Thingiverse
Anycubic Kossel Hotend Cableholder oversized holes by Russ_T
by Thingiverse
Last crawled date: 3 years, 1 month ago
This is a remix of Atziano's excellent cable holder, but with bigger holes.
This part is for attaching the wiring harness that leads from the hotend to the control.
The cables are led straight up to avoid a collision with the delta arms.
Moreover, this also means a strain relief for the cables from the hotend.
I found my socket cap screws would not easily fit, possibly due to my printing. This model takes the original, and enlarges the screw head space to 6mm.
The second picture shows the original dimensions on the left, and this remix on the right.
This part is for attaching the wiring harness that leads from the hotend to the control.
The cables are led straight up to avoid a collision with the delta arms.
Moreover, this also means a strain relief for the cables from the hotend.
I found my socket cap screws would not easily fit, possibly due to my printing. This model takes the original, and enlarges the screw head space to 6mm.
The second picture shows the original dimensions on the left, and this remix on the right.
Similar models
thingiverse
free
Wire guide for 2020 profiles (e.g. CR10, Tevo Tornado etc.) Remix by jannis
... the hotend bar.
use m3 x 16mm screws and m3 t-nuts.
remixed: added holes in the original design to be able to insert cable ties.
thingiverse
free
(Bigger holes) Hotend bowden tube and cables holder / strain relief for Creality Ender3 Remix
...nd bowden tube and cables holder / strain relief for creality ender3 remix
thingiverse
my zip ties was too big for the original.
thingiverse
free
Hotend cables holder for minV2 Ender 3 bowden tube by Codeweav3r
...erse
remix with holder for the bowden tube and cables, made the screw hole tighter and extended the frame to remove wiggle room.
thingiverse
free
Cable Chain Diamond Hotend upgrade by cwthoma
... get a chance. the cable chain outside end is zip tied to the extruder carriage using the same holes as the bearing zip ties use.
thingiverse
free
6mm cable holder with screw holes by b2vn
.... this is a remix from http://www.thingiverse.com/thing:198613. i just added screw holes and some reenforcement around the holes.
thingiverse
free
HotEnd Cable holder
...hotend cable holder
thingiverse
cable holder for the hotend.
need to replace the original screw by 3mm x 10mm
thingiverse
free
Dual Hotend for Smartfriend Smartrapcore by Davemoon
...rapcore by davemoon
thingiverse
this is a dual hotend holder for my smartrapcore printer. it uses the original holes and screws.
thingiverse
free
Wischis Extruder Cable Support by wischi
...rt really quick.
it lets you attach the cables for hotend, hotend sensor and stepper to the stepper with a screw and cabletie.
thingiverse
free
R-CNC - Cable grommet 30mm screwed by krapapock
...eful, this one is for 30mm hole. the original part is for a 32mm hole.
if needed, the fusion 360 export file is in the downloads.
thingiverse
free
Hotend Holder V2 by BKTRIE
...ream in favor of meterial cooling .. an i added a clip for cables. at least i bring in a screw to clamp the hotend more effective
Cableholder
thingiverse
free
cableholder by quindi
...cableholder by quindi
thingiverse
cableholder
thingiverse
free
cableholder
...cableholder
thingiverse
a cable holder mainly for 3d printing.
thingiverse
free
Cableholder Anycubic Mega
...cableholder anycubic mega
thingiverse
cableholder anycubic mega
thingiverse
free
(Lab) cableholder by teunnoord
...(lab) cableholder by teunnoord
thingiverse
an easy expandable cableholder to store your cables
thingiverse
free
Vorwerk Cableholder Kabelhalter by wombolombo
...vorwerk cableholder kabelhalter by wombolombo
thingiverse
just a cableholder.
thingiverse
free
Cableholder for Toolson hotendholder by djdj111
...cableholder for toolson hotendholder by djdj111
thingiverse
front-cableholder for toolsonhotendholder
thingiverse
free
Cableholder by Protodude
...cableholder by protodude
thingiverse
just another cable holder
thingiverse
free
cableholder by pad86
...cableholder by pad86
thingiverse
holes for srews outside and a not so high.
thingiverse
free
Cableholder by mdnelson1234
...cableholder by mdnelson1234
thingiverse
device to capture and hold cables in place
thingiverse
free
Cableholder x5
... hotglue it to the side of your desk like i did.
if you rotate the model before printing you can probably print without supports.
Russ
thingiverse
free
Leman Russ Modification
...izable as a leman russ. these are the parts i used. it takes some sawing to get the tracks right, but i like how it turned out.
thingiverse
free
dé russe by HUGO825
...dé russe by hugo825
thingiverse
thingiverse
free
Russ Rogers by altais
...russ rogers by altais
thingiverse
for the hacker chess project! more info at http://hackerchess.com
thingiverse
free
Leman Russ Side Door by BigBattleToadRick
...leman russ side door by bigbattletoadrick
thingiverse
thingiverse
free
Leman Russ Cannon Adaptors for Gryphonne Turret - WH40k
...phonne turret - wh40k
thingiverse
adaptors for original gw cannons for the leman russ tank to fit the gryphonne turret by skar84
thingiverse
free
Leman Russ Bunker by Ravencos27
....
modular for two options; covered and un-covered.
print list:
lrb roof x1
lrb rebars x1
lrb side 1 x1
lrb side 2 x1
lrb front x1
thingiverse
free
Russ McIntosh Action Figure by Russ_MC
... features 13 points of articulation and stands 10" tall.
utilizing the peter cooper figure, i just added my own extra head.
thingiverse
free
Chief Russ 40k Tank by Ssmigielski
...k, by the engine radiator
sponson weapons from:https://www.thingiverse.com/thing:3534087https://www.thingiverse.com/thing:3538940
thingiverse
free
Epic Scale Alternate Russ Turrets by Mkhand_Industries
...ant some variety in their armoured companies. all turret elevation set to 15 degrees. apologies for the inconsistent positioning.
thingiverse
free
Epic Scale Leman Russ Incinerator Turret v2 by Mkhand_Industries
.../2017: redid the demi-culverin completely, now more resembles the inspiration. made some details on the rear turret a bit larger.
Oversized
thingiverse
free
Oversized key by BubaLettow
...ized key by bubalettow
thingiverse
an oversized key, easy to print used for a theater production but could be used for anything.
thingiverse
free
Overseer token holder by maboulton
...overseer token holder by maboulton
thingiverse
token holder for the overseer board game
thingiverse
free
Oversize Hook for Shower Rings by msadler2
...oversize hook for shower rings by msadler2 thingiverse an oversized hook to use with your shower curtain...
thingiverse
free
Halloween Cookie Cutters - Oversized by Scribbless
... by scribbless
thingiverse
these are oversized cookie cutters i created for a friend. they are large, so pay attention to that.
thingiverse
free
Oversized Egg Feet Holder by hassallthehoff
...oversized egg feet holder by hassallthehoff
thingiverse
a pair of oversized novelty egg cup shoes, to hold your egg this easter
thingiverse
free
Oversized Magic The Gathering Card Holder by jmyers808
...oversized magic the gathering card holder by jmyers808
thingiverse
this is a holder for oversize magic the gathering cards
thingiverse
free
GoPro Oversized Thumbwheel V1.3 by IntenseDef
...bwheel v1.3 by intensedef
thingiverse
gopro oversized thumbwheel v1.3
revised to v1.3 - stronger, drilled out, larger dia. wheel
thingiverse
free
Pelton oversized transport by lebois43
...pelton oversized transport by lebois43
thingiverse
support for pelton turbine
thingiverse
free
2 piece oversized throwing knife by nunthok3D
...2 piece oversized throwing knife by nunthok3d
thingiverse
easy printing 2 piece oversized kunai throwing knife
thingiverse
free
Oversized Pepperbox gun by Snorri
...for a regular size), the barrel moves, just add a m5 screw between the 2 body halves before glueing, and a bolt inside the canon.
Kossel
thingiverse
free
kossel bottom by keisukelin
...kossel bottom by keisukelin
thingiverse
kossel bottom
thingiverse
free
Leg for kossel by exelon
...leg for kossel by exelon
thingiverse
leg for kossel
thingiverse
free
Extruder for kossel by spencer_chen7
...extruder for kossel by spencer_chen7
thingiverse
extruder for kossel
thingiverse
free
Kossel parts by breezer83
...kossel parts by breezer83
thingiverse
kossel parts
thingiverse
free
Anycubic Kossel PID calibration
...ir mount:
kossel raspberry camera ir mount
extruder pid calibration.
simple extruder temperature calibration of your 3d printer.
thingiverse
free
Kossel Medium by flux83
...kossel medium by flux83
thingiverse
vertex for upgraded kossel mini
thingiverse
free
Kossel Mini by salesmendesandre
...kossel mini by salesmendesandre
thingiverse
custom kossel mini
frame 20x20
thingiverse
free
leg for kossel by ionulet
...leg for kossel by ionulet
thingiverse
leg for kossel with channel for end- stop cables
thingiverse
free
Optical Endstops Mounts for Kossel (with Better Kossel carriages) by dellfer
...stops on the anycubic kossel with better kossel carriages by codefreak https://www.thingiverse.com/thing:2501337
more precission
thingiverse
free
kossel??????? by wangrui19890704
...kossel??????? by wangrui19890704
thingiverse
??2020?2060???
Anycubic
thingiverse
free
anycubic filament holder
...anycubic filament holder
thingiverse
anycubic filament holder
thingiverse
free
Cableholder Anycubic Mega
...cableholder anycubic mega
thingiverse
cableholder anycubic mega
thingiverse
free
AnyCubic Toolholder by WildManPrinting
...anycubic toolholder by wildmanprinting
thingiverse
anycubic i3 mega toolholder that clips on the side of the spool a-frame.
thingiverse
free
AnyCubic Funnel by phana007
...anycubic funnel by phana007
thingiverse
funnel for anycubic resin and also a reducer for a normal soda bottle.
thingiverse
free
Anycubic Kossel PID calibration
...ir mount:
kossel raspberry camera ir mount
extruder pid calibration.
simple extruder temperature calibration of your 3d printer.
thingiverse
free
anycubic mega i3
...anycubic mega i3
thingiverse
anycubic i3 mega/mega s led 30mm 10-14v 6500k
thingiverse
free
Handle for anycubic by cruiser7
...handle for anycubic by cruiser7
thingiverse
its easier to handle the cover of the anycubic mono x and wash&care
thingiverse
free
anycubic predator Printbed by Lihyon
...anycubic predator printbed by lihyon
thingiverse
anycubic predator printbed
thingiverse
free
Anycubic Predator Triggers by marcelcountry
...anycubic predator triggers by marcelcountry
thingiverse
anycubic predator triggers
thingiverse
free
support anycubic cable by sarpdental
...support anycubic cable by sarpdental
thingiverse
support anycubic cable
Hotend
thingiverse
free
hotend by fablab_lueneburg
...hotend by fablab_lueneburg
thingiverse
hotend model
thingiverse
free
Hotend for Graber
...hotend for graber
thingiverse
hotend complement pastes for graber printerhttps://youtu.be/0koxhnsuhdy
thingiverse
free
Hotend adapter by antaviana
...hotend adapter by antaviana
thingiverse
hotend adapter
thingiverse
free
hotend fan by mming1106
...hotend fan by mming1106
thingiverse
hotend fan
thingiverse
free
Hotend schema by ione
...hotend schema by ione
thingiverse
hotend project schema
thingiverse
free
Fabtotum XY Hotend holder for E3D Hotend
...s with integrated supports.
more for the project you can see here: https://kf-designs.com/2019/09/07/fabtotum-printer-conversion/
thingiverse
free
HotEnd Stand by onepointdiy
...tend, when you make your new hotend or repair your j-head or mg-plus hotend.
the hole of 16mm, please adjust using a reamer, etc.
thingiverse
free
fast magnetic hotend changer for Chimera Hotend by Draman
...chimera hotend !
and new basis (the hole from original is to small)
it is a remix form skimmy's fast magnetic hotend changer
thingiverse
free
Hotend Fan Adapter for MicroSwiss All Metal Hotend by jo_schi_man
...
thingiverse
little change for the hotend fan adapter to hold the microswiss all metal hotend (slightly longer and sharp edges).
thingiverse
free
Merlin Hotend by Alejanson
...merlin hotend by alejanson
thingiverse
this is a 1:1 drawing of the classic merlin hotend.
Holes
thingiverse
free
Holes, holes, holes! by runtimeterror
...ow and then.
the example photo shows two prints for 8 mm (7.6 .. 8.4) and 3 mm (2.6 .. 3.4).
the stl file is an example for 3 mm.
thingiverse
free
Hole Thru a Hole in a Hole by Denali3DDesign
...he imagination."
also available on shapeways if you want to purchase one already made: http://www.shapeways.com/model/723930
thingiverse
free
Hole In Wall
...hole in wall
thingiverse
hole in wall
thingiverse
free
die in a hole
...die in a hole
thingiverse
die in a hole literally
thingiverse
free
holed oloid
...holed oloid thingiverse an oloid with holes because why...
thingiverse
free
hole by markhei1993
...hole by markhei1993
thingiverse
hole by mark [created on 3dtin]
thingiverse
free
TRINUS filament hole cover For spool hole by SheepsFeaTheR
...spool hole used to pass filaments from enclosure spool holes ...
thingiverse
free
hole cover by g3org
...hole cover by g3org thingiverse hole cover to close holes in...
thingiverse
free
Hole finishing by manticus
...hole finishing by manticus
thingiverse
issue while drilling a hole, this is a hole fixer... lol
thingiverse
free
Hole Punch by cyberparra
...punch by cyberparra thingiverse simple hole punch to make holes in paper &...
T
thingiverse
free
T
...t
thingiverse
its a t
thingiverse
free
T-steel T-profile T-bar T-iron ending cap by fzellini
...l t-profile t-bar t-iron ending cap by fzellini
thingiverse
ending cap for iron t profile, useful to don't scratch the floor
thingiverse
free
t by Fminnella
...t by fminnella
thingiverse
t
thingiverse
free
T Puzzle (Gardner's T) by lkf
...t puzzle (gardner's t) by lkf
thingiverse
it's a t-puzzle
according to "gardner's t" ratio
thingiverse
free
Micro T
...micro t
thingiverse
micro t
thingiverse
free
BTS-2 / T-54-T
...r 15mm wargaming. base vehicle was from bergman's excellent t-54 hull. found here: https://www.thingiverse.com/thing:3766220
thingiverse
free
t by MalW
...t by malw
thingiverse
otcr letter t
thingiverse
free
3_way T
...3_way t
thingiverse
made length of t adjustable.
thingiverse
free
T 62A
...t 62a
thingiverse
thi is t 62a tank
thingiverse
free
T-nut for 3030 T-Slot by Piyush_Vrock09
...t-nut for 3030 t-slot by piyush_vrock09
thingiverse
t-nut adaptor