Thingiverse
Anycubic I3 Mega XXL (printing volume 310mm*310mm*400mm) by Sergiu_I
by Thingiverse
Last crawled date: 4 years, 6 months ago
This mod turns the Anycubic I3 Mega into a large volume printer (310mm x 310mm x 400mm) - a substantial +400% printing volume increase versus the original design (210mm x 210mm x 205mm). The total costs for the mod should be in the range of 125$ or equivalent - 300mm+ hotbed, 3m Al profile 2040, three sets of longer rods Ø8 (2 x 500mm + 1 x 450mm), a set of longer driveshafts M8x2 (500mm), longer belts, connecting standard parts. A detailed BoM will be eventually provided.
I have designed the mod to be used with the Creality 310 x 310 hotbed; Anet 300 x 300 12V hotbed or etc. can be alternative solutions.
The mod can use any X-axis gantry design solution - including the original Anycubic design solution. Only the rods used for the X-axis have to be 85mm longer as the ones in use - e.g. for the FoX 45mm gantry system shown in pictures I have to use 450mm rods (originally 365mm rods)
As specified, the mod is WIP, no individual detail stl models given yet, I want first to print, assemble and test everything. The included large stl shows a quick preview of the complete additional mainframe required to increase the printing capabilities.
Current CAD models (Step) and hi-res pictures available in:https://github.com/Sergiu-I
Edit: most of the parts printed. In this process a few changes to be made identified. Models to be updated.
I have designed the mod to be used with the Creality 310 x 310 hotbed; Anet 300 x 300 12V hotbed or etc. can be alternative solutions.
The mod can use any X-axis gantry design solution - including the original Anycubic design solution. Only the rods used for the X-axis have to be 85mm longer as the ones in use - e.g. for the FoX 45mm gantry system shown in pictures I have to use 450mm rods (originally 365mm rods)
As specified, the mod is WIP, no individual detail stl models given yet, I want first to print, assemble and test everything. The included large stl shows a quick preview of the complete additional mainframe required to increase the printing capabilities.
Current CAD models (Step) and hi-res pictures available in:https://github.com/Sergiu-I
Edit: most of the parts printed. In this process a few changes to be made identified. Models to be updated.