Thingiverse
AnyCubic I3 Mega Fan support by eferbel
by Thingiverse
Last crawled date: 3 years, 1 month ago
If you replace the original drivers, you could have problems with the fan because the airflow does not reach all drivers correctly.
It’s possible that the new heatsinks may be higher than the older in this case the fan will be in a forced position avoiding the enclosure doesn't close properly.
Or you just don't want such a loud fan.
In this case, change the original fan for a big (100x100x12mm), slow (1000 RPM) and quiet (14.5dB) fan like Scythe KAZE-JYU slim SY1012SL12L 12V
To install the new Fan, you need print a new support piece/s, and there are two options:
1) One support piece (A) like original support, the fan will be fix with 2 screws.
2) Two supports pieces (A, B and C), now the fan will be fix with 4 screws.
The first option is easy and fast but the second is more robust, better and more complicated.
The files are for Trigorilla 8-bit (The drivers are not soldered)
Fan_Support_A.stl
Fan_Support_B.stl
Fan_Support_C.stl
For more information, see the detailed instructions in PDF herePDF Erratum: On the first picture at the section "Option with two supports", I marked the single black screw with M3 x 15 and the four screws for the fan with M3 x 25. is the other way round. (Thanks to R3AL3X for the feedback)
If you like this project, please consider supporting me by sending a tip on thingiverse or my PayPal here
26-11-2018
Uploaded the version for new i3 Mega V4 mainboard:https://www.thingiverse.com/asset:118024
Thank you to Hawker2007 for test the fan support modifications.https://www.thingiverse.com/make:569049
14-06-2019 (edited 03-11-2019)
Uploaded new support A (original i3 Mega) for these size fans:
100x100mm x (10 or 12) mm only if have holes for 92x92mm
92x92mm x (10 or 12) mm
80x80mm x (10 or 12) mm (For this fan only need new support A)
https://www.thingiverse.com/download:6642034
05-01-2020 (edited 30-09-2020)
New release V2 for fan support 120x120mm x (10 or 12) mm and holes 100x100mm
The files are for Trigorilla 8-bit (The drivers are not soldered)
Fan_Support_120x12_V2.zip
This version are tested review the "makes section"
16-01-2020
Update the support for size fan 92x92mm x (14 or less) mm and holes 80x80mm.
The new V2 version files for Trigorilla 8-bit (The drivers are not soldered) and low heatsinks:
Fan_Support_92x14_A_V2.stl
Fan_Support_92x14_B_V2.stl
Fan_Support_92x14_C_V2.stl
Note: Print with 75% infill
If the heatsink is high, check this thingiverse:
https://www.thingiverse.com/thing:4667673
30-09-2020
Added tests to check horizontal expansion before print the supports.
Test_Fit.zip
Print all the test STL files and follow theses instructions that you will find inside the zip file.
If it doen't fit, please modify the horizontal expansion on your sliccer, print again and check.
All STL files must be printed with the same horizontal expansion.
When all fit tests pass, then print the fan supports.
It’s possible that the new heatsinks may be higher than the older in this case the fan will be in a forced position avoiding the enclosure doesn't close properly.
Or you just don't want such a loud fan.
In this case, change the original fan for a big (100x100x12mm), slow (1000 RPM) and quiet (14.5dB) fan like Scythe KAZE-JYU slim SY1012SL12L 12V
To install the new Fan, you need print a new support piece/s, and there are two options:
1) One support piece (A) like original support, the fan will be fix with 2 screws.
2) Two supports pieces (A, B and C), now the fan will be fix with 4 screws.
The first option is easy and fast but the second is more robust, better and more complicated.
The files are for Trigorilla 8-bit (The drivers are not soldered)
Fan_Support_A.stl
Fan_Support_B.stl
Fan_Support_C.stl
For more information, see the detailed instructions in PDF herePDF Erratum: On the first picture at the section "Option with two supports", I marked the single black screw with M3 x 15 and the four screws for the fan with M3 x 25. is the other way round. (Thanks to R3AL3X for the feedback)
If you like this project, please consider supporting me by sending a tip on thingiverse or my PayPal here
26-11-2018
Uploaded the version for new i3 Mega V4 mainboard:https://www.thingiverse.com/asset:118024
Thank you to Hawker2007 for test the fan support modifications.https://www.thingiverse.com/make:569049
14-06-2019 (edited 03-11-2019)
Uploaded new support A (original i3 Mega) for these size fans:
100x100mm x (10 or 12) mm only if have holes for 92x92mm
92x92mm x (10 or 12) mm
80x80mm x (10 or 12) mm (For this fan only need new support A)
https://www.thingiverse.com/download:6642034
05-01-2020 (edited 30-09-2020)
New release V2 for fan support 120x120mm x (10 or 12) mm and holes 100x100mm
The files are for Trigorilla 8-bit (The drivers are not soldered)
Fan_Support_120x12_V2.zip
This version are tested review the "makes section"
16-01-2020
Update the support for size fan 92x92mm x (14 or less) mm and holes 80x80mm.
The new V2 version files for Trigorilla 8-bit (The drivers are not soldered) and low heatsinks:
Fan_Support_92x14_A_V2.stl
Fan_Support_92x14_B_V2.stl
Fan_Support_92x14_C_V2.stl
Note: Print with 75% infill
If the heatsink is high, check this thingiverse:
https://www.thingiverse.com/thing:4667673
30-09-2020
Added tests to check horizontal expansion before print the supports.
Test_Fit.zip
Print all the test STL files and follow theses instructions that you will find inside the zip file.
If it doen't fit, please modify the horizontal expansion on your sliccer, print again and check.
All STL files must be printed with the same horizontal expansion.
When all fit tests pass, then print the fan supports.
Similar models
thingiverse
free
Anycubic i3 Mega 120mm Fan Holder for TMC2209 Stepper Drivers by arov
...a normal 25 mm thick fan. also 3 pcs of longer m3 screws are required for the motherboard as this thing mounts on the same holes.
thingiverse
free
Anycubic Trigorilla 50mm turbo fan mount for stepper drivers cooling
...inks (those for raspberry pi are fine): on the processor (14x14x5mm heatsink) and on the four mosfets (8x8x5mm heatsinks).
enjoy!
thingiverse
free
Anycubic i3 Mega Bowden Fan Optimization 40mm - SILENT by Meganudelauflauf
...rew din912 m3x5 mm (any-frame)
2x screw din912 m3x10 mm (duese - rahmen)
if there are any questions feel free to ask!
greetings
thingiverse
free
Fan duct for Anycubic i3 Mega-S by Hotte70
...he installation:
fan: sunon 50 x 50 x 15 mm mf50151vx-a99
screws: m3 x 12, 2 pieces and m3 x 20, 1 piece
screw nut: m3, 1 piece
thingiverse
free
Trigorilla Cooling Duct I3 Mega 50x15 Radial Fan v4 by RTamer
... problem. you'll need a longer 4mm screw (25mm) to brace the fan and a small piece of double sided tape to keep it in place.
thingiverse
free
ANYCUBIC I3 MEGA V2 - DUAL FAN DRIVERS by BEUSX
...
when i tried to close the printer i noticed that the support was higher than 2 mm.
so i created the 1.2 version lower than 2 mm!
thingiverse
free
Anycubic i3 Mega (Mega-S, Mega Pro) 50 mm fan duct for stepper drivers by DionisRastr
...or basic 50 mm fans. include only one part with two attachment points. aslo there are gasket for orinting from flexible filaments
thingiverse
free
Anycubic i3 Mega (Mega-S, Mega Pro) 50 mm fan duct for stepper drivers by DionisRastr
...or basic 50 mm fans. include only one part with two attachment points. aslo there are gasket for orinting from flexible filaments
thingiverse
free
Double 40mm fan holder for Anycubic I3 Mega stepper driver/mainboard by derebbe
...aze.
the bracket itself can be fastened by using the original screws of the replaced fan, for the new fans i used 14mm m2 screws.
thingiverse
free
Anycubic Mega X Silent Fan Mod by Lecso
...n blows through the heatsinks and blows the hot air out on the side of the printer. it fits a 40mm fan.
you need:
2pcs of m3 nuts
Eferbel
thingiverse
free
Heatsink filing box for TMC drivers / Caja para cortar o limar el disipador de los drivers TMC by eferbel
...odos los disipadores.
feliz bricolaje
si te gustó este proyecto, puedes invitarme a un café a través de thingiverse o paypal aquí
thingiverse
free
Botellero / Bottle rack by eferbel
...ma poner la pieza en diagonal a esta.
si te gustó este proyecto, puedes invitarme a un café a través de thingiverse o paypal aquí
thingiverse
free
Climbing lamp / Lámpara tipo “bombilla escaladora” by eferbel
...is lamp. (is wroten in spanish, but is easy to follow because have a lot of photos and you can translate using google translator)
thingiverse
free
PSU cover AI3 Mega (FAN 80x80x15) / Carcasa fuente de alimentación AI3 Mega (Ventilador 80x80x15) by eferbel
...su cover for fan 80x80x15 anycubic i3 mega.
carcasa fuente de alimentación para un ventilador 80x80x15 de una anycubic i3 mega.
thingiverse
free
Soporte mascarilla gecko by eferbel
...e 4 mm y dos tonillos 2,5 x 20 mm. los geckos que van directos a la pared necesitarán un taco de 4 mm y un tornillod 2,5 x 20 mm.
thingiverse
free
LEDs Anycubic I3 Mega by eferbel
...
1 switch_holder.stl
el montaje es muy fácil de realizar, solo tienes que seguir los pasos del video:https://youtu.be/rsb9s-mpvz8
thingiverse
free
V5 Hotend Capricorn XS by eferbel
...emos de asegurarnos que el barrel por dentro está limpio y que el tubo capricorn entrará suavemente hasta que tope con el nozzle.
thingiverse
free
AnyCubic I3 Mega board 120mm 25mm Fan support
...files for the new i3 mega board. thanks to eferbel and axl79com for this...
thingiverse
free
AI3M - Support spacer for 2 x Fan 40 x 10 (Drivers TMC 2208/2209) by eferbel
...ornillos de cabeza hexagonal m3 x 10 mm e imprimir el espaciador.
sigue las instrucciones del video.
https://youtu.be/qmakg2eq-tw
Anycubic
thingiverse
free
Anycubic i3 mega direct Titan Aero by Kyneq
...om the project https://www.thingiverse.com/thing:4361102
mount bltouch from the project https://www.thingiverse.com/thing:3065506
thingiverse
free
Anycubic Chiron线缆改装 by WuM
...ic chiron原装线缆特别容易损坏且不美观,新的设计增大了线缆的回转角度,线缆也换成了专用的拖链线缆以避免损坏,拖在地上的线也变得整齐了。因为原装线缆比较短,该设计最麻烦的地方就是需要自己做线,一共有3种端子(phb、ph-t、xh)嫌麻烦可以直接焊接。
thingiverse
free
Plotter attachment for Anycubic i3 Mega by ThomasKole
...adapter onto the print head's left screw.
you can use inkscape to turn svg's into gcode, what's what i use.
have fun!
thingiverse
free
Anycubic Mega Pro - Cable Holder by daedalas1981
... flush on the print head.
left side of the cable holder now flat for easier install and removal of the assisted bed level sensor.
thingiverse
free
Anycubic Mega Zero Control Box extension for Heated Bed Mosfet and Octoprint Pi by rixxka2000
...cy is not spot on
you will need 4x m3 40mm screws to attach base through to original top cover.
any questions please ask
thanks
thingiverse
free
Anycubic I3 Mega Filament Guide Bracked Remix by Desmoair
...is a remix of the bracked from the remix of the ender 3 filament guide. the bracket was designed to mount on an anycubic i3 mega.
thingiverse
free
Small Ball Mounting System (i.a. for CAMs like Pi, C270, GoPro) by wolwin_de
...c270/c310 focus ringhttps://www.thingiverse.com/thing:3750229 object connections for the 3d printer anycubic i3m two clip holders were added for the left/right...
thingiverse
free
Delta Corner Braces by 3dmpro
...3dmpro thingiverse inspired by the frame extension of the anycubic kossel linear, i developed an easy to print corner...
thingiverse
free
AI3M threaded spindle z-axis leading / Trapezspindelhalter by Schmelzerboy
...z-axis leading / trapezspindelhalter by schmelzerboy thingiverse trapezspindelhalter für anycubic i3 mega mit rillenkugellager typ 608 2rs c3 this...
thingiverse
free
A cutted version of max7th great Mark3 Design by DannyEss87
...to print with a smaller 3d printer, like the anycubic i3 mega. the basic model is from...
Mega
3d_export
$20
Loud Speaker 3D Model
...loud speaker 3d model 3dexport loud speaker megaphone mega phone loud speaker 3d model ailamvnn 69693...
3d_export
$79
Sega Megadrive 3D Model
...tage old retro photorealistic toy computer people play nostalgia classic cartridge
sega megadrive 3d model fabelar 29423 3dexport
3ddd
$1
Tolomeo Mega Sospensione Ø52
...tolomeo mega sospensione Ø52
3ddd
artemide
artemide tolomeo mega sospensione Ø52
cg_studio
$79
Timberwood Logs Mega Pack3d model
... ready
.obj .dae .c4d .3ds - timberwood logs mega pack 3d model, royalty free license available, instant download after purchase.
cg_studio
$29
Cardboard Boxes Mega Pack3d model
...n
.wrl .obj .dae .c4d .fbx - cardboard boxes mega pack 3d model, royalty free license available, instant download after purchase.
3d_ocean
$25
Mega Yacht
...lygonal model, easy to animate. - poly count: 2134 - formats: max /obj /fbx/3ds/dxf - high detail was preserved with 2048&...
3d_ocean
$6
Modular Building Mega pack 2
...le format so no need to worry about if they will work with you 3d program, as i have provide them in obj , 3ds, dxf and max so...
3d_ocean
$19
Low Poly Lantern Mega Pack
... wall lanterns, hand lanterns, post lights, candles and even chandelier! all assets are low poly and share only one 512...
3d_ocean
$21
60 Web and Social Media 3D Icons
...element evernote facebook flickr forrst google icon imdb media mega network pack paypal picasa pixel reddit round sixty skype...
3d_ocean
$15
Building Mega pack
...le format so no need to worry about if they will work with you 3d program, as i have provide them in obj , 3ds, dxf and max so...
I3
3d_ocean
$55
BMW i8
...bmw i8 3docean audi bavaria bmw car ferrari hybrid i3 i8 new rim series sport a very accurate model...
3d_ocean
$55
BMW i8 black
...i8 black 3docean audi bavaria bmw car ferrari hybrid i3 i8 new rim series sport a very accurate model...
3d_ocean
$89
BMW i3 2014
...y, in real units of measurement, qualitatively and maximally close to the original. model formats: - *.max (3ds max 2008 scanl...
3d_ocean
$89
BMW i3 2012
...y, in real units of measurement, qualitatively and maximally close to the original. model formats: - *.max (3ds max 2008 scanl...
3d_ocean
$29
Razer Christine
...christine 3docean 3d best blade christine computer core gamer i3 i5 i7 intel justtomas laptop model pc pro processor...
3d_ocean
$19
Razer blade 14
...blade 14 3docean blade 14 computer core gamer gt i3 i5 i7 intel justtomas laptop nvidia pro razer razer...
cg_studio
$99
BMW i3 Concept 20113d model
...i3
.3ds .c4d .fbx .lwo .max .obj - bmw i3 concept 2011 3d model, royalty free license available, instant download after purchase.
cg_studio
$99
BMW i3 20123d model
...tudio
.3ds .c4d .fbx .lwo .max .mb .obj - bmw i3 2012 3d model, royalty free license available, instant download after purchase.
cg_studio
$99
BMW i3 20143d model
...
cgstudio
.3ds .c4d .fbx .lwo .max .obj - bmw i3 2014 3d model, royalty free license available, instant download after purchase.
cg_studio
$50
Kitchen set i33d model
...el
cgstudio
.3ds .lwo .max .obj .pz3 - kitchen set i3 3d model, royalty free license available, instant download after purchase.
Fan
3d_export
$5
Ceiling fan 3D Model
...ort
ceiling room fan extractor extract interior 3d model light bulb blade rotor lamp
ceiling fan 3d model mimicmwb 24939 3dexport
3ddd
$1
STEALTH FAN
...stealth fan
3ddd
вентилятор
model included with texture
3d_ocean
$15
Westinghouse fan
...tinghouse fan, a great vintage interior set piece. all file formats are tested and work as they should and are subdivision ready.
3d_ocean
$39
Low Poly urban pack
...low poly urban pack 3docean bank buildings city dumpster fan fence flat furniture garbage generator high voltage hotel low...
3d_ocean
$7
Plane Low Poly (rigged)
...low poly low poly plane rigged vehicles wings plane fan and plane wheel door (open – close) rigged materials...
3d_ocean
$85
Scion FR S Cabrio 2015
...made at direction of the author and created for fan . so if you...
3d_ocean
$4
Facebook Like Thumb Up Hand Icon
...hand icon 3docean business button click clicked clicking facebook fan follow friendship internet like liked mouse social media thumbs...
cg_studio
$50
Baseball Stadium arena3d model
...sport arena game field city athletics sports audience crowd fan olympic dugout .obj .3ds .fbx .max - baseball stadium...
cg_studio
$35
Baseball stadium pitch diamond low poly3d model
...sport arena game field city athletics sports audience crowd fan olympic dugout .max .fbx .3ds .obj - baseball stadium...
3ddd
$1
TEFCOLD Минибар BA10H
...мини бар , бар product features: interior led light fan assisted cooling double glazed reversible door 2 adjustable shelves...
Support
3d_export
$12
Walking Canes 3D Model
...canes cane stick sticks assistive crutch crutches hiking camping support disabled staff aid balancing trekking poles gentlemen classic old...
3d_export
$50
Fast Food Restaraunt Set 3D Model
...restaraunt 3d models tables chair seats pan tray bottles support boxes interiors furniture fast food restaraunt set 3d model...
3ddd
$1
Neverending Glory
...the leadership of mozart himself. through this collection avid supportrs and lovers of stories and simplicity can acquire a...
3d_ocean
$2
Grassydirt
...2k dirt grassy ground textures grassydirt cg textures tileable support include : normal map + specular...
3d_ocean
$2
Deadgrass
...dead? i hope you come back to life! tileable supportd! have any problem? contact...
3d_ocean
$7
Substance Textures 2-Pack
...need to open them in unity, unreal, any other supportd game engine or substance designer itself) create hundreds of...
3d_export
$10
Bookend 3D Model
...bookend 3d model 3dexport bookend support books end bookshelf library sheetmetal metal home decor decoration...
3d_ocean
$2
Cementwall
...be careful! , cement walls were very sharp! tileable support have any problem? contact...
3ddd
$1
LEMA 3-POD
...tripod: a continuous symbol in chrome plated steel which support a plane—rectangular, round or drop-shaped in glass, wood, or...
3ddd
$1
Flexform Mood Drop
...by felxform/mood from drop collection. quad single model mesh. support ...