Thingiverse
Anycubic Kossel Linear Plus upgrade hotend E3D V6 effector by rosch8
by Thingiverse
Last crawled date: 4 years, 1 month ago
This is complete new printed effector for genuine full metal E3D V6 hotend upgrade for the Anycubic Kossel Linear Plus.
This new effector has several features:
optimized cooling of the heatsink of all bottom ribs, for cooling it is used genuine E3D hotend fan 30x30x10 mm
double part cooling fans type 4010 with optimized jets (easy changeable if needed) for better cooling. Recommended is to use silicone sock for heatblock
weight of the whole effector is just 120g, instead of 150g of the original. (less weight with double fans!)
better cable management
any lost of the printing volume
V6 hotend is more stabilized, because it is hold in effector at whole height of the heatsink, not just by groove at the top. So nozzel is very stable at height speed and fast changes of direction
wires from heater and termistor are drawn inside of the effector, so design is free of the wires drawn outside
All parts are designed for printing without support.
Effector was designed to use original magnetic holder calibrating switch.
Assembly is easy, hole for heatsink is tight, so maybe it needed some small adjustment by sharp knive to keep heatsing well.
For effector rods, hotend horseshoe holder, hotend fan, and magnetic calibration switch holder, you can cut M3 threads. Fan jets and 4010 fans you can use M2 screws or better DIN7981 2,2x 4,5 mm screws or similar.
On the top of exxector there are 2 holes. bigger one 3 mm is for 3mm nylon filament as wires lead to keep wires in nice big radius and prevent possible brak of wires by sharp bend.
Smaller one is for longer M3 screw (M3x50 mm) which is fixating point for wires and cable sleeve. Please use zip tightening strips to tighten wires and sleeve to this fixation pole so wires on effector are fixed and free from pull or push forces during effector movements.
This effector do not have any compromises to printing volume, allows faster and better prints due to less mass, and more stiff hotend holde, it has better cooling and wires are kept in safe way
This new effector has several features:
optimized cooling of the heatsink of all bottom ribs, for cooling it is used genuine E3D hotend fan 30x30x10 mm
double part cooling fans type 4010 with optimized jets (easy changeable if needed) for better cooling. Recommended is to use silicone sock for heatblock
weight of the whole effector is just 120g, instead of 150g of the original. (less weight with double fans!)
better cable management
any lost of the printing volume
V6 hotend is more stabilized, because it is hold in effector at whole height of the heatsink, not just by groove at the top. So nozzel is very stable at height speed and fast changes of direction
wires from heater and termistor are drawn inside of the effector, so design is free of the wires drawn outside
All parts are designed for printing without support.
Effector was designed to use original magnetic holder calibrating switch.
Assembly is easy, hole for heatsink is tight, so maybe it needed some small adjustment by sharp knive to keep heatsing well.
For effector rods, hotend horseshoe holder, hotend fan, and magnetic calibration switch holder, you can cut M3 threads. Fan jets and 4010 fans you can use M2 screws or better DIN7981 2,2x 4,5 mm screws or similar.
On the top of exxector there are 2 holes. bigger one 3 mm is for 3mm nylon filament as wires lead to keep wires in nice big radius and prevent possible brak of wires by sharp bend.
Smaller one is for longer M3 screw (M3x50 mm) which is fixating point for wires and cable sleeve. Please use zip tightening strips to tighten wires and sleeve to this fixation pole so wires on effector are fixed and free from pull or push forces during effector movements.
This effector do not have any compromises to printing volume, allows faster and better prints due to less mass, and more stiff hotend holde, it has better cooling and wires are kept in safe way
Similar models
thingiverse
free
Anycubic Kossel E3D v6 hotend assembly by swedishvaperuk
...ghtened.
updated fan mounts to use pegs on lower holes to allow for better fastening of the whole assembly to the effector plate.
thingiverse
free
Anycubic Kossel E3D v6 + Wire Strain Relief by foxel
...then bolted to the anycubic stock effector plate.
mountings for 2 x 4010 fans.
i've added wire strain relief to hold wires.
thingiverse
free
Effector Anycubic Kossel for Chimera E3D by VitaliySh
...blower radial cooling fans
effector print - petg.
nozle fan injector print - abs.
but unfortunately the print area is decreasing.
thingiverse
free
Triple fan holder 30mm by Hatsyflatsy
... 2 are for cooling you print object.
i made this so you can still use your own effector. and no need for re-calibrate your delta.
thingiverse
free
Anycubic Kossel e3D v6 Effector for 5015 part cooling fan by Monomethylhydrazine
...is "5015 anycubic kossel effector" which is designed using similar constraints as swedishvaperuk's design. however, i do not own...
thingiverse
free
Anycubic Kossel Linear Plus E3d V6 Effector Threaded HeatSink by Havalok
...3d v6 effector threaded heatsink by havalok
thingiverse
this is a remix for the v6 threaded heatsink available from trianglelab.
thingiverse
free
Fun duct 40 mm for hotend on effector kossel anycubic by Speedyluck
...verse
fun duct on 40mm fan to avoid cooling the aluminum heater block on kossel anycubic effector.
print right with 0.40 nozzle.
thingiverse
free
5015 fan mount for Spike Lee's Anycubic Kossel Magnetic Effector for E3D V6
... first and third side of effector - just like on screenshot.
adapter and mount printed with pla or petg, nozzle printed with abs.
thingiverse
free
Anycubic Kossel Plus E3D V6 Volcano fan duct for stock effector
...g for the complete solution to mount the v6 on a stock effector:https://www.thingiverse.com/thing:4152852
cad files are included!
thingiverse
free
Kossel Mini Delta Effector For E3D V6 With Dual Fan Mount by cristiprefac
...mount, so you can use auto bed leveling with it (see the pics).
you'll need a bunch of m3 screws and nuts to put it together.
Rosch8
thingiverse
free
Small wind turbine model by rosch8
...ind turbine. it turns in a wind, but not as generator of the electricity. just for fun and to see the wind direction and speed...
thingiverse
free
CR-10 mod cable holder for HOTEND STOCK FAN by rosch8
...h is glued on the top of the hotend fang and holds cables tight with fang.
note: yes, the free end of the strips i already cut...
thingiverse
free
Anti-tangle spool holder remix by rosch8
...y.
and i cut some volume of the cross beam to be able to print it laying down on bed instead of printing it at standing position.
thingiverse
free
Effector for Anycubic Predator with e3d V6 (Volcano too) hotend and 5015 blower by rosch8
...tor:https://www.thingiverse.com/thing:4329200
the best is to print it from asa or abs or pc or any other heat resistant material.
thingiverse
free
Precise filament guide for IKEA LACK enclosure Prusa by rosch8
...al petg.
for installation you need to cut 64 mm (2 1/2 " ) hole on top of the ikea lack table above middle path of filament.
thingiverse
free
Small wind turbine MK2 Remix 2 V tail fin by Stuart800
...oder v-leitwerk. with single or v-tail fin. danke an rosch8 für das tolle windrad! das windrad ist durchdacht konstruiert,...
thingiverse
free
Small wind turbine MK2 windmill by rosch8
...t new design parts. layer 0,16 mm, 6x perimeter. 30% infill. support only wall with angle 15°.
now it has to resist any storm...
thingiverse
free
easy tool for nyloc nut mod for prusa for mk2,5s mk3s, mk3s+ by rosch8
... the bed to one distance . that way your bed will be perfectly flat. i was able to set it in range 0,02 mm. i think it is enough.
thingiverse
free
Filament sensor for Prusa i3 mk3, mk3s and Bondtech mod by rosch8
...irmware.
yes printer give you message on display, that you changed printer type. but you do not worry, everything will work fine.
Effector
3d_ocean
$5
Radial Sound Effector
...e spheres will expand with your song. fully customisable, change the color, the size of the spheres or even put in different s...
3d_ocean
$12
3D Customizable Puzzle Set (16x10)
...mograph compatible (you can effect the pieces with mograph effector) - included also a non-mograph version with...
thingiverse
free
Effector by olo2000pm
...effector by olo2000pm
thingiverse
effector
thingiverse
free
CERAMBOT-Effector
...cerambot-effector
thingiverse
cerambot-effector
thingiverse
free
modulize effector by candyasdf
...ulize effector by candyasdf
thingiverse
mount things on effector with m3 screws
effector radius : 25.4mm
rod arm distance : 40mm
thingiverse
free
Delta Effector by zavier
...delta effector by zavier
thingiverse
delta effector with radial fan 50 and bltouch
thingiverse
free
D810 Effector by WhiteTiger13
...d810 effector by whitetiger13
thingiverse
this is d810 effector for d810 without autocalibration, and also cap for it.
thingiverse
free
Effector for Delta Printer
...effector for delta printer
thingiverse
effector for delta printer (3 color)
using diamond hotend
thingiverse
free
Delta effector magnetic by fpassos
...delta effector magnetic by fpassos
thingiverse
effector for e3dv6 hotend. i needed put the spheres (10mm) on the effector.
thingiverse
free
End Effector Gripper
...end effector gripper
thingiverse
end effector gripper
for a robotic arm
uses mg995 servo motor
Kossel
thingiverse
free
kossel bottom by keisukelin
...kossel bottom by keisukelin
thingiverse
kossel bottom
thingiverse
free
Leg for kossel by exelon
...leg for kossel by exelon
thingiverse
leg for kossel
thingiverse
free
Extruder for kossel by spencer_chen7
...extruder for kossel by spencer_chen7
thingiverse
extruder for kossel
thingiverse
free
Kossel parts by breezer83
...kossel parts by breezer83
thingiverse
kossel parts
thingiverse
free
Anycubic Kossel PID calibration
...ir mount:
kossel raspberry camera ir mount
extruder pid calibration.
simple extruder temperature calibration of your 3d printer.
thingiverse
free
Kossel Medium by flux83
...kossel medium by flux83
thingiverse
vertex for upgraded kossel mini
thingiverse
free
Kossel Mini by salesmendesandre
...kossel mini by salesmendesandre
thingiverse
custom kossel mini
frame 20x20
thingiverse
free
leg for kossel by ionulet
...leg for kossel by ionulet
thingiverse
leg for kossel with channel for end- stop cables
thingiverse
free
Optical Endstops Mounts for Kossel (with Better Kossel carriages) by dellfer
...stops on the anycubic kossel with better kossel carriages by codefreak https://www.thingiverse.com/thing:2501337
more precission
thingiverse
free
kossel??????? by wangrui19890704
...kossel??????? by wangrui19890704
thingiverse
??2020?2060???
Anycubic
thingiverse
free
anycubic filament holder
...anycubic filament holder
thingiverse
anycubic filament holder
thingiverse
free
Cableholder Anycubic Mega
...cableholder anycubic mega
thingiverse
cableholder anycubic mega
thingiverse
free
AnyCubic Toolholder by WildManPrinting
...anycubic toolholder by wildmanprinting
thingiverse
anycubic i3 mega toolholder that clips on the side of the spool a-frame.
thingiverse
free
AnyCubic Funnel by phana007
...anycubic funnel by phana007
thingiverse
funnel for anycubic resin and also a reducer for a normal soda bottle.
thingiverse
free
Anycubic Kossel PID calibration
...ir mount:
kossel raspberry camera ir mount
extruder pid calibration.
simple extruder temperature calibration of your 3d printer.
thingiverse
free
anycubic mega i3
...anycubic mega i3
thingiverse
anycubic i3 mega/mega s led 30mm 10-14v 6500k
thingiverse
free
Handle for anycubic by cruiser7
...handle for anycubic by cruiser7
thingiverse
its easier to handle the cover of the anycubic mono x and wash&care
thingiverse
free
anycubic predator Printbed by Lihyon
...anycubic predator printbed by lihyon
thingiverse
anycubic predator printbed
thingiverse
free
Anycubic Predator Triggers by marcelcountry
...anycubic predator triggers by marcelcountry
thingiverse
anycubic predator triggers
thingiverse
free
support anycubic cable by sarpdental
...support anycubic cable by sarpdental
thingiverse
support anycubic cable
Hotend
thingiverse
free
hotend by fablab_lueneburg
...hotend by fablab_lueneburg
thingiverse
hotend model
thingiverse
free
Hotend for Graber
...hotend for graber
thingiverse
hotend complement pastes for graber printerhttps://youtu.be/0koxhnsuhdy
thingiverse
free
Hotend adapter by antaviana
...hotend adapter by antaviana
thingiverse
hotend adapter
thingiverse
free
hotend fan by mming1106
...hotend fan by mming1106
thingiverse
hotend fan
thingiverse
free
Hotend schema by ione
...hotend schema by ione
thingiverse
hotend project schema
thingiverse
free
Fabtotum XY Hotend holder for E3D Hotend
...s with integrated supports.
more for the project you can see here: https://kf-designs.com/2019/09/07/fabtotum-printer-conversion/
thingiverse
free
HotEnd Stand by onepointdiy
...tend, when you make your new hotend or repair your j-head or mg-plus hotend.
the hole of 16mm, please adjust using a reamer, etc.
thingiverse
free
fast magnetic hotend changer for Chimera Hotend by Draman
...chimera hotend !
and new basis (the hole from original is to small)
it is a remix form skimmy's fast magnetic hotend changer
thingiverse
free
Hotend Fan Adapter for MicroSwiss All Metal Hotend by jo_schi_man
...
thingiverse
little change for the hotend fan adapter to hold the microswiss all metal hotend (slightly longer and sharp edges).
thingiverse
free
Merlin Hotend by Alejanson
...merlin hotend by alejanson
thingiverse
this is a 1:1 drawing of the classic merlin hotend.
E3D
turbosquid
$23
E3D - Google Home
... 3d model e3d - google home for download as max, obj, and c4d on turbosquid: 3d models for games, architecture, videos. (1192509)
cg_studio
free
e3d model
...e3d model
cgstudio
- e 3d model, royalty free license available, instant download after purchase.
turbosquid
$2
Syringe C4D (E3D Ready)
...lty free 3d model syringe c4d (e3d ready) for download as c4d on turbosquid: 3d models for games, architecture, videos. (1336720)
turbosquid
$12
Microphone USB E3D and C4D
...ree 3d model microphone usb e3d & c4d for download as c4d on turbosquid: 3d models for games, architecture, videos. (1568216)
turbosquid
$29
E3D - OnePlus 6 Black
...model e3d - oneplus 6 black for download as max, obj, and c4d on turbosquid: 3d models for games, architecture, videos. (1358534)
turbosquid
$29
E3D - Motorola One 2018
...del e3d - motorola one 2018 for download as max, obj, and c4d on turbosquid: 3d models for games, architecture, videos. (1358533)
turbosquid
$29
E3D - Disney MagicBands 2
...l e3d - disney magicbands 2 for download as max, obj, and c4d on turbosquid: 3d models for games, architecture, videos. (1355515)
turbosquid
$29
E3D - Samsung Z4 Smartphone
...e3d - samsung z4 smartphone for download as max, obj, and c4d on turbosquid: 3d models for games, architecture, videos. (1182179)
turbosquid
$23
E3D - Razer Phone model
...del e3d - razer phone model for download as max, obj, and c4d on turbosquid: 3d models for games, architecture, videos. (1231207)
turbosquid
$23
E3D - Alcatel Idol 5
... model e3d - alcatel idol 5 for download as max, obj, and c4d on turbosquid: 3d models for games, architecture, videos. (1212799)
V6
3d_export
$100
v6 engine
...engine
3dexport
complete v6 engine modeled on solidworks 2017 along with .stl, .sldprt and .sldasm of all th parts and assembly.
3d_export
$10
V6 engine
... the first v6 engines were designed and produced independently by marmon motor car company, deutz gasmotoren fabrik and delahaye.
3d_export
$35
v6 engine
...s a complete model of a v6 engine containing over 400 components. you can contact me for a video of all the components assembling
3d_export
$10
v6 engine
...v6 engine
3dexport
turbosquid
$25
Bed1001-v6
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$22
Chair2-v6
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
V6.mb
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$20
V6 engine
...rovided in this package is all the parts in sldprt format and assembly in sldasm format. i can also convert the format on demand.
3ddd
$1
Стол V6
...6" в стиле дизельпанк изготовлен из блока двигателя, 4х поршней и 4х шатунов.
столешница изготовлена из стекла толщиной 8мм.
cg_studio
$199
V6 VVTi3d model
...v6 vvti3d model
cgstudio
.3ds - v6 vvti 3d model, royalty free license available, instant download after purchase.
Upgrade
turbosquid
$15
Upgraded Glock
...e 3d model upgraded glock for download as obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1185950)
3ddd
$1
Calligaris / UPGRADE
...calligaris / upgrade
3ddd
calligaris
c материалом
3d_export
free
cz upgrade
...cz upgrade
3dexport
https://www.buymeacoffee.com/mestrezen3d https://linktr.ee/mestrezen3
turbosquid
$80
Custer Tank upgrade
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$39
Domestos 1 upgrade
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$10
Upgraded tea cup
...upgraded tea cup
3dexport
a cup with an unusual design and a unique shape for a more enjoyable tea experience
3d_export
$8
dixy outlander classic style upgraded poplar wood lounge chair
...utlander classic style upgraded poplar wood lounge chair
3dexport
dixy outlander classic style upgraded poplar wood lounge chair
turbosquid
free
AK-12 + Upgrades low-poly 3D model
...ow-poly 3d model for download as fbx, blend, and unitypackage on turbosquid: 3d models for games, architecture, videos. (1501145)
evermotion
$700
Upgrade from V-ray 1.5 to 3.5 for 3ds max
...here is no need to purchase a new dongle - your current dongles will be reprogrammed to carry v-ray 3. evermotion 3d models shop.
evermotion
$300
Upgrade from V-Ray 2.0 to V-ray 3.5 for 3ds Max
... interface (gui) for editing settings on one machine and one render node for rendering on one machine. evermotion 3d models shop.
Linear
3ddd
$1
Linear Diffusers
...linear diffusers
3ddd
диффузор
set of linear diffusers for ceiling.
design_connected
$27
Linear Sofa
...linear sofa
designconnected
scp linear sofa computer generated 3d model.
design_connected
$18
Atlantis linear
...atlantis linear
designconnected
terzani atlantis linear pendant lights computer generated 3d model. designed by barlas baylar.
3d_export
$5
light linear unit
...light linear unit
3dexport
light linear unit
turbosquid
$5
Linear Actuator
...
royalty free 3d model linear actuator for download as blend on turbosquid: 3d models for games, architecture, videos. (1589061)
turbosquid
$29
Linear panel
...oyalty free 3d model linear panel for download as max and obj on turbosquid: 3d models for games, architecture, videos. (1391254)
turbosquid
$12
Linear Chandelier
...y free 3d model linear chandelier for download as max and obj on turbosquid: 3d models for games, architecture, videos. (1574289)
turbosquid
$10
Linear Axis
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Grohe Lineare
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
Linear Unit 3D Model
...linear unit 3d model
3dexport
linear unit force torque velocity
linear unit 3d model fau 71218 3dexport
Plus
turbosquid
$2
plus-plus puzzle and lego
...d model plus-plus puzzle and lego for download as stl and obj on turbosquid: 3d models for games, architecture, videos. (1662633)
3ddd
$1
Стенка Plus
...стенка plus
3ddd
plus , модная мебель
фабрика "модная мебель", модель plus
3ddd
$1
Спальня METIS plus
... hulsta , metis , спальня
спальня metis plus
design_connected
$11
be plus B+
...be plus b+
designconnected
blå station be plus b+ chairs computer generated 3d model. designed by börge lindau.
design_connected
$11
Bank Plus
...bank plus
designconnected
röthlisberger kollektion bank plus coffee tables computer generated 3d model. designed by atelier oi.
3ddd
$1
elos Plus
... candela
elos plus — мультифункциональный аппарат для проведения лазерного и ipl лечений
3ddd
$1
Calligaris Even Plus
...calligaris even plus
3ddd
calligaris
calligaris_chair_even plus
design_connected
$29
Basket Plus
...nconnected
photo-realistic 3d models of the basket plus bed from bonaldo for 3d architectural and interior design presentations.
3ddd
free
Artpole Faktum Plus
... артполе , панель
artpole faktum plus
размеры:
высота 625мм
ширина 800мм
глубина 17мм
3ddd
$1
Мария / Jazz Plus
...мария / jazz plus
3ddd
мария
кухня фабрики мария модель__jazz plus