Thingiverse
Anycubic Mega Zero 2.0 Stock Marlin Firmware by Computerized
by Thingiverse
Last crawled date: 4 years, 11 months ago
This is the stock source code for the anycubic mega zero 2.0 3d printer.
This is anycubic's version 0.0.1 of Marlin 2.0
-You will need to change the lcd language from cn to en in the configuration.h file to get
the proper display language.
-And I would highly recommend doing a PID calibration on both your HotEnd and your
HeatedBed, as the provided settings were way off for my machine.
For Uploading, you´ll need the "Sanguino"-Boards installed in your Arduino-IDE and a copy of the u8glib-library
This is anycubic's version 0.0.1 of Marlin 2.0
-You will need to change the lcd language from cn to en in the configuration.h file to get
the proper display language.
-And I would highly recommend doing a PID calibration on both your HotEnd and your
HeatedBed, as the provided settings were way off for my machine.
For Uploading, you´ll need the "Sanguino"-Boards installed in your Arduino-IDE and a copy of the u8glib-library