Thingiverse
Anycubic i3 Mega X bed leveling g code gcode level by aqibnaseem
by Thingiverse
Last crawled date: 4 years, 11 months ago
I could not find gcode for the Anycubic i3 Mega X to assist in the levelling of the bed so I created one and you can find the details below;
This to help assist level the bed with the paper method.
you can also attach a Dial Caliper and use this code to level your bed. (In Progress)
PLEASE NOTE:
I have included gcode with additional passes as I found i really needed 2-3 passes to dial in the bed.
The code will move the nozzle to the following 5 points in a cross pattern.
4 2
5
1 3
The Nozzle will go to each point above, land at the base and wait 8 seconds
It will raise for 2 seconds and will again go down again to Z0 for 8 seconds
The nozzle with then continue until all points are completed.
The above is to assist in levelling the bed with paper and knobs.
This to help assist level the bed with the paper method.
you can also attach a Dial Caliper and use this code to level your bed. (In Progress)
PLEASE NOTE:
I have included gcode with additional passes as I found i really needed 2-3 passes to dial in the bed.
The code will move the nozzle to the following 5 points in a cross pattern.
4 2
5
1 3
The Nozzle will go to each point above, land at the base and wait 8 seconds
It will raise for 2 seconds and will again go down again to Z0 for 8 seconds
The nozzle with then continue until all points are completed.
The above is to assist in levelling the bed with paper and knobs.