !
thingiverse
free
Playstation 2, 1:1 by Vitting
...playstation 2, 1:1 by vitting
thingiverse
made a 1:1 playstation 2.
thingiverse
free
Nesting Fraction Circle 1/2, 1/3, 1/4, 1/6, 1/8, 1/10, 1/12 V.2 by tfloveless
...re thinner and actually fit within each other to show equivalent fractions. also, check out the same version with braille (here).