AnyCubic Funnel by phana007

...funnel anycubic-resin by zv3d thingiverse funnel for anycubic bottle resin

...nycubic resin funnel thingiverse small funnel fitting the anycubic resin bottles. does not have a snap fit, but neither to lose.

...by mrlnwbr thingiverse holds a filter on top of your 500ml resin bottle from anycubic. the filter has no contact to the funnel.

...und anycubic resin bottle, for easier emptying of resin vat sla printer resin resin vat funnel anycubic hobby diy hobby diy other

...he rings are missing on the original thing files) . included the original funnel file. press the two parts with the mesh between.

...r "anycubic basic" msla resin. specifically the 1kg bottle. it should work for others too depending on the bottle size.

...funnel printed by anycubic photon resin: anycubic grey layer: 0,05 normal exp. time: 10 s bottom exp. time: 60 s bottom layer: 10

...unnel for anycubic mono se resin vat by adriano3d thingiverse to empty resin from the vat (designed for vat of anycubic mono se)

...the nylon filter material (from the supplied filters in the anycubic photon) to be sandwiched between the funnel cup and nozzle.

...ter (1000ml) or 76mm diameter (500mm) also wanted a funnel that fit the cap of the bottle. to help refill.it using a paper filter

...eypad control cover shroud by phana007 thingiverse this is a keypad cover shroud for the wireless keypad. laser cut keypad cover

...acrylic, but it's actually modeled for 3mm acrylic. my son had a insect project and has chosen a bee as his insect of choice.

...isn't really needed as it's held in place by friction pretty well. there are 4mm holes if you with to screw the lid down.

... one with the hinge or without. the actual one was cut out of 4.8mm acrylic and the other is 3mm which wasn't cut in the end.

...model plane display trophy by phana007 thingiverse model plane

...ino ino file to suit your requirements. i've used this to enter in my user name and password with simply a click of a button.

...80 degrees and left the sheets in there for about approx. 6 mins so its bendable. get the source code from the sites above. enjoy

...l glide better across the board. i've cut and engraved this out of acrylic. purchased from http://www.cookiecakedesign.com.au

...e this for box cutting and scoring acrylic sheets to break apart. i've added the 123d design file for you to make amendments.

...placement for the wings of the gondala. i used 1.6mm acrylic and melted with a lighter and bent into shape. hot glued into place.

...metal chimney 3d model archive3d metal chimney chimney funnel metal chimney n061214 - 3d model (*.gsm+*.3ds+*.max) for exterior...

...вуют шейдера для corona-render и vray торшер н 155.5 см настольная лампа н 80 смhttp://www.vertigo-bird.com/en/node/59 

...ля современных так и для классических интерьеров.http://www.heals.co.uk/qmfyz/lamps/heals-funnel-floor-lamp/invt/542965 

... bevan funnell , круглый коллекция: mahogany бренд: bevan funnell страна: великобритания

...chimney 3d model archive3d chimney funnel smoke-stack chimney 150x1000 - 3d model for interior 3d...

... hall table 3ddd bevan funnell , консоль http://www.360.ru/goods/0/0/0/114178/ 

...metal chimney archibase planet metal chimney chimney funnel metal chimney n061214 - 3d model (*.gsm+*.3ds+*.max) for exterior...

...chimney archibase planet chimney funnel smoke-stack chimney 150x1000 - 3d model for interior 3d...

...water fluid laboratory lab utensils tools cookware pour car oil filter equipment petroleum funnel 3d model firdz3d 76732 3dexport

...capsule with shapekeys for open and closed<br>one sample tube<br>one funnellt;br>one watch glass<br>one volumetric test flask<br>two bottles<br>one drying rack<br>one pair...

...om the project https://www.thingiverse.com/thing:4361102 mount bltouch from the project https://www.thingiverse.com/thing:3065506

...ic chiron原装线缆特别容易损坏且不美观，新的设计增大了线缆的回转角度，线缆也换成了专用的拖链线缆以避免损坏，拖在地上的线也变得整齐了。因为原装线缆比较短，该设计最麻烦的地方就是需要自己做线，一共有3种端子（phb、ph-t、xh)嫌麻烦可以直接焊接。

...adapter onto the print head's left screw. you can use inkscape to turn svg's into gcode, what's what i use. have fun!

... flush on the print head. left side of the cable holder now flat for easier install and removal of the assisted bed level sensor.

...cy is not spot on you will need 4x m3 40mm screws to attach base through to original top cover. any questions please ask thanks

...is a remix of the bracked from the remix of the ender 3 filament guide. the bracket was designed to mount on an anycubic i3 mega.

...c270/c310 focus ringhttps://www.thingiverse.com/thing:3750229 object connections for the 3d printer anycubic i3m two clip holders were added for the left/right...

...3dmpro thingiverse inspired by the frame extension of the anycubic kossel linear, i developed an easy to print corner...

...z-axis leading / trapezspindelhalter by schmelzerboy thingiverse trapezspindelhalter für anycubic i3 mega mit rillenkugellager typ 608 2rs c3 this...

...to print with a smaller 3d printer, like the anycubic i3 mega. the basic model is from...